stationary monitoring system Articles

  • Two Detector Solution to Analyzing Sulfur

    Sulfur compounds are reactive, corrosive to pipes, and destructive to catalysts in petroleum refineries. Sulfur emission are strictly regulated globally. When released into the atmosphere sulfur dioxide converts to sulfuric acid resulting in adverse effects on human health and the environment. Sulfur detection is found useful in many other industries; therefore, detection of sulfur compounds in ...


    By Restek Corporation

  • Procedure Z: Quality assurance requirements for X-ray-fluorescence based multi-metals continuous emission monitoring systems at stationary sources case study

    Procedure Z outlines the continuing quality control and quality assurance requirements for an x-ray fluorescence based multi-metal CEMS. Procedure Z requires daily checks of the upscale, zero and volume measurement drift. It also specifies quarterly checks of the x-ray fluorescence calibration and of the volume measurement calibration. Finally procedure Z requires that the entire XRF multi metal ...


    By Cooper Environmental

  • Performance specification YY: Specifications and test procedures for Xray fluorescence based multi-metals continuous emission monitoring systems at stationary sources case study

    Performance Specification YY details the performance requirements for a multi-metals continuous emissions monitor that utilizes x-ray fluorescence (XRF) as an analytical technique. Each XRF based multi-metals CEMS must meet the criteria for accuracy, stability, and instrumental response laid out in this document. In addition, every XRF multimetals CEMS must meet the installation requirements in ...


    By Cooper Environmental

  • Mobile Stationary Source Emissions Testing, Coming to a Facility Near You?

    Last week, Antea Group had the unique opportunity to perform a RATA (relative accuracy test audit) of the emissions from a thermal oxidizer at an ethanol production facility located in Minnesota using a state-of-the-art mobile testing laboratory. During this RATA audit, actual stack emissions levels (including NOx, SOx, CO2, CO, O2, flow rate, temperature, velocity and pressure) from the ...


    By Antea Group - USA

  • Monitoring Oil in Cooling Water

    The Situation A municipal power plant in the southern United States operates more than 10 stationary power plant engines capable of producing 52 megawatts of electric power. The plant is part of a larger statewide power grid system. Within the grid, the municipality brokers the purchase or sale of power hourly, based on the needs of municipality and the market rate for power on the grid ...

  • Urban Noise Monitoring in Madrid

    Dynamic mapping helps Madrid improve the quality of life for her citizens and visitors alike. With its 3 000 000 inhabitants and 2500 km of streets, Madrid is an excellent example of what can be done to improve human comfort related to urban noise. Since the late 60s, Madrid City Council has been working on noise problems. During this period, global environmental analysis has focused on how ...

  • Monitoring Environmental Quality

    ' In order to determine the effectiveness of actions to improve environmental quality it is necessary to be able to measure relevant environmental parameters at a level of detail which is accurate enough to distinguish the anticipated changes. However, the establishment and maintenance of monitoring systems is time-consuming and expensive and therefore the scale of such systems needs to be kept ...


    By The World Bank

  • Unmanned remote and wireless CDM monitoring case study

    Remote and wireless monitoring technology to meet CDM requirements is in its infancy in Europe. Carbon trading is driving it globally, especially in North and South America. That experience and technology is now finding a demand in Europe and Asia in landfill, biogas from food and animal waste in digesters and water treatment sludge digestion. Methane recovery from landfill and anaerobic ...


    By Geotech

  • Where Did These New Quality Assurance Requirements for Opacity Monitors Come From?

    U.S. EPA promulgated the long awaited ‘‘Quality Assurance Requirements for Continuous Opacity Monitoring Systems at Stationary Sources’’ used to demonstrate continuous compliance with opacity standards specified in new source performance standards (NSPS).  This has an effective date of November ...


    By All4 Inc.

  • NOx in Non-Utility Industries - Part II - Control options and monitoring methodology

     This the second in a two-part series. Part I, which appeared in our June 2001 issue focuses on air emission origins of nitrogen oxides (NOx) in non-utility industries. Choice of the NOx control technology is dependent on many factors, including regulatory requirements, technical feasibility, cost and public perception. Figure 1, compiled based on publications [1-5], presents a summary of ...


  • Performance-Based Measurement Systems

    Many of the Environmental Protection Agency's (EPA's) methods used to monitor air, water and soil for environmental contaminants prescribe step-by-step details on how the chemical analysis must be conducted and prohibit any deviations or variations. The EPA has recognized that monitoring equipment and technology have improved tremendously over the last few years; that environmental media do not ...


    By WSP | Parsons Brinckerhoff

  • NOx in Non-Utility Industries - Part I NOx in Non-Utility Industries - Part I - Air emission origins, best control solutions and monitoring methodology for nitrogen oxides

     Problems with reducing nitrogen oxides (NOx) are widespread in the general process industries. These industries, together with medium size utility and power generators contribute about 15 percent of global NOx emissions. The emission sources addressed include various heaters employed in chemical and petrochemical plants, nitric and sulfuric acid plants, glass furnaces, iron and steel mills, ...


  • Trends and projections in the EU ETS in 2016 — The EU Emissions Trading System in numbers

    About this report This 2016 report of the European Environment Agency (EEA) provides an analysis of past, present and future emissions trends under the EU Emissions Trading System (ETS), based on the latest data and information available from the European Commission (i.e. May 2016 data on verified emissions and compliance by operators under the EU ETS for the years up until 2015) and Member ...

  • Understanding the CARB Refrigerant Gas Management regulations (2010 early actions)

    Many of today's AC/HVAC systems and refrigerant products have high global warming (GWP) potential emissions. These include air conditioning (AC) in cars, homes and office buildings, commercial and home refrigerators, fire suppressant systems, and much more. Many of today's AC/HVAC systems and refrigerant products have high global warming (GWP) potential emissions. These include air conditioning ...


    By Verisae

  • California Global Warming Solutions Act (AB 32): Early actions for refrigerant gas management

    How to stay ahead and address the early action requirements for Stationary Equipment Refrigerant Management to be included in updates to AB 32. The California Global Warming Solutions Act (AB 32), first passed in 2006 with additional early actions taking effect in 2010, is a broad and comprehensive directive with the goal of reducing greenhouse gasses (GHGs) by approximately 25% by the year ...


    By Verisae

  • Online discharge measurement with horizontal doppler-flow sensor

    Background The regional authority responsible for the barrages in the Free State of Saxony is in charge of the water management of the Rötha. Reservoir. This reservoir is situated close to the river Pleiße, from which the water is led over a weir into the reservoir.. Knowledge about the inflows of the reservoir is important for the water management there. So far, the ...

  • California Air Resources Board (CARB) places higher restrictions on air pollution

    As part of the California Global Warming Solutions Act (AB 32) the Air Resources Board (ARB) has approved an early action measure to reduce high-global warming potential (GWP) greenhouse gas (GHGs) emissions by establishing new legislation and defining requirements related to improved monitoring of AC/HVAC systems, enforcement of regulations, reporting of refrigerant usage, and recovery, ...


    By Verisae

  • Measuring SO2 ship emissions with an ultraviolet imaging camera

    Over the last few years fast-sampling ultraviolet (UV) imaging cameras have been developed for use in measuring SO2 emissions from industrial sources (e.g. power plants; typical emission rates ~ 1–10 kg s−1) and natural sources (e.g. volcanoes; typical emission rates ~ 10–100 kg s−1). Generally, measurements have been made from sources rich in SO2 with high concentrations ...

  • Uncoated and coated ZnO nanoparticles life cycle in synthetic seawater

    The increasing production of nanoparticles has raised strong concerns regarding their environmental release. In nanoparticles life cycle scenarios, marine systems constitute one of the main final compartments, and nanoparticles fate in these environments needs to be assessed. Here, dissolution kinetics of commercial uncoated and organic‐coated ZnO nanoparticles in synthetic seawater has been ...


    By John Wiley & Sons, Ltd.

  • F gas regulations aim to improve climate and reduce global warming

    Fluorinated greenhouses gases, also known as F Gas, are being closely regulated by the United States and many other foreign countries because they can cause harmful climate change. The U.S., Canada and member countries of the European Union have imposed regulations aimed at containing or phasing out certain substances that increase global warming. F Gas is commonly found in stationary ...


    By Verisae

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you