steam plant Articles

  • Exergoeconomic optimisation of steam power plant

    The second law of thermodynamics combined with economics forms a powerful tool for systematic analysis and assessment of energy systems. This paper presents an exergoeconomic optimisation of 50 MW steam turbine power plant associated with a large fertiliser industrial unit through Thermoeconomic Evaluation and Optimisation (TEO) method, and identifies the losses in various components. As the ...


    By Inderscience Publishers

  • Cogeneration steam power desalting plants using steam turbines

    This paper presents the reasons and merits of using cogeneration generation power desalting plants (CPDP), the different methods used to rate their performance, and their drawbacks. The ratings of the CPDP are crucial, because the fuel cost allocation between the water and power depends on the rating method used. The ratings are usually based on the first and the second laws of thermodynamics. A ...


    By Inderscience Publishers

  • Reduced Emissions for Landfill Gas Installations

    The use of landfill gas as a source of renewable energy is increasing. For environmental and safety reasons, the owners of the waste storage sites have to strictly monitor and control the construction, operations, and emissions generated. Sulzer offers solutions to control these emissions within the limits given by the government. Landfill gas is similar to natural gas, but it is created by ...


    By Sulzer

  • Exergetic destructions in steam generation system: Azzour plant

    The aim of this research is to investigate the exergetic destructions of Azzour steam generation system. The exergy destructions (irreversibilities) of the steam generation system were analysed based on actual plant operating data. Three irreversible processes were investigated; combustion, heat transfer and streams mixing processes. Sensitivity analysis was carried out to study the effects of ...


    By Inderscience Publishers

  • Seven Ways Your Facility Isn’t Meeting Effluent Regulations and How to Solve Them

    Whether you own, operate, or help manage a municipal or industrial facility that deals with wastewater, it’s important to understand how wastewater treatment can play a significant role in the overall health of your business, especially when it comes to meeting effluent regulations. This is an important part of the wastewater treatment process to consider, as ignoring it could earn your ...


    By SAMCO Technologies, Inc.

  • Mechanical Steam Trap Failure

    Condensate traps are commonly employed to remove condensed water from steam utilising plant and equipment.  In this context they are normally referred to as steam traps. There are many different designs of steam traps to suit a variety of circumstances. The majority of traps involve a self-actuating mechanism which detects the presence of condensate in the ...


    By EBE Engineering Ltd.

  • Full steam ahead

    RemedX managing director Richard Croft explains why thermal remediation techniques are good value even at a time of recession. In-situ thermal treatments of soils are usually applied in conjunction with other technologies. The process involves heating contaminated soils, rock and groundwater to exploit resulting physical and chemical effects on the contaminants present. To understand the ...


    By Newzeye Ltd

  • Exergy and exergo–economic evaluation of Isfahan steam power plant

    The objective of this paper is to perform the exergy and exergo–economic analysis of Isfahan steam power plant. A simulation program is used for modelling the Isfahan steam power plant in Iran. The exergy balance is used to estimate the exergy destruction in each component of the plant. Moreover, the cost balance equations are solved to determine the cost of exergy destruction in each part of the ...


    By Inderscience Publishers

  • Renewable Energy: the steam production plant at Reinsberger Spezialpapier is in operation

    Residual products from the paper recycling plant are used directly to produce steam for the paper factory. An interesting alternative of renewable energy solutions. Typical tasks: You have to dispose production residues You need a low cost and future safe energy production Our solution: Usage of the ...


    By Michaelis GmbH & Co. KG

  • Exergoeconomic analysis of a Kalina cycle coupled coal–fired steam power plant

    This paper presents exergoeconomic analysis of a Kalina cycle coupled coal–fired steam power plant using specific exergy costing (SPECO) methodology. Cost–balance and auxiliary equations are developed and solved. The results indicate that in the topping cycle, the boiler and the turbine contribute maximum to the formation of product cost. High value of exergoeconomic factor for the boiler ...


    By Inderscience Publishers

  • In situ weld repair of blade tenon of steam turbine in a power plant

    During one of the routine inspections in a nuclear power plant, it was found that a tenon of one of the third-stage blades of the Low-Pressure (LP) turbine had been worn/broken off the turbine blade, leaving only the remaining tenon riveted to the shroud piece. With only one of the two tenons remaining, the blade was at risk of getting freed from the shroud piece. Hence, it was necessary to ...


    By Inderscience Publishers

  • Evaluation of a process simulator for modelling and analysis of Rankine cycle steam power plants

    Applicability of the HYSYS process simulation package to thermodynamic modelling and analysis of Rankine cycle steam power plants, using first and second law analyses, has been evaluated. Theoretical Rankine cycles, and more realistic cycles based on power plants modelled in other studies, were simulated. Energy, exergy and efficiency values determined from the simulations were compared to those ...


    By Inderscience Publishers

  • The 700?C steam turbine power plant ? status of development and outlook

    This paper appraises the current development status of the 700?C steam power plant under consideration of process optimisation as well as design aspects of the steam turbine and steam generator. The results for a compact arrangement of the steam turbine and steam generator are also presented. Based on a cycle analysis, a net efficiency between 49.3% and 51.4% can be achieved with the 700?C steam ...


    By Inderscience Publishers

  • Exergy analysis of a steam power plant: a case study in Iran

    In the last decades, exergy analysis, based on the second law of thermodynamics was a method that substituted the energy analysis in studying thermodynamic systems. In this paper, the cycle of a power plant and its details, with two kinds of fuels, natural gas and diesel, have been analysed at its maximum load and the two factors, losses and exergy efficiency, which are the basic factors used to ...


    By Inderscience Publishers

  • Early Ethylene Glycol Leak Detection in Power Plant Steam Condensate Is Essential

    Fossil fuel and nuclear power plants use heat exchangers to condense process steam back into liquid form. A heat exchanger works by transferring heat from one medium (steam) to another medium (air, water, or ethylene glycol). Many newer, closed cooling water system, power plants use ethylene glycol use ethylene glycol (C2 H6 O2 ) as a heat transfer fluid because of its high-heat transfer ...


    By GE Analytical Instruments

  • Solar powered mini steam power plant: a simulation approach

    The solar powered steam power plant is a mini power plant that is meant to generate power at the location of the consumer hence playing a pivotal role in distributed power generation. This plant will also have a huge impact on the environment as it utilises the sun's energy, making it eco–friendly and reducing its impact on the environment by reducing the amount of fossil fuel consumption. In ...


    By Inderscience Publishers

  • Diageo installs gem steam traps

    Diageo’s 18-acre Runcorn facility is making savings in energy, replacement costs and maintenance of its steam traps following the installation of Thermal Energy International’s Venturi Orifice GEM traps.  Thermal Energy International (TEI) has installed a total of 71 steam traps through the plant, which has provided Diageo with a payback in less than 12-months. The Diageo Runcorn ...

  • Efficient steam production in paper mills

    The paper and pulp industry is an energy and emission intensive industry. Steam is an essential part of the paper making process with steam boilers, steam distribution systems and other processes accounting for a large percentage of a paper mill’s energy costs. Useful energy is often lost from boilers and process equipment such as heat exchangers, dryers, evaporators etc, as well as from ...

  • Wasting energy through steam loss

    The European Union Directive on the Energy Performance of Buildings, which relates to all member nations of the European Union, are obliged to set limits on greenhouse gas emissions, particularly from buildings. Typically steam is used for a wide range of applications within larger establishments including, humidification, hot water, space heating and air heating.  Primary energy losses in ...

  • Steam injection heating of biosolids & sludge for Anaerobic Digestion

    The article focuses on the integration of Direct Steam Injection (DSI) heating as a method for heating of Municapal, Industrial, Food, & Agricultural wastewater streams. Common applications are anerobic digestion, biogas production, waste de-activation, and FOG (Fats-Oils-Grease) heating. Topics covered include how DSI works, how to select a DSI heater suitable for viscous & difficult to ...


    By ProSonix

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you