steam thermal oxidizer Articles

  • Growing hydrogen expectations: embedded catalyst design for active and stable catalysts

    Hydrogen as an energy vector in combination with fuel cells is one of the emerging energy solution in terms of sustainability and low environmental impact. H2 sustainable production is therefore one of the key target of today. Recently, the Materials, Environment and Energy research group at the University of Trieste, coordinated by Professor Paolo Fornasiero investigated various options for H2 ...


    By Hiden Analytical Ltd.

  • Air Pollution Control in the Printing and Web Coating Industries

    For many U.S. companies in the printing and web coating business, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new.  In these industries, depending upon their location, companies have been installing APCS since the early 1970's.  However, for some companies the clock is still ticking regarding their compliance with local, state and federal ...


    By The CMM Group, LLC

  • Case study -Operating cost reduction strategies

    Overview More and more, companies operating air pollution control equipment today realize that the initial capital cost of an oxidizer system can be rapidly eclipsed by continued operating expenses if careful attention is not periodically given to the system. ACTION Below are ten tips to ensure your oxidizer is operating at peak performance. The ...

  • Oil and gas industry process analytics in ethylene production plants – Case Study

    Ethylene is the largest volume industrially produced organic material and its majority is used in the production of polymers and derivatives. Between a variety of processes the thermal cracking of hydrocarbons in the presence of steam (steam cracker) is mostly used. Regardless of the process type, all plants require process analytical equipment to collect reliable and accurate process data for ...

  • A Faster and Better FluidScan with Version 5

    Measure water contamination in turbine oils down to 300 ppm The latest version of FluidScan software can detect total water presence as low as 300 ppm in turbine oils.  The method provides an alternative to laboratory tests such as Karl Fischer titration when fast, simple, and reagent-free analysis is needed. In addition to measuring water contamination, the FluidScan ...


    By Spectro Scientific

  • Put energy into emission control projects

    Many companies feel pressured to spend the least amount possible to meet environmental regulations, primarily because compliance isn’t a profit generating endeavor. What some environmental and compliance managers fail to realize is that emission control equipment can quickly become a profit decreasing endeavor with this penny wise-pound foolish approach. With mandatory greenhouse gas (GHG) ...

  • Data Requirements for Soil, Sediment, and Sludge

    Site soil conditions frequently limit the selection of a treatment process. Process-limiting characteristics such as pH or moisture content may sometimes be adjusted. In other cases, a treatment technology may be eliminated based upon the soil classification (e.g., particle-size distribution) or other soil characteristics. Soils are inherently variable in their physical and chemical ...

  • Case study: Hunters Point

    In Situ Thermal Remediation with Gas Thermal Remediation (GTR©) is being used to remove NAPL contaminants from a former military base. The system is extracting nearly 1,000 liters of liquid waster every week. LNAPLs, such as fuel and oils, and DNAPLs, such as PCBs and chlorinated solvent, are being removed from the subsurface to make way for a residential homes. In Situ+NAPL ...

  • Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you