steam turbine control system Articles

  • Reduced Emissions for Landfill Gas Installations

    The use of landfill gas as a source of renewable energy is increasing. For environmental and safety reasons, the owners of the waste storage sites have to strictly monitor and control the construction, operations, and emissions generated. Sulzer offers solutions to control these emissions within the limits given by the government. Landfill gas is similar to natural gas, but it is created by ...


    By Sulzer

  • Upgrade of turbine intake damper controllers on SS Cape Isabel - Case Study

    Overview SS Cape Isabel is a 655ft, 15,000 ton roll on/roll off cargo ship based at Long Beach and operated by the US Military Sealift Command. Launched in 1976, the ship is powered by two steam turbines. The Reason The ship’s two turbine intake radial vane dampers were equipped with pneumatic controllers (actuators) which were now obsolete. The old ...


    By Rotork

  • NOx formation by steam injection using detailed chemical kinetics

    In order to improve thermal efficiency of gas turbine system and better control NOx emission, the injection of steam into a gas turbine combustor has been employed. This study has used both chemical equilibrium calculations and the counterflow diffusion flame calculations of methane-air flame aiming at the elucidation of the NOx reduction mechanism due to the steam injection. The influence of the ...


    By Inderscience Publishers

  • Wet electrostatic precipitators: A preferred technology for emission control

    The basic science behind electrostatic precipitators is as familiar and as simple as static cling. But today, this elemental force has been harnessed to a technology that is helping to remove millions of tons of toxic chemicals from our atmosphere; saving billions of dollars annually in pollution-related physical damage; and averting costly impacts on health and mortality rates for millions of ...


    By Beltran Technologies, Inc.

  • PRME Naturally Gas Systems

    Your PRME Naturally produced biogas will come from biomass – not fossil fuels. Technically speaking, you will be firing gas produced by the thermal gasification of biomass. PRME’s NaturallyGas process design is not experimental or “under development”, but has been commercially firing industrial boilers for over eighteen years. PRME’s NaturallyGas Systems are ...


    By PRM Energy Systems, Inc.

  • What Is a Boiler Feed Water Treatment System and How Does It Work?

    For industrial companies using a boiler for its facility, some type of boiler feed water treatment system is usually necessary to ensure an efficient process and quality steam generation. The most appropriate boiler feed water treatment system will help the facility avoid costly plant downtime, expensive maintenance fees, and boiler failure as a result of scaling, ...


    By SAMCO Technologies, Inc.

  • NOx in Non-Utility Industries - Part I NOx in Non-Utility Industries - Part I - Air emission origins, best control solutions and monitoring methodology for nitrogen oxides

     Problems with reducing nitrogen oxides (NOx) are widespread in the general process industries. These industries, together with medium size utility and power generators contribute about 15 percent of global NOx emissions. The emission sources addressed include various heaters employed in chemical and petrochemical plants, nitric and sulfuric acid plants, glass furnaces, iron and steel mills, ...


  • Advanced, integrated systems meet the challenges of commercial-scale operation

    Technological frontiers in die alternative energy industry continue to widen in countries around the globe. As such, die exploitation of biomass as a source of energy has become die fastest-growing sector among a growing roster of energy solutions. Today, more energy is produced from various forms of biomass dian from all wind, solar and geodicrmal applications combined. Much of die excitement ...


    By Beltran Technologies, Inc.

  • Case Study - Aluto Langano Power Plant Rehabilitation

    Aluto Langano, Ethiopia – 2007 The Aluto Langano Geothermal Pilot Plant (ALGPP) is located on the Aluto volcanic complex of the Ethiopian Rift valley, close to the eastern escarpment between Lake Langano and Lake Ziway, some 200 km southeast of Addis Ababa. The Aluto volcanic complex is a young acidic system consisting of domes, lava, and pyroclastic interbeds. The geothermal field was ...

  • Case Study - 6MW Non-Condensing Power Plant

    Lihir Island, Papua New Guinea – 2003 First Geothermal Power Station in PNG: Press Release, April 16, 2003 Lihir Gold Limited “Gold company Lihir Gold Limited is turning its vast geothermal resource into an opportunity. In April, the company started commissioning a 6MW geothermal power station, the first in Papua New Guinea to use natural geothermal ...

  • Case Study - 2.0 MW Nominal Geothermal Power Plant

    Lake Naivasha, Kenya – 2007 Under a contract signed in June 2006 with Oserian, Geothermal Development Associates (GDA) agreed to design, manufacture, inspect, test, pack, and ship a 2 MW nominal geothermal steam turbine generator and related power plant auxiliary components from Reno, Nevada, USA to the Oserian flower-growing facility near Lake Naivasha, Kenya. GDA will provide technical ...

  • Power Industry using Micro-Media Filtration and short-bed ion exchange

    With the demand or higher efficiencies, lower maintenance and operating costs for boilwers and turbines, high-purity water treatment systems are becoming more crucial to the operation of power plants. Modern power plants, operating at supercritical and ultra upercritical boiler pressures and temperatures, require high-purity water that approaches quality levels at the theoretical levels. ...


    By Eco-Tec Inc.

  • Case Study - 30MW Single Flash Power Plant and 20 MW Expansion

    Lihir Island, Papua New Guinea – 2005 In December 2003, Lihir Management Company awarded GDA a contract for supply and site supervision for a 30MW (net) geothermal power plant. In 2005, Lihir contracted with GDA for an additional 20 MW of plant equipment. The picture at the right shows the main power house and annex under construction. The power house is the larger open section which ...

  • Cogen plant produces distilled water for resale

    The Facility Panda Energy’s power plant located in Brandywine, Maryland is a cogeneration facility that produces electricity by using gas and steam turbines. The Problem The objective of Panda Energy was to achieve Qualified Facilities (QF) status at their Maryland location. To achieve this, they had to produce distilled water using the steam from ...

  • 1st Tech applications range case study

    Paper industry: roller, air compressor, after cooler, calender bowl, chemical scrubber, closed cooling system, condenser, cooling tower, gas cooler, heat exchanger, intercooler, filtrate tank, filtrate pipe, vacuum filter, vacuum pump, slush pump, lime pump, evaporimeter, digester, scrubber, flow box, squeezer, indirect cooler, absorption plant, gas steam room, steam ...


    By Mibo International Corp.

  • 2 MWe Biomass Power Plant Case Study

    This 2 MWe Biomass Power Plant is one of the turnkey products of Biomass Power. The plant was fully commissioned in September 2007. The plant has a capacity of 11 MW thermal and rated at 2MWe producing 15,700 MWh of green electricity per year, 100% of which is exported to the grid. The fuels used are from forestry and agricultural residues, wet woodchips, compost oversize, straw and miscanthus, ...


    By Biomass Power Limited (BPL)

  • 4.5 MWe Refuse Derived Fuel to Energy Plant Case Study

    This 4.5 MWe Biomass Power Plant is one of the turnkey products of Biomass Power. The plant has a capacity of 24 MW thermal and rated at 4.5 MWe producing 35,476MWh of green electricity per year, 100% of which is exported to the grid. The fuel used is segregated biomass from a commercial and industrial waste collection business. The fuel is produced by removing some of the recyclable material ...


    By Biomass Power Limited (BPL)

  • Thermal Power - Guidelines for New Plants Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Reliable silica monitoring supports power station efficiency

    West Burton B CCGT is a Combined Cycle Gas Turbine power station near Nottingham in the UK. It has three open-cycle gas turbines capable of generating enough electricity for approximately 1.5 million UK homes. In common with all combustion based power stations, the CCGT has a requirement to monitor silica levels in the Plant’s water and steam processes. Sean Todd, the Plant’s Control ...

  • Common Boiler Feed Water Treatment Issues and How to Avoid Them

    When treating boiler feed water (the combination of boiler makeup and condensate return water), several issues can arise that cause boiler scaling, corrosion, fouling, and system failure. Below, we break down the most common boiler feed water issues and how to avoid them to help ensure system efficiency and operational safety. While treating boiler feed water is extremely ...


    By SAMCO Technologies, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you