steel secondary containment Articles

  • Case study - RTO handles high VOC loading at silgan containers

    OVERVIEW Regeneration Game - Originally printed in The Canmaker Magazine - Sayers Publishing Group As the first generation of oxidizer systems in the industry nears the end of their service life, many canmaking plants face repair or replacement of their existing air pollution control systems. Like many others in the industry, a Silgan canmaking plant in the ...

  • 1st coating of DeconGel 1101 on concrete, carbon steel, stainless steel, and plexiglas coupons contaminated with AM-241, Pu-239, and Cs-137

    Radionuclide Solutions The radionuclide solutions used to contaminate these coupons are NIST traceable. The Am-241 solution was prepared from AmCl3 dissolved 1 N HCl. The Pu-239 solution was prepared from Pu(NO3)4 dissolved in 4 M HNO3. The Cs-137 solution was prepared from CsCl dissolved in 0.1 M HCl. I have included all Certificates of Calibration for the stock solutions. For all ...


    By KT Chemicals, Inc.

  • EPA Proposes Revisions to RCRA Definition of Solid Waste

    On June 30, 2011, U.S. Environmental Protection Agency (EPA) Administrator Lisa Jackson signed a proposed rule seeking to narrow certain recycling exemptions under the Resource Conservation and Recovery Act's (RCRA) "Definition of Solid Waste" (DSW) provisions. The rule should be published in the Federal Register within the next two weeks. A pre-publication copy of the rule and related ...


    By Bergeson & Campbell, P.C.

  • Bulk Storage and Piping Case Study

    Background: This major steel manufacturer was founded in 1900 in and established the first formal research department in the steel industry in 1910. It grew through the development of specialty steels and new technology. Among the many "firsts" was the development of continuous rolling technology. This company holds more U.S. patents than any other specialty steel company. ...


    By Mech-Chem Associates, Inc.

  • Wyman Gordon Case Study

    Wyman-Gordon is a world class materials company with nearly 200 years of metals engineering experience. They are the acknowledged leader in the production of high-quality closed-die forgings and extrusions for the most critical applications. Markets served include those for commercial and military aircraft; gas turbine engines; oil and gas exploration; land based gas turbine and power generation; ...


    By Mech-Chem Associates, Inc.

  • Safer drum handling with morse drum lifters from interstate products

    Interstate Products, Inc. (IPI), the leading provider of spill containment products and the preferred source for environmental and industrial solutions offers a wide variety of Morse Drum Lifters that are designed for safer handling of large steel, plastic and fiber containment drums. IPI’s expanded selection of drum lifter hoist attachment options are designed for material handling safety ...


    By Interstate Products Inc

  • Tire Shredders: An Introduction

    How Does a Tire Shredding Machine Work? Tire shredding is a very common way of preparing scrap tires for disposal or recycle. In order to dispose of tires in a landfill, they must be shredded to various sized chips. The size required depends on the state or area you live in. Tire shredding is also used for recycling tires; crumb tire or tire mulch can be reused to create surfaces on ...


    By ECO Green Equipment

  • Baseline Projections of Selected Waste Streams

    Abstract Waste represents an enormous loss of resources both in the form of materials and energy. Indeed, quantities of waste can be seen as an indicator of the material efficiency of society. Waste generation is increasing in the European Union, and amounted to about 3.5 tonnes of solid waste per person in 1995 (excluding agricultural waste) 1 Excessive quantities of waste result from: ...

  • Identification and control of safety and health hazards in metal scrap recycling

    The audience for this guide is anyone who works in the metal scrap recycling industry—employers, employees, safety professionals, and industrial hygienists—should read this publication. This guide can help you identify and manage the hazards associated with exposure to various metals and processing chemicals and with related processes and equipment used in metal scrap recycling operations. Why is ...

  • City of Aurora, Oregon - Case Study

    In late 2009, Water Works Engineers contacted AdEdge to design and implement an arsenic, iron, and manganese removal system to serve the City of Aurora, Oregon. The existing water supply consisted of three wells feeding into a centralized distribution system with a maximum combined capacity of 500 gpm. The site had an arsenic level of 12 ppb, above the EPA's MCL of 10 ppb. The City of Aurora also ...

  • Chignik Lake, Alaska: Remote Community Water Treatment Plant Pilot Testing

    Chignik Lake, Alaska is a small community located on the south side of the Alaska Peninsula. The community’s only potable water source is one groundwater well, which is located within close proximity to potential contamination sources. Due to this threat of contamination and per the recommendations contained in the sanitation facilities master plan completed on behalf of the community in 2000, ...

  • Case study - Allburn Incinerators

    PROJECT 19 off containerised Allburn 3 Incinerators World Health Organisation—Ethiopia PROJECT DESCRIPTION Top loaded, diesel fired, low capacity incinera-tors, factory -installed within 20’ ISO shipping containers, for the disposal of bagged general/clinical waste from hospital and clinics, animal and industrial waste. To be ...


    By Todaysure Limited

  • Town Branch WWTP Controls Odors with Modular Covers

    The Customer: The Town Branch Wastewater Treatment Plant located in Lexington, Kentucky, USA, serves a population of 130,000—about 60 percent of Lexington-Fayette County. The plant began operating in 1919, and currently treats almost 11 billion gallons of wastewater annually. The Customer’s Needs: The Town Branch Wastewater Treatment Plant ...

  • Morse Drum Rollers from IPI Offer Ergonomics and Safer Handling

    Interstate Products, Inc. (IPI), the leading provider of spill containment products and the preferred source for environmental and industrial solutions offers a wide variety of Morse drum rotators and drum tumblers that are designed for safer handling, mixing and pouring from large steel, plastic and fiber containment drums.  Portable drum rotators and tumblers are ideal for industrial users ...


    By Interstate Products Inc

  • Ultimate Linings Best| Industrial Coatings| Protective Coatings

    Industrial coatings are generally used to diminish the effects of corrosion thus preventing the metal from being tarnished or damaged. Industrial protective coating enhances the finesse of the metal or material which in turn improves the quality. The ...


    By Ultimate Linings

  • Is it time to recycle more nickel?

    Now you might think me a little sad, but I have to confess that as a metallurgist, I always find it interesting just how closely the history of mankind is linked to advances in metal working. The first evidence of metal working in Europe dates from around 5500 BC with the extraction of copper, lead and precious metals and this was followed by the working of bronze from around 4000 BC, both of ...

  • New solid waste definition proposed

    When the Boiler MACT rule was vacated in 2007, one key element in the court challenge was that many non-fossil fuel materials burned in industrial boilers should be classified as solid wastes and regulated accordingly. Along with the recently proposed Boiler MACT and rules for commercial/industrial/solid waste incinerators (CISWI), EPA proposed criteria to determine whether non-hazardous ...


    By Trinity Consultants

  • Project profile - McGraw Hill, East Windsor, NJ iron & manganese removal system

    Background In late 2007, AdEdge began working with Maser & Associates to assist with design and implementation of an iron and manganese removal system to serve the water supply for the McGraw Hill data center in East Windsor, New Jersey. The site had an existing groundwater supply well with unacceptably high levels of iron and manganese to serve as feed water for the facilities ...

  • Tips To Use a Portable Steamer Machine for Cleaning Retail Stores

    Portable steam cleaner machines are widely used for cleaning retail stores and shopping centers. These are used mainly for cleaning the hard floor and hard wood surfaces. These can also be used to clean metallic parts, toilets, and bathrooms. A secondary use of vapor steamers is to spot clean mats and carpets.  A number of portable steam cleaner models are available on the Internet. The ...


    By Daimer Industries Inc.

  • Case study - Carbon fibre: furnace & oven emission control

    Overview A carbon fiber company in China was faced with the challenge of selecting an emission control system for a new pilot line at their specialty fiber products facility. The line would include furnaces and three ovens, both of which would emit Carbon Monoxide (CO), Ammonia (NH3) and lethal amounts of Hydrogen Cyanide (HCN).   Action ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you