steel water tank Articles

  • How Seismic Use Group Classification affects your Water Storage Tank

    When purchasing a bolted steel tank or a welded steel water storage tank, one of the key criteria determining the design parameters of the tank is the Seismic Use Group (SUG) classification. The term Seismic Use Group is essentially the same as the terms Occupancy Category and Risk Category used by the International Building Code (IBC) and the ...


    By Superior Tank Co., Inc.

  • 445 Sectional Steel Water Tanks Case Study

    These images show a large sectional steel tank before any preparation work and then after preparation. The large sectional steel tank was fully relined with Acothane DW. A lining system was required for a newly constructed sectional steel effluent tank located at a cheese factory in the South West. The large sectional storage tank is sized at approximately 33m x 2.4m x 3.6m (with no roof) and ...


    By Acothane UK Ltd

  • Scrubber Removes Grease and Particulates from Air Exhaust

    Operating Issue A food-industry leader in Alabama operates several pork-sausage cookers that exhaust over 4,000 ACFM of moisture and pork grease. The operator installed Electrostatic Precipitators (ESPs) to treat the exhaust but these systems performed poorly and generated high maintenance and operating costs. Additionally, these systems were antiquated and required significant capital ...


    By Pollution Systems

  • Water Tanks

    If you need to transport large amounts of water for your business, no matter what your business may be, you’re going to need a water tanker – and there’s no better place to get just what you need than here at Amthor International. Here at Amthor International, we provide a wide variety of options so that you can customize your water tanker to fit your specific needs. ...


    By Amthor International

  • Five Critical Parts For Your Steel Storage Tank

    Every year, we sell hundreds of parts for bolted tanks and welded steel tanks. Even though many ground storage tanks needing parts were not originally manufactured by Superior Tank Co., Inc., we can provide standard replacement components for steel storage tanks or can fabricate custom parts and accessories to ...


    By Superior Tank Co., Inc.

  • Pt. Lisas, Trinidad Receives 2 State-Of-The-Art Glass-Fused-To-Steel Water Storage Tanks as Part of Nation’s First Water Recycling Project for Water

    Florida-Aquastore, an authorized CST dealer serving the water storage and wastewater market across the state of Florida, the Caribbean, and Central and South America, has completed construction on two glass-fused-to-steel tanks at Point Lisas in Trinidad – the twin island country off the northern edge of South America.  The tanks were part of a $167,000,000 USD upgrade to the Beetham ...


    By CST Industries Inc

  • The case for water jet tank cleaning

    To maintain a consistently high level of product quality, today's processing plants must ensure that their tanks and reactors are thoroughly cleaned on a regular basis. The direct expenses involved can be substantial, and adding indirect costs {e.g., downtime and compliance with safety and environmental regulations) puts extreme pressure on tight operations budgets. To meet this challenge, more ...


    By NLB Corp.

  • Potable water tank - Brazil - Case Study

    The supply of potable water is problematic in Brazil. For months, the government in Sao Paulo admonishes to save water. Therefore are tanks required constantly to ensure the water supply in the future. We just finished the following project: 1 pc. Glass-Lined-Steel Tank ø 21,33m x 17,33m with glass-lined roof (Volume approx. 6.190m3;) Due ...


    By GLS Tanks International GmbH

  • Environmentally friendly - Tank in a box

    Bolted steel water storage tanks have been used for many years with great success and low levels of environmental impact.  Individual steel panels are precision crafted in dedicated factories, then assembled on the job site. As only a small amount of work is required in the field, local impact is very minimal.  Bolted steel storage tanks are sometimes referred to as a “Tank in a ...


    By Superior Tank Co., Inc.

  • “Tank in a Box” is a good neighbor

    As most water districts and municipalities have experienced, every new construction project generates some opposition from people living in proximity to the project. In a recent project located in Westlake Village, CA, some residents have been openly very critical of the 5,000,000 gallon concrete water storage tank under construction. One local resident stated he counted 58 concrete trucks ...


    By Superior Tank Co., Inc.

  • Two models for tank cleaning

    Fluid treatment specialist Algae- X International, Fort Myers, Fla., has expanded its Mobile Tank Cleaning (MTC) series with two new models. The MTC 500-AFR is an adjustable flow rate system for use with a wide range of tank sizes and fluid types such as diesel, biodiesel and hydraulic fluid. The MTC 1000-LX is the next generation of Algae-X’s MTC 1000 unit, now with stainlesssteel plumbing and ...


    By AXI International

  • Our Conical Cone Tanks Are Now WRAS Approved For Drinking Water Storage

    When it comes to quality, Enduramaxx is there. And our cone tanks (conical tanks) are no exception. We are proud to announce that they have just been granted WRAS certification. The Water Regulation Authority Scheme approval means that these tanks are approved for the storage of emergency water for human consumption. This means our cone bottom tanks can be used for applications for storage of ...


    By ENDURAMAXX

  • 332 Braithwaite Tanks Case Study

    Severe corrosion had caused substantial holes to develop on the Braithwaite Water Tanks. The roof was repaired utilising steel plates. The smaller holes were repaired using a combination of metal filler and GRP bandaging in conjunction with Acothane DW. A London hospital recently had a problem with two Braithwaite water tanks. Both tanks are located in a roof top plant room and had ...


    By Acothane UK Ltd

  • Underground Water Tanks: Understanding the installation process is the first step in safety inspections

    Underground storage tanks are increasingly becoming essential components of building projects, driven by rising interest in on-site rainwater and graywater collection and reuse. As a result, building officials may need to expand their expertise to include these products and their components. Some safety inspection work is obvious; for instance, checking that the installer or project owner ...


    By Xerxes Corporation

  • Maersk line - ballast tank cleaning

    Overview The following is an internal document from Maersk highlighting the use of SpillAway's NavalKleen II product for the bioremediation of No.6 heavy fuel oil that had leaked into the ballast tank of SL Atlantic. At the point that SpillAway were asked to help, the contaminated ballast water had been removed and the tank physically cleaned, however, residues left in the tank were still ...


  • Phosphate Pre-Treatment of Steel: Always Powder Coating

     Always Powder Coating have replaced the conventional iron phosphate pre-treatment system with an organic process that operates at room temperature. The savings from reduced energy, labour and waste disposal costs amount to $60,000 per annum. Background Always Powder Coating (APC) operates a powder coating facility in Melbourne's eastern suburbs and specialises in ...


  • Separation tank / Floating tank for separation of different kinds of plastic

    The NEUE HERBOLD – Separation Tank Type TB is used for separation of  plastics with various densities, primarily for film flakes, granulate from  PET bottles and other rigid types of plastics. Depending on the application, floating particles like film falkes or sinking particles like PET bottle flakes are separated from other high density plastics. The standard separation tanks ...

  • Heat Pump Used to Drain Contaminated Sludge in a Steel Factory

    Summary In 1987, new regulations required that factories dispose of their contaminated water and waste themselves. Making galvanised steel wire, the Stelfil factory produces sludge contaminated with lead and zinc. Stelfil spent thousands of dollars to bury this waste and evaluated three systems to remove most of the water: a gas dryer, an induction heated screw conveyor and a heat pump system. ...


  • 570,000 Gallon Aquastore CE Tank Helps Improve Service

    Engineering America, CST Storage Channel Partner completes installation of Aquastore® composite elevated storage tank for the Public Wholesale Water Supply District No. 4. The water district sells water to other water districts and municipalities, and is located just north of Altamont, Kansas. Ken McNickle, Manager for the water supply district said the tank that sits on top of the concrete ...


    By CST Industries Inc

  • Cone Bottom Tanks Prove Popular For Vegetable Oil Suppliers

    Enduramaxx has recently supplied 2 x 17,000 Litre Cone Tanks for storage of vegetable oil for a client based in Essex. The cone bottomed cone tanks have been manufactured in food-grade polymer. Both of the cone tanks have been constructed with steel cone bottom frames with central outlet. Many clients are looking at these cone ...


    By ENDURAMAXX

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you