strainer Articles

  • Keeping Your Control Valves in Good Health

    Whether that brand new control valve in your system is the first one you have ever had to look after or if you are an old hand at valve maintenance with tens of valves in your system, there are a few simple guidelines and reminders for keeping it operating at optimal performance. It’s important to physically check valves at least every 12 weeks or so, assuming everything is running fine in ...


    By Singer Valve Inc.

  • Don’t Let Your Control System Control You

    Regular maintenance ensures valves remain healthy. If your system is operating properly, you should physically inspect all valves at least every 12 weeks to check for tubing leaks and other abnormalities. Pressure gauges should be checked to ensure each valve is performing as designed. If you find something wrong, refer to the appropriate instruction manual, which may be available online. Because ...


    By Singer Valve Inc.

  • Healthy Control Valves

    A simple maintenance routine can help ensure trouble-free valve operation. Whether the control valve in your system is the first one that has required maintenance or if you are experienced with maintaining multiple valves in your system, some simple guidelines can help keep them operating at optimal performance. Physically checking all valves at least every 12 weeks is important, assuming that ...


    By Singer Valve Inc.

  • Top 10 Valve Considerations for Pressure Management Zones/DMA’s

    For basic pressure management or more advanced modulating pressure management, water suppliers create a network of District Metered Areas (DMA’s) or smaller, more manageable pressure management zones. The DMA or pressure zone gives the ability to measure flow and control pressure, when a Pressure Reducing Valve (PRV) ...


    By Singer Valve Inc.

  • Spray Painting Industry: Wynnum Car Renovators Panel Beating & Towing

     Background Wynnum Car Renovators Panel Beating & Towing (WCR) is a medium sized spray painting and panel beating workshop which employs eight staff. Over the years, Peter Watson (Manager of WCR) has been continuously thinking of ways to improve his business productivity, reduce operating costs, and help protect the environment. He has to date introduced a number of waste ...


  • Pump Performance Checklist

    Keeping your pump in shape will help reduce costs and boost profits! Cut fuel consumption, reduce replacement parts costs and minimize pumping time on every job! A PUMP THAT LETS YOU DOWN when you need it most causes obvious losses of time and money. Not so obvious, but every bit as costly, are losses you can incur with pumps that operate at less-than-peak efficiency. A pump ...


    By Gorman-Rupp Co.

  • Preventing Rust Formation with Electronic Water Treatment

    The growing demand for water for industrial applications, power production and water supply has resulted in an increasing need for water treatment. The water used in industry comes from a range of sources such as rivers, lakes, wells and oceans and contains dissolved and suspended solids.  In addition the industrial world has to reuse water which in turn causes it to be highly concentrated ...

  • Wastewater engineers go with the flow

    The efficiency of maintenance work has been improved by water treatment engineers employing Intellisonde monitors in their final effluent. Designed primarily to measure water quality, the Intellisondes also measure flow, and this reading is being used to detect the accumulation of debris that necessitates a maintenance visit. Wastewater treatment efficiency is often measured by the analysis of ...


    By Intellitect Water Ltd

  • Pump Maintenance Know-How

    It’s no secret that a pump that runs at peak efficiency uses less fuel, experiences less downtime and costs less to operate. The time you spend maintaining your pump is actually an investment in its lifetime performance and value. In fact, there are many ways that a diligently maintained pump can reduce your costs, while increasing efficiency. For instance, by ensuring your pump investment ...


    By Gorman-Rupp Co.

  • Megawatt out of chips

    König + Neurath AG, one of the leading European office furniture manufacturers, in Karben near Frankfurt/Main besides other materials process derived timber products such as chipboards and multiplex boards to produce office furniture for nearly any furnishing purpose. The resulting wood residues are not discharged but processed to become combustible by means of which the complete heating and ...


  • Magnetic filtration used in a candy manufacturing plant

    Candy ManufacturerPt. Mayora Indah Tbk.IndonesiaPROBLEM: High levels of finished product being rejected due to ferrous contamination.SOLUTION: Beny Hermawan of PT. Sinarmentari Indoprima the Indonesia distributor for OEI installed an OEI magnetic filter rod (3RNC5812) in an existing T-Strainer on the finished product line (photo A).RESULTS: Photo B: contamination captured 44 grams ...


  • Top 8 things to check when maintaining a Pressure Reducing Valve

    Like every other piece of mechanical equipment we use, a control valve does require some maintenance. As budgets are stretched and time is tight, it can be tempting to ignore checking on valves that are often located in underground vaults and give years of operation without complaint, but eventually like everything else, they will fail. This article looks at 8 simple steps that if undertaken ...


    By Singer Valve Inc.

  • Tar and Pitch

    Tar and Pitch Pumping liquid tar and pitch with zero leakage and reduced maintenance The pumps used have to be heated and have wear resistant bearings. Tar is often transported in ships. The pumps on board bring the tar to the storage tank from which it is pumped to the distillation towers where it is fragmented. During the process about half the tar ends up as ...


    By DESMI A/S

  • Filters Take the Strain

    The sheer range of applications for filtration equipment in the food, beer and beverage filling industries is staggering. Every filling-processing operation has at least two filtration units installed and there has been a general move towards the use of more efficient systems, both for improving product integrity and to meet increasingly sensitive environmental considerations with regard to ...

  • Membrane Bioreactor for Sanitary Landfill

    The Problem The county of Warren NJ owns and operates a sanitary landfill in Oxford Twp, NJ. The facility generates an average of 50,000 gallons per day of leachate, with peaks to 100,000 gallons per day. The facility was discharging to a local POTW from their lagoon, but they were facing requirements for nitrogen removal from the POTW and needed a new system to provide ...


    By Dynatec Systems Inc.

  • atg UV provide solution to chemical balance in swimming pool applications

    Client: Gloucester Institute of Technology   Location: Gloucester, USA Service: Swimming Pool UV Disinfection Description: atg UV provide solution to poor water quality due to high levels of chloramines. The Gloucester Institute of Technology has chosen a state-of-the-art atg UV Technology Ultraviolet water ...


    By atg UV Technology

  • American Industrial helps Knife River construction with Cornell Technology

    American Industrial of Livermore California emphasizes first-class customer service, in acquiring and retaining pump system customers.  For the last 8 years, they have brought that customer service focus to their relationship with Knife River Construction. Knife River, operating an aggregate sand/gravel plant in Marysville California, is the ninth largest aggregate producer and the sixth ...


    By Cornell Pump Company

  • Phosphorus control protects surface waters

    Phosphorus is the decisive factor for excessive algae and plant growth in water bodies, that’s why quality standards require reductions in the amount of phosphorus released from wastewater treatment plants into rivers and lakes. In recent years, the outlet limit values have not only been reduced on national levels. Depending on the vulnerability of ecosystems, especially low target values ...


    By Endress Hauser

  • Nitrogen and Nitrous Oxide – the differences you need to know

    We’ve previously posted blogs about the confusion between carbon dioxide (CO2) and carbon monoxide (CO) as these gases are regularly mixed up. However, ...


    By Analox Sensor Technology

  • Top 5 Causes for AODD Pump Failure

    1.       Air Valve Stalling, Clogging or Leaking: Stalling of the air valve often has to do with the design of the airways inside the valve. If the design in less than optimal it will stall under certain conditions. Same can be said about leakage of air where the air mostly blows through the valve instead of being redirected to push the diaphragm. Clogging on the other hand ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you