sulfide sensor Articles

  • Developing Technologies to Detect Hydrogen Sulfide (H2S) Gas

    Abstract Hydrogen sulfi de (H2S) gas can cause nausea, headaches, unconsciousness, and death. Industries struggle to detect this deadly substance before it harms workers or communities. Safety system manufacturers have developed detectors that sense the H2S quickly and accurately. This paper illustrates, in general terms, considerations in effective placement of H2S detectors: ...

  • SCORe-CT: a new method for testing effectiveness of sulfide-control chemicals used in sewer systems

    A new method for testing the effectiveness of chemical products for sulfide control in sewers is reported. The method, called SCORe-CT (Sewer Corrosion and Odour Research – Chemical Testing), consists of two specially designed laboratory-scale systems that mimic sulfide production in real rising main sewers, and a multi-phase and multi-facet testing protocol. The monitoring tools/methods include ...


    By IWA Publishing

  • A sewer process model as planning and management tool – hydrogen sulfide simulation at catchment scale

    The collection system of a major city at the Persian Gulf was simulated for bulk water hydrogen sulfide and the release of sewer gas to the urban atmosphere. Geometry data on 870 km of sanitary sewer and data on dry weather flow entering all nodes in the catchment was exported from a Mike Urban database and imported to the sewer process model WATS. The process model then routed sewage and sewer ...


    By IWA Publishing

  • Electrochemical Sensors for Specific Gas PPM Monitoring

    Echem sensors are able to read a specific gas even when it is mixed in a background of other gases. Echem sensors are typically used to read very low PPM concentrations of toxic gases. The Echem sensor consists of a small cell holding an electrolytic solution. This solution needs a specific gas in order to produce an electrical signal. When the specific gas passes through a permeable membrane and ...

  • Lake Josephine Community, Florida - Case Study

    In January 2010, AdEdge Water Technologies, LLC was contacted by Aqua Utilities Florida to provide a hydrogen sulfide removal system for the Lake Josephine Community located in Highlands County, Florida. The existing water system consisted of two wells feeding into a centralized distribution system with a maximum capacity of 230 gpm being consumed by a population of 1,250 persons. The raw water ...

  • Continuous emission monitoring and control of packed tower odor control systems using the sycamore CEM

    ABSTRACT Packed-tower chemical scrubbers, with sodium hydroxide (caustic) and sodium hypochlorite (bleach), are commonly used to treat foul air from wastewater treatment processes. The available control mechanisms include a pH probe and controller for the sodium hydroxide feed, an oxidation reduction potential (ORP) probe with a controller toestablish the bleach feed, and proprietary ...

  • Stop metal losses in processes with Sulphide, Cyanide, Ammonia and Pressure Fluctuations

    Abstract Losses of metal are often traced to incorrect pH/ORP signals in floatation, leaching, extraction, electrolysis, and precipitation processes, aggravated by pressure changes. IC Controls a Canadian mining sensor manufacturer developed a new superior pH/ORP sensor that stops metal losses, reduces environmental footprint and contributes to sustainability. The cause of incorrect pH/ORP ...


    By IC Controls Ltd.

  • Follow toxic gas standards for a smoother project

    Toxic gases, such as Hydrogen Sulfide and Sulfur Dioxide, can injure and kill quickly. Therefore, mitigation of these hazards must be fast and sure. The United States Occupational Safety and Health Administration (OSHA) and other authorities take detection of these gases very seriously. The American National Standards Institute/ American Petroleum Institute (ANSI/API) and ISA industry standards ...

  • Model 5100 Verification/Validation case study

    Background Many sensors used in gas analyzer systems come into direct contact with the process gas, and there is the potential for degradation over time especially with streams that contain contaminants like glycol, moderate to high levels of hydrogen sulfide etc. With sensor degradation, the analyzer response characteristics change resulting in inaccurate readings. In order to ...

  • Process analytics support higher yields in biogas plants – Case Study

    The production of biogas by means of the anaerobic, microbial breakdown of organic substances in “biogas plants” is growing in significance, especially against a background of increasingly scarce and expensive fossil fuels. The key energy-generating element is methane. Depending on the baseline conditions, biogas also contains small quantities of water vapor, hydrogen sulfide (H2S), ...

  • Process analytics in claus plants – Case Study

    Sulfur recovery The relatively high sulfur content of the still available crude oil and natural gas reserves and the more stringent standards for sulfur emissions from oil, gas, and chemical processing facilities demand reliable and cost effective technologies for sulfur recovery. Sulfur recovery refers to the conversion of hydrogen sulfide (H2S) as byproduct of natural gas plants and ...

  • Wastewater force main management – internal corrosion survey using inline methods

    In our first post about Wastewater Force Main Management, we looked at how preliminary analysis helps operators develop a plan for managing their system. After completing this process, operators can begin putting the plan into action with preliminary surveys on specific force mains. For those at WEFTEC, you can visit Pure ...


    By Pure Technologies

  • Choosing the Right H2S Analyzer for Your Specific Application

    Not all H2S analyzers are created equal, and certain H2S analyzers work better on different applications than they do others. Significant amounts of time, money and headaches can be saved by learning about the different H2S analyzer principles of operation and choosing the correct analyzer for your ...


    By Analytical Systems Keco

  • Grapheme for the Advancement of Biotelemetry

    Graphene is evidently flourishing in the nanotechnology industry, and it is now taking its steps towards its potency in medical application. Recently, a research team at Pacific Northwest National Laboratory (PNNL) has just developed the world’s smallest battery.  Building a battery with a size of just that of a grain of rice is really a big deal, something that could get a major break ...


  • City of Roswell, Georgia - Case Study

    In late 2011, the United States Army Corps of Engineers (USACE) approved plans to install a new well and build a new water treatment facility for the City of Roswell, Georgia. Barlovento LLC was selected during a competitive bidding process to provide an iron and manganese removal system for the new water supply. AdEdge Water Technologies, LLC was contracted to design, manufacture, and commission ...

  • Wastewater Force Main Management – Internal Corrosion Survey using inline methods

    In our first post about Wastewater Force Main Management, we looked at how preliminary analysis helps operators develop a plan for managing their system. After completing this process, operators can begin putting the plan into action with preliminary surveys on specific force mains. For those at WEFTEC, you can visit Pure ...


    By Pure Technologies

  • Fixed Versus Portable Gas Detection – Which Is Better?

    Did you know that workers are needlessly injured every year as a result of leaking toxic or combustible substances? Such incidents are known to involve a wide range of hazardous gases (including ammonia, carbon monoxide, chlorine, hydrogen sulfide, hydrocarbon vapors and so on). The sad reality is that most of these accidents are avoidable if only the workplace is adequately monitored. This leads ...

  • Monitoring Gas Emissions from Volcanoes to Predict Volcanic Activity

    To understand and predict the behaviour of volcanoes an increasing number of scientists are combining geological monitoring and geochemical models. By measuring and monitoring the prevalence of gases like CO2, scientists hope to be able to better predict the likelihood of volcanic eruptions. In 2010 Iceland’s Eyjafjallajökull volcano erupted, releasing 250 million ...


    By Edinburgh Instruments Ltd

  • Not All Hazards are the Same: Design considerations for matching flame and gas hazards to detector technologies

    Not all flame and gas hazards in facilities are the same, therefore the detection technology chosen should be specific to the type of hazard to be detected. How do users select technologies to see certain fires or detect certain gases? The intent of this paper is to give a broad introduction to the selection and use of flame and gas detector technologies. We will answer questions such as these: ...

  • Reducing Ruptured Reputations – Assessment Tools Reduce Risk of Failure on Sewer Force Mains

    A ruptured sewer pipe can attract a lot of unwanted attention, even when it happens on private property. Last year, hours before celebrities were to arrive at the Golden Globes Awards show at the Beverley Hills Hotel, a reputed sewer pipe burst, spewing a mess of wastewater on the red ...


    By Pure Technologies

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you