sulfur dioxide analyser Articles

  • EPA establishes new 1-hour standard for sulfur dioxide

    On June 2, 2010, the U.S. EPA established a new 1-hour primary National Ambient Air Quality Standard (NAAQS) for sulfur dioxide (SO2). The new 1-hour standard was set at the level of 75 parts per billion (ppb) calculated as the three-year average of the 99th percentile of the annual distribution of daily maximum 1-hour average concentrations. With the establishment of the new 1-hour SO2 standard, ...


    By Trinity Consultants

  • New Nitrogen Dioxide Ambient Air Quality Standard Could Pose Challenges

    In the more than 200 air quality modeling analyses that ALL4 meteorologists have conducted, demonstrating compliance with the annual nitrogen dioxide (NO2) National Ambient Air Quality Standard (NAAQS) of 53 parts per billion (ppbv) has rarely been an issue.  The relative ease for demonstrating compliance with the annual NO2 NAAQS is due to two (2) factors.  First, the ...


    By All4 Inc.

  • Class I area impact analyses – recent guidance and updates

    As recommended in Appendix W of 40 Code of Federal Regulations (40 CFR) Part 51 (Guideline on Air Quality Models), the CALPUFF modeling system has been widely used for long-range transport dispersion modeling analyses, especially for applications related to Class I Area analyses (e.g., regional haze evaluation and Class I Prevention of Significant Deterioration (PSD) increment analysis). As U.S. ...


    By Trinity Consultants

  • Analysis of Natural Gas Products by GC / TCD / FID

    The complex mixture of condensible hydrocarbons and permanent gases in a natural gas product has historically been separated on gas chromatographs equipped with dual columns and a switching valve. The light gases are separated from heavier compounds on a molecular sieve column, which is then backflushed onto a suitable column to separating the rest of the mixture. The Buck Scientific Model 910 ...


    By Buck Scientific Inc

  • Monitoring pollution in remote regions of Africa case study

    Customer: The South African Weather Service (SAWS) Ecotech’s Distributor: SI Analytics (Pty) Ltd Application: Ambient Air Monitoring in Karoo and Waterberg regions of South Africa Background: Carbon Monoxide and Sulfur Dioxide are among the major pollutants found in cities around the ...


    By Ecotech Pty Ltd

  • Replacement of hazardous chromium impregnating agent from silver/copper/chromium-impregnated active carbon

    Activated carbon (AC) is widely used as an effective adsorbent in many applications, including industrial-scale air purification systems and air filter systems in gas masks. In general, ACs without chemical impregnation are good adsorbents of organic vapors but poor adsorbents of lowmolecular-weight or polar gases such as chlorine, sulfur dioxide (SO2), formaldehyde, and ammonia (NH3). ...

  • New Flag guidance for class I area modeling

    In October 2010, final guidance was issued for assessing the impacts of new and modified sources of air pollution on Air Quality Related Values (AQRV) in Class I areas, consisting of visibility (including plume impairment and regional haze), ozone effects, and nitrogen and sulfur deposition. This guidance, which was issued in draft form on July 8, 2008, makes technical revisions to the previous ...


    By Trinity Consultants

  • 530-Megawatt Supercritical Pulverized Coal-Fired Power Plant

    Using the most advanced clean coal technology, B&V Energy designs a supercritical pulverized coal-fired unit to be one of the country's cleanest producers of affordable electricity. Wisconsin Public Service Corporation (WPSC) is a regulated electric and natural gas utility serving more than 700,000 customers within Wisconsin and Michigan. Dairyland Power Cooperative (Dairyland) provides the ...


    By Black & Veatch Corporation

  • Advanced gas analysis - on the go

    The field of ambient air analysis - monitoring industrial and other environments for harmful concentrations of gases - has traditionally faced a technology limitations: Would you prefer a complete and reliable tool, which will be bulky, complicated and inconvenient? Or would you like a nice portable one that's simple and lightweight, but unreliable and limited in its capability? Truly complete ...


    By HHCS Handheld USA Inc.

  • Navigating NSPS subpart Db for boilers: a case study

    Over the past year, Trinity assisted a chemical company with the permitting and installation of a new 220 MMBtu/hr package boiler. The new natural gas-fired boiler replaces coal-fired units that were installed in the 1940s. Navigating through the numerous, and at times conflicting, regulatory requirements applicable to such a unit has been challenging. With careful planning and implementation, ...


    By Trinity Consultants

  • Composting - Best bang for MSW management buck

    For many years, life cycle analyses of end-of-life management practices have been available for all of the basic recyclables as well as organics. The life cycle data, usually derived by the US Environmental Protection Agency's Waste Reduction Model (WARM), represents the net greenhouse gas impact of recycling, landfilling or incinerating a variety of material streams. The model calculates ...


    By BioCycle Magazine

  • Urban Air Quality Forum to Focus on Environmental Impacts of Fuel Choices in Developing Countries

    When chemist Miriam Lev-On, Ph.D., recently visited Agra, India, she toured the region and viewed the grandeur of the Taj Mahal—the 17th Century mausoleum that is one of the world's most celebrated monuments. But as memorable as the Taj Mahal ...


  • Addressing New Source Permitting and Visibility Issues

    Within the past decade-- and especially in the past year-- several important developments have occurred, which affect new or proposed emission sources in virtually every region of the country. These developments include the availability of new, more accurate techniques for assessing air quality impacts, significant increases in the areas subject to assessments of pollutant impacts on Class I, ...


    By AECOM

  • GHG Reporting Rule

    G 6.1 | Requirements and Developments in Environmental and Carbon Reporting and Disclosure John Fillo | Senior Engineer, Sentech, ...

  • New Source Permitting and Visibility: Strategies for Developers of New Emissions Sources

    Several recent developments have occurred which affect thousands of new or proposed emission sources in virtually every region of the country. These developments include the availability of new, more accurate techniques for assessing air quality impacts, and the increasing influence of Federal Land Managers (FLMs). Proposed facilities that are major emissions sources subject to Prevention of ...


    By AECOM

  • Monitoring Environmental Quality

    ' In order to determine the effectiveness of actions to improve environmental quality it is necessary to be able to measure relevant environmental parameters at a level of detail which is accurate enough to distinguish the anticipated changes. However, the establishment and maintenance of monitoring systems is time-consuming and expensive and therefore the scale of such systems needs to be kept ...


    By The World Bank

  • The Economic Toll of Pollution’s Effects on Health

    Measuring and valuing the health impacts of pollution are very complex and available methods of economic analysis are often rudimentary. In recent years, considerable progress has been made, especially in respect to air pollution. This note summarizes the latest findings and outlines some basic approaches that can be applied in the economic analysis of Bank projects and sector studies. However, a ...


  • Designing and Implementing Perimeter Air Monitoring Programs

    Perimeter or fenceline ambient air quality and meteorological monitoring programs have become increasingly valuable at hazardous waste, landfill, dredging, ports, and MGP remediation sites. Air quality monitoring programs protect public health and reduce owner liability ...


    By AECOM

  • States propose attainment designations for the new 1-hour So2 NAAQS

    The U.S. EPA revised the primary National Ambient Air Quality Standard (NAAQS) for sulfur dioxide (SO2) on June 2, 2010 by implementing a new 1-hour standard of 75 parts per billion (ppb) (calculated as the three-year average of the 99th percentile of the annual distribution of daily maximum 1-hour average concentrations). Based on an evaluation of the risks posed by acute exposure to SO2, EPA ...


    By Trinity Consultants

  • 2015 North American Water Treatment New Product Innovation Award

    Background and Company Performance Industry Challenges Tertiary and advanced wastewater treatment (WWT) is one of three stages in the cleaning of wastewater generated by the municipal and industrial sectors. Building on and improving upon the results of treatment through initial primary and secondary WWT stages alone, tertiary treatment is performed prior to waste ...


    By Frost & Sullivan

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you