sump pump controller Articles

  • Crisafulli submersible pumps and power units-case study

    In June, 1997, Mr. Quinn of EPCO, the customer's designated agent, inspected the systems at Crisafulli's manufacturing plant, and these made in Montana pumping systems were tested and shipped to Siberia. SRS Crisafulli, Inc., founded in 1966, is one of a few select manufacturers of specialized, engineered pumping and dredging systems in the United States. From its beginning, SRS Crisafulli has ...


    By SRS Crisafulli, Inc.

  • Pumping Up Safety, Efficiency and A Smarter Design

    The Opportunity The Progress Energy’s Lee Plant, located in Goldsboro, N.C., originally enlisted nine vertical sump pumps within the plant as yard drain pumps – pumps that have motors that are located above the pump and a line shaft that extends down into the length of the sump – whereas the pump is actually at the bottom of the sump. The pumps were enlisted to remove ...


    By Gorman-Rupp Co.

  • Fluid control saves $1 million at automotive supplier

    The Problem: A Michigan wheel manufacturer was facing numerous problems associated with the quality and maintenance of their coolant and cleaners. These problems included downtime quality control rejections due to corrosion of parts, pumps clogging with biological matter, and operator complaints of coolant odors. Concurrently, the plant needed to reduce fluid-related costs and improve data ...

  • Acid Eddy, Chemical Dilution Trough

    What are the benefits of diluting acids (chemicals) with water before it is allowed to enter the basin in cooling towers?   *Reduces chemical damage to cooling tower basin *Protects cooling tower sump pumps *Reduces downtime of tower for basin repair *Simple design greatly improves reliability *More precise chemical control *Lowers chemical costs by controlling ...


    By Global Treat, Inc

  • TurboScrubber® & TurboStripper® ‘TURBOCC’ Technology, for Flue Gas Cleaning & Carbon Capture System for Enhanced Plant Growth

    The plant would be supplied in a number of preassembled skid mounted packages for installation and connection on site. Typically these packages would comprise:  TurboScrubber®, water sump, recirculation pumps (run & standby), local water circulation pipework, forced or induced draft flue gas fan and local flue gas ductwork.  TurboStripper®, water sump, recirculation ...

  • Pratt & Whitney adds 26 Hyde TOS to Middletown facility

    Challenge Aircraft engine manufacturer uses non-standard sump sizes which makes it difficult to change out coolant from the sumps and reduce odors and bacteria. Customer Pratt & Whitney Industry Aerospace Products Tramp Oil Separators Automatic Air Sparger Business ...


    By PRAB, Inc

  • A guide to successful installations

    A successful Pumps & Controls installation begins with sound project design, well executed installation, and a thorough start-up procedure. EPG includes an Installation Guide, Installation Record Form, and Start-Up Checklist  in every O&M to help achieve this. Not only are these documents a useful resource during the design stage, they can be used as part of a "flight check" process ...


    By EPG Companies Inc.

  • Oil Smart® Spill Prevention Technology

    See Water, Inc. is a manufacturing firm that is located in San Jacinto, CA. SEE Water, Inc. designs and manufacturers water pump controls, high liquid alarms, and pump control panels, with a primary focus on the design of Oil Smart® Technology.Oil Smart Technology has the unique ability to differentiate between oil and water; the technology will automatically pump water without the risk of ...


    By See Water, Inc.

  • LTM-2 Probes Provide Consistent Sump Level Measurement Resulting in Better Cyclone Performance

    Mill’s have shown a significant interest in using LTM-2 probes for measuring secondary mill sump pulp levels due to their accuracy, fast response and not being affected by froth-foam or subject to erroneous signal bouncebacks. In fact over the last year the bulk of Zeroday’s probe sales have been in ferrous and base metal mill pebble and ball milling sump applications. Uniformly the ...


    By Zeroday Enterprises, LLC

  • Power plants use oil skimmers to prevent contamination from spills

    Most hydroelectric plants designed in the 1960s were built with a station drainage sump that collects all drainage from the plant. As designed, float switches activate sump pumps that discharge liquids directly into the tailrace. The system cannot distinguish between types of liquids, so in the event of an oil leak, oil in the sump could be released into the tailrace. Modern ...


    By Oil Skimmers, Inc.

  • EPG Systems At Work

    In Mississippi, a landfill had seven leachate sumps, serving forty acres. A sideslope riser design was being utilized with a variety of pumps and control systems spread over a large footprint requiring thousands of feet of conduit and wire. Over time, as pumps failed, a variety of types and brands of pumps were used including water well-type submersibles and grinder pumps. Electrical control ...


    By EPG Companies Inc.

  • Machine shop for oil and gas services provider wins when the chips are down

    Chip Filtering Keeps Machine Shop Coolant Clean Since 1976, Facility Engineer Jay Wilson has handled the HVAC, electrical, and other operational facility needs for a key Texas-based plant within the FMC Technologies, Inc. (FMCTI) family. This leading global provider of technology solutions for the energy industry and other industrial markets was twice named as the Most Admired Oil and Gas ...


    By Abanaki Corporation

  • Desubmerge Your Submersible Pump

    A few decades ago, well, definitely not more than four, a contractor was introduced to electric powered submersible pumps. The crew’s first reaction was, “What! You’re going to throw that electric motor in the water? You’ve got to be crazy!” After a few weeks of getting comfortable with the subs, the whole crew was handling them like ...

  • Dover Docks

    Dover is the UK's premier port. Pulsar have helped them with a wide range of tank volume and pump control applications. The versatility of Pulsar’s non contact ultrasonic range has been demonstrated with a range of applications at Dover Docks. Applications have included both storage tank contents gauging for inventory management in critical fuel applications and sophisticated pump control ...

  • Coolant & waste management in America`s heartland

    Challenge Hydraulic pump manufacturer needs a filtration system to help reduce coolant costs, combat foul odors and dermatitis caused from various coolants used in machining cells. Customer Iowa Industrial Hydraulics Industry Agricultural Products Guardian Coolant Recycling System ...


    By PRAB, Inc

  • A first person account of mine longwall dewatering solutions

    When mining companies in Alabama have problems, they look to Jim House & Associates (JH&A) for solutions. Such was the case when a large mining company needed to keep water off of the longwall face underground and they looked toward Jim House & Associates to provide them with a solution. JH&A has been in business since 1957 and is a premier ...


    By Cornell Pump Company

  • Pump Maintenance Know-How

    It’s no secret that a pump that runs at peak efficiency uses less fuel, experiences less downtime and costs less to operate. The time you spend maintaining your pump is actually an investment in its lifetime performance and value. In fact, there are many ways that a diligently maintained pump can reduce your costs, while increasing efficiency. For instance, by ensuring your pump investment ...


    By Gorman-Rupp Co.

  • Instek LTM Probes provide faster response times and superior pulp level monitoring

    Do you need reliable signals with accurate pulp level detection, low maintenance costs AND simultaneously increase your recoveries? Instek Control LTM products provide superior pulp-level interface monitoring through the benefits of conductance technology and advanced digital signal processing logic. Ideal for monitoring froth or foam covered process cells, tanks and sumps, the LTM probe ...


    By Zeroday Enterprises, LLC

  • CHRIS Kids case study

    The distinctive red cedar clad tank of the CHRIS Kids’ rainwater harvesting system is a visual reminder of their commitment to sustainability. Project: CHRIS Kids Location: Atlanta, GA Application: Landscape Irrigation System(s): 19,400 Gallon Eastern Red Cedar Tank with RMH-30 Rainset™ The CHRIS Kids ...

  • Iowa Industrial Hydraulics reduces coolant waste by 90% with installation of a PRAB Guardian 400 case study

    Challenge Concerned with various problems associated with water soluble coolants, including rising costs and foul sump odors, Iowa Industrial Hydraulics developed a coolant management system featuring PRAB’s Guardian 400 to recycle spent coolant and reduce fluid purchase costs by 60%. During the late 1980’s, Iowa Industrial Hydraulics, like many other manufacturers, ...


    By PRAB, Inc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you