surface water quality measurement device Articles

  • Phosphorus control protects surface waters

    Phosphorus is the decisive factor for excessive algae and plant growth in water bodies, that’s why quality standards require reductions in the amount of phosphorus released from wastewater treatment plants into rivers and lakes. In recent years, the outlet limit values have not only been reduced on national levels. Depending on the vulnerability of ecosystems, especially low target values ...


    By Endress Hauser AG

  • Antifouling System Reduces Algal and Biological Growth on the In-Situ TROLL 9500 Water Quality Instrument

    Abstract New regulations regarding clean water have increased the need for long-term environmental monitoring. As water quality sensor technology improves and becomes more stable, the limiting factor in these projects becomes biological and non-biological fouling of instrumentation. Biofouling of environmental equipment increases site visits and maintenance, which elevate monitoring costs. ...


    By In-Situ, Inc.

  • Water Sustainability

    I7.1  | Water Optimization – 30% Groundwater Use Reduction Tabatha Pellerin, Senior Program Manager, AECOM AECOM assisted the Entergy Lewis Creek gas/coal fired electric power plant with water conservation efforts prompted by a goal of 30% ...

  • Quantifying Sub-Surface Discharges from Individual Sewer Defects

    ABSTRACTThe California Regional Water Quality Control Board, Santa Ana Region (RWQCB) required wastewater collection agencies in Orange County to report discharges from “pipe breaks, leaking sewer pipes and joints, and other subsurface discharges of wastewater.” The Orange County Sanitation District (OCSD), in conjunction with a research team from University of California, Irvine (UCI), developed ...

  • CO2 Reduction by Cooling Tower Retrofit Measures

    Abstract : In the course of a cooling tower retrofit a cold-end-optimisation should be done. Due to installing best available technology of cooling fills a decrease of cooling water temperature and additional power output can be generated. The following consideration shows options of improvement and takes a look at the economic importance. Introduction: Increase in efficiency of ...

  • On-line monitoring of enzymatic activities in water and water resources

    On-site detection of enzymatic activities has been suggested as a rapid surrogate for microbiological pollution monitoring of water resources (e.g. using glucuronidases, galactosidases, esterases). Due to the possible short measuring intervals enzymatic methods have high potential as near-real time water quality monitoring tools. This presentation describes the successful realization and ...

  • Have your groundwater measurement data available!

    OTT Hydromet has developed an integrated groundwater monitoring and data management solution. The combi-package includes the OTT ecoLog 500, a device for the collection and remote transmission of groundwater data and the Hydromet ...


    By OTT HydroMet

  • A marked improvement in the reliability of the measurement of trace moisture in gases

    Introduction Water is an important substance without which mankind cannot survive. However, it also causes problems such as residual impurity in scientific experiments and in manufacturing processes where a high-vacuum condition or a high-purity gas is required. This is because water is present in the atmosphere in large quantities and therefore can intrude readily everywhere, and can adsorb ...

  • Queensland: a water sensitive future

    South East Queensland (SEQ) is planning a water sensitive future for the region and its cities. In order to the transition to be successful, it is necessary to develop an implementation plan. This plan aims is to identify a common vision that focuses on the transition pathway and mechanisms the region needs, to become a water ...


    By Geoplast US Corp.

  • Sample Handling Strategies for Accurate Lead-In-Soil Measurements in the Field and Laboratory

    ABSTRACT The inhomogenous lead-in-soil matrix can present serious obstacles to accurate sample collection and handling. In typical lead-in-soil measurement, particle size related errors in sampling and sample handling often exceed all other sources of error. The magnitude of error can vary widely depending on the particulate nature of the lead contaminant and the effectiveness of control ...

  • Unique technology for monitoring piped water

    INTELLITECT WATER has launched a unique, highly innovative drinking water monitoring technology that will revolutionise the delivery of drinking water. The new technology monitors the quality of water in pipeline distribution networks and for the first time provides reliable data to protect the integrity of the water quality, to enhance customer satisfaction and to improve operational efficiency. ...


    By Intellitect Water Ltd

  • Sample System Best Practices for Water and Hydrocarbon DP Applications

    Abstract Sampling techniques for BTU and moisture measurements are well understood but applications beyond the routine requires additional attention to detail. Two such applications are the subject of this paper. The first is the measurement of low level moisture (1 – 1,000 ppbv) for cryogenic processes. Measuring moisture below 1 ppm is an entirely different world from the traditional ...

  • ASTM Standards Help Meet Need for Clean Water

    The new ASTM Water Portal provides a single access point to standards and related information about ASTM International’s diverse committees working to protect and monitor this vital global resource. Clean and safe water is the underpinning of the quality of life for people around the world. Global economies depend on water, whether it’s to support the manufacturing of goods ...


    By ASTM International

  • Low-Flow (Minimal Drawdown) Ground-Water Sampling Procedures

    Untitled Document Background The Regional Superfund Ground Water Forum is a group of ground-water ...


    By Solinst Canada Ltd.

  • Crossflow Membrane Filtration High-Purity Water Systems

    INTRODUCTION As the electronics industry continues to provide us with such products as high resolution television, notebook size portable computers and cars with automatic navigation systems, it becomes necessary to produce semiconductors with finer device geometries to allow for efficient placement of more circuits per a given area. This requires increased control of a semiconductor's material ...

  • Map algal blooms with satellite remote sensing technology

    The quality of water bodies is a key determinant in the usability of the resource for the purpose required. It is therefore of great importance to managers of hydrologic resources to be able to confidently tell the status of their water resource. One of the major problems in the quality of surface water bodies is the blooming of algae and blue green algae. Algal blooms can result in ecological, ...


    By LG Sonic

  • Map Algal Blooms with Satellite Remote Sensing Technology

    The quality of water bodies is a key determinant in the usability of the resource for the purpose required. It is therefore of great importance to managers of hydrologic resources to be able to confidently tell the status of their water resource. One of the major problems in the quality of surface water bodies is the blooming of algae and blue green algae. Algal blooms can result in ecological, ...


    By LG Sonic

  • Work when others sleep – service on the runway

    When asking our quality manager Hartmut Schneider, which kind of projects are the most spectacular ones in his opinion, he’d answer: airport projects. In the following he reports on the general challenges during runway sensor acceptance tests… On large international airports, it can take several years until an installation and acceptance of embedded road sensors such as the ...

  • Work when others sleep – service on the runway

    When asking our quality manager Hartmut Schneider, which kind of projects are the most spectacular ones in his opinion, he’d answer: airport projects. In the following he reports on the general challenges during runway sensor acceptance tests… On large international airports, it can take several years until an installation and acceptance of embedded road sensors such as the ...

  • Controlling food additives level in a process tank case study

    SmartScan50 provides real time level measurement results of food additives during production for a major chemical supplier. The customer is a prominent supplier of ingredients and fine chemicals for the food, cosmetic, detergent, and pharmaceutical industries, and also specializing in the manufacture and development of Citric Acid, Citrates and Phosphates. The company invests greatly in its ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you