suspended solids monitoring sensor Articles

  • Using the TurbiTechw² LA and HR Sensors to Measure Suspended Solids

    Continual, accurate Suspended Solids measurement is crucial for monitoring the performance of your aeration and treatment systems, and reacting to changes in water quality and processes quickly. We strive to make our customers’ lives easier, and their systems as efficient as possible, which is why we focus on accuracy and reliability in our two most popular Suspended Solids ...


    By Partech (Electronics) Ltd.

  • How & Why We Measure Suspended Solids

    In case you weren’t sure, Suspended Solids is simply a density measurement used to describe exactly how much waste sludge and particles are in the water, and is measured in milligrams per litre (mg/l), grams per litre (g/l) or percentage solid (%). 1000mg/l = 1g/l = 0.1%. It is used to calculate the amount of material, or load, in a wastewater or industrial system. Suspended Solids ...


    By Partech (Electronics) Ltd.

  • Case Study: Liz Bagshaw on the IRC sensors

    Our infrared IR’C sensors have been making waves in the world of glacial meltwater monitoring. Glacial environments are key indicators of global warming and climate change. They’re also home to a diverse range of microorganisms. Both of these need to be quantified and monitored, but doing this isn’t easy because of the cold, remote environments in which they are found. To combat ...


    By Partech (Electronics) Ltd.

  • Partech Water Instruments Case Study: China’s Success with Partech’s Clever Sensors!

    Ronghuai Water Group uses Partech water instruments in 20 of their water plants across China! Currently, the Watertechw2 pH8000 and TurbiTechw2 LA sensors are used in the plants. The ...


    By Partech (Electronics) Ltd.

  • Partech’s Watertechw2 pH8000 and Turbitechw2 sensors work wonders in China - Case Study

    Built in Britain, recognised worldwide. The most recent Partech plaudits come from Ronghuai water group (Zhejiang province) who are currently using the Watertechw2 pH8000 and Turbitechw2 LA sensors in approximately 20 water plants ...


    By Partech (Electronics) Ltd.

  • Final effluent monitors protect wastewater treatment efficiency

    Southern Water operates 370 wastewater treatment plants (WWTP), many of which are unmanned for most of the time and most have numeric environmental permits, so a network of online monitors has been established to improve treatment and protect discharge compliance. This has involved the installation of final effluent monitors at over 300 sites in a programme that has lasted for more than ten ...


  • Reliable silica monitoring supports power station efficiency

    West Burton B CCGT is a Combined Cycle Gas Turbine power station near Nottingham in the UK. It has three open-cycle gas turbines capable of generating enough electricity for approximately 1.5 million UK homes. In common with all combustion based power stations, the CCGT has a requirement to monitor silica levels in the Plant’s water and steam processes. Sean Todd, the Plant’s Control ...

  • Reduced order model monitoring and control of a membrane bioreactor system via delayed measurements

    Activated sludge treatment is one of the most widely used processes for wastewater treatment (WWT). These systems are built with sufficient design margin to allow changes in loading and process conditions. This is necessary and prudent to overcome limitations in measurement, monitoring and controlling of WWT process parameters at the desired frequency. Online sensors for mixed liquor suspended ...


    By IWA Publishing

  • Monitoring the variations of the oxygen transfer rate in a full scale membrane bioreactor using daily mass balances

    Oxygen transfer in biological wastewater treatment processes with high sludge concentration, such as membrane bioreactor (MBR), is an important issue. The variation of α-factor versus mixed liquor suspended solids (MLSS) concentration was investigated in a full scale MBR plant under process conditions, using mass balances. Exhaustive data from the Supervisory Control And Data Acquisition (SCADA) ...


    By IWA Publishing

  • Partech Case Study: Effluent Water Quality Monitoring at an Open Case Coal Site

    Merthyr Tydfil in Wales is home to the massive Ffos-y-fran land reclamation scheme by Millar Argent, where over 10 million tonnes of coal will be extracted in the next fifteen years! So what’s the point of the land reclamation scheme? The purpose is to restore the land to its former principle use and Partech are helping with the discharge monitoring on site. You ...


    By Partech (Electronics) Ltd.

  • How & When We Measure Turbidity

    Turbidity, along with Suspended Solids, is a way of measuring the clarity of a body of water, and how many particles are affecting it. The difference is that while Suspended Solids describes the density of the materials in the water, Turbidity describes how those materials affect light passing ...


    By Partech (Electronics) Ltd.

  • South West Water Exmouth case study

    It can be a tough job for the water treatment industry, faced with the needs to ensure the effectiveness of their treatment plants and processes whilst keeping operating costs within strict budgets. Finding a solution to these challenges means not only investing in the most appropriate technologies so that treatment works fulfil their obligations, but also evaluating ways of optimising ...


    By Partech (Electronics) Ltd.

  • On-line measurements provide more accurate estimates of nutrient loading: a case of the Yläneenjoki river basin, southwest Finland

    Automatic on-line measurement stations for water quality components and water level were equipped with dataloggers and GSM transmitters; the stations were installed at two sites in the Yläneenjoki river basin, SW Finland. Measurements during five seasons in 2006–2007 were conducted to find out whether the produced data would provide more accurate estimates of material and nutrient transport than ...


    By IWA Publishing

  • From mess to mass: a methodology for calculating storm event pollutant loads with their uncertainties, from continuous raw data time series

    With the increasing implementation of continuous monitoring of both discharge and water quality in sewer systems, large data bases are now available. In order to manage large amounts of data and calculate various variables and indicators of interest it is necessary to apply automated methods for data processing. This paper deals with the processing of short time step turbidity time series to ...


    By IWA Publishing

  • Turbidity Measurements in Drinking Water, Effluent Discharges and Coagulant Controlling

    This month at Partech Water Instruments we’re talking about our turbidity sensors—fantastic to use as an environmental indicator. So how can they be used? We’re here to tell you about turbidity sensors being utilised for drinking water, effluent discharges and coagulant controlling. Turbidity Sensors and Drinking Water Turbidity sensors ...


    By Partech (Electronics) Ltd.

  • Miller Argent case study

    On the hills above Merthyr Tydfil, Miller Argent is undertaking a highly ambitious land reclamation scheme that is also involving the extraction of coal by opencast methods. Known as the 'Ffos-y-fran Land Reclamation Scheme', this is the third and final phase of the East Merthyr Reclamation Scheme which is expected to run for another 17 years. The reclamation works will include the removal of ...


    By Partech (Electronics) Ltd.

  • Travels with Paul – Quarries and Wastewater Treatment Works

    We followed Paul’s visits in February so we could show you just what a Partech sales engineer does! The month started off in Romsey where Paul carried out a site survey at a very muddy quarry… Paul went to see if Partech could help with their flocculent dosing control. The Partech team are pretty certain they’ll be able to offer an excellent solution, but Paul went to lend a ...


    By Partech (Electronics) Ltd.

  • Southern water MLSS case study

    Southern Water has recently installed eight new Partech Turbi-Tech 2000LA systems at its East Worthing water treatment works for measuring Mixed Liquor Suspended Solids (MLSS) in the aeration tanks. This new installation takes Partech’s Turbi-Tech 2000LA and 7200 Series Monitor a step further in becoming the standard instrument for measuring mixed liquor throughout the whole of Southern ...


    By Partech (Electronics) Ltd.

  • Wastewater engineers go with the flow

    The efficiency of maintenance work has been improved by water treatment engineers employing Intellisonde monitors in their final effluent. Designed primarily to measure water quality, the Intellisondes also measure flow, and this reading is being used to detect the accumulation of debris that necessitates a maintenance visit. Wastewater treatment efficiency is often measured by the analysis of ...


    By Intellitect Water Ltd

  • Dairy Crest – Dairy Effluent Treatment Case Study and Partech Water Instruments

    In order to comply with environmental regulations, the food and beverage industry relies heavily on constant monitoring and control of wastewater and effluent, before discharge from the plant. Additionally, if process plants fail to be vigilant when it comes to monitoring all areas of waste treatment, the results can be unsuccessful. Partech’s water instruments are ...


    By Partech (Electronics) Ltd.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you