synthetic packaging material Articles

  • How To Handle Chemical Spills & Cleanups

    FAST-ACT is designed for liquid and vapor chemical releases, but the chemicals it attacks does not need to be limited to what we traditionally think of as a chemical spill. Toxic and noxious chemicals can come from a variety of sources such as waste water, decomposition, household chemicals, and animals. Since FAST-ACT can be applied to liquid spill or vapor release enabling Emergency Responders ...


    By Fast-ACT

  • Reduction of Waste from Synthetic Rubber Testing and Unreacted Styrene: Kemcor Australia

     Kemcor Australia has used cleaner production processes to reduce waste from synthetic rubber testing and unreacted styrene in small batch production, with significant cost savings. Background Kemcor Australia is a leader in the production of olefins, poly-olefins and synthetic rubber, and is part of the Altona (Victoria) chemical complex, the largest centre for primary ...


  • R&D testing the oxygen barrier properties of biodegradable packaging materials - Case Study

    The Hemicellulose research group have chosen the Systech Illinois 8001 oxygen permeation analyser to test the barrier properties of polysaccharide films. The University of Helsinki is at the forefront of international research and doctoral education. The quality of the University’s research is reflected in the high number of Centres of Excellence, Academy Professors, ...


    By Systech Instruments Ltd

  • University Research Group utilise the Systech 8001 OTR analyser to test the oxygen barrier properties of biodegradable packaging materials

    The University of Helsinki is at the forefront of international research and doctoral education. The quality of the University’s research is reflected in the high number of Centres of Excellence, Academy Professors, Fellows and Researchers. It is also actively involved in the Strategic Centres for Science, Technology and Innovation which enable leading research units and companies to ...


    By Systech Instruments Ltd

  • Sorting plant for domestic waste and light packagings, location: Spain

    Task Automation of the excisting sorting line for light packagings and optimisation of the processing  line for domestic waste (organic part).  The throughput rates of both lines shall be  considerably increased upgrading the quality  of the compost and recovering a higher proportion of light packagings at the same  time. Solution ...


  • Introduction to Decentralized Packaged Wastewater Treatment (PWWT) Systems - PDH Article

    Learning Objectives After reading this article, you should understand: Functions and processes of a decentralized PWWT system; Design considerations of a PWWT system. Overview "Clean water will be the oil of the 21st Century." The accuracy and magnitude of this statement is resonating worldwide. ...

  • When it comes to food packaging, what we don’t know could hurt us

    Recent analyses raise disturbing questions about the health and environmental effects of the stuff that encases our edibles. It’s almost impossible to imagine life without flexible, transparent and water-resistant food packaging, without plastic sandwich bags, cling film or shelves filled with plastic jars, tubs and tubes, and durable bags and ...


    By Ensia

  • IBC container shredding in Manchester case study

    The Manchester (England)-based company Reckon Packaging Limited is a leading manufacturer of HDPE synthetic containers in the United Kingdom. A WLK 15 shredder from WEIMA was recently commissioned there. The aim was to efficiently shred and recycle IBCs that could not be reused. Industrial Bulk Containers (IBCs) are used mainly in the chemical, food and pharmaceutics industries. Recon Packaging ...


    By WEIMA

  • Temperature and leak monitoring boosts safety and reliability

    Amcor Flexibles Singen GmbH is a manufacturer of printed and unprinted aluminum-based packaging materials and an experienced technical applications specialist. Its plant in Germany, equipped with rolling mills and finishing equipment, turns out approximately 200 million square meters of aluminum foil in various grades every year. High-performance drying equipment is essential for Amcor’s ...


    By ALLWEILER GmbH

  • Pharmaceuticals Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Heating value

    The CustomerThis Chemical Company is a leading supplier of performance polymers. Their products are used in a wide range of applications including adhesives, coatings, consumer and personal care products, sealants, lubricants, medical, packaging, automotive, paving, roofing and footwear products. The ProcessThe company uses flare stacks to dispose of the waste products ...

  • Stop trashing the climate

    In June, the Institute for Local Self-Reliance (ILSR) joined with Eco-Cycle and the Global Anti-Incinerator Alliance (GAIA) to release Stop Trashing the Climate, a report documenting the link between climate change and unsustainable patterns of consumption and wasting. Authored by Brenda Platt of ILSR, with coauthors Eric Lombardi of Eco-Cycle (Boulder, Colorado) and Dave Ciplet of GAIA, the ...


    By BioCycle Magazine

  • Batch blenders make modern mortars in China

    With no internal moving parts, blenders minimize abrasive wear and simplify cleaning at two SureBlock plants. In 1997, US-based SureBlock entered a joint venture with China's Tianjin People's Building Material Products Factory to make concrete masonry units (CMUs). Commonly known as concrete blocks, CMUs come in many shapes, sizes, and colors. They are mainly used to erect structural walls, ...

  • Green labels: The walk behind the talk - `Biodegradable`

    The word “biodegradable” is probably one of the easiest green labels to understand, so one may assume it is also the least likely to be subject to false claims. However, the term is still interpreted very loosely and frequently used on products that are toxic, that break down into harmful environmental contaminants, or that can take many decades, even centuries, to decompose. On top ...


    By green24

  • Manufacturing Goes Lean and Green

    Manufacturers around the world are uncovering the environmental as well as financial benefits of lean approaches. When John Quarmley started Highwood USA, a synthetic woods manufacturer, in 2003, he wanted the company to be good to its employees, to its community and especially to the environment. Based in the small town of Tamaqua, Pa., Highwood uses ...


    By Ensia

  • Industrial Biotechnology - ASTM Organizes New Technical Committee

    With a total population of nearly 7.2 billion people, and a new birth every eight seconds, our modest planet is straining at the seams. Finding ways to maximize the sustainability of the resources that support us all is of critical importance. One such effort falls under the general heading of industrial biotechnology, which is based on a fascinating premise: that ...


    By ASTM International

  • Picking Their Membranes - Part I -

    Membrane use by water suppliers may not be new, but suppliers are considering membranes in new ways -- by number and variety of applications. Membranes can work on a wider range of resource waters, more efficiently and for less cost than before. Among membranes' attractions as substitutes for conventional water-treatment technologies, such as filtration, distillation and ion-exchange are: ...


  • Lignin: A Possible Substitute for Petrochemicals in Products - Videos

    Usually burnt to heat the facilities at pulp and paper-making operations after valuable carbohydrate components such as cellulose have been separated from the woody feedstock—and sometimes cursed for its tendency to stick like glue to the other components of the wood—the polymer lignin, making up almost a third of the wood in trees, has become hot property in research and development ...


    By Bio4Energy

  • Emerging Technologies – How will they change our lives?

    Forward planning by governmental agencies is often criticized for being too focused on short term political mandate priorities.  A recent report by Policy Horizons Canada, a federal government agency, on emerging technologies is a refreshing change from that norm.  The report explored how emerging technologies will shape the economy and our society, and what challenges (and ...


    By GLOBE Foundation

  • Global Methyl Ethyl Ketone (MEK) Market - Industry Share, Szie, Trends And Analysis Forecast to 2020

    The global MEK market is expected to reach USD 3.26 billion by 2020, according to a new study by Grand View Research, Inc. Growing demand for paints and coatings in infrastructure, automotive and home furnishings is expected to remain a key driving factor for the global MEK market. Growing demand from key end-use industries such as construction and automotive, particularly from high growth market ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you