tank baffle Articles

  • Vortex in baffled surface aerator

    Baffled surface aerator and mixing tanks are different on the basis of the rotor placement. In mixing tanks, rotors are placed very deep in the tank, thus vortex creation can be prevented by placing the baffles. By definition, rotors are placed at or near the surface of water in surface aeration systems; complete prevention of vortex creation cannot be achieved by installing the baffles. Vortex ...


    By Inderscience Publishers

  • Tracer experiment and RTD analysis of DAF separator with bar-type baffles

    This paper describes the development of a new dissolved air flotation (DAF) separator with a flow streamlining baffle to improve solid separation efficiency. The analysis of the RTD (residence time distribution) curves indicated that the parameter θ10 (dimensionless time at which 10% of tracer has discharged) increased from 0.38 for control reactor to 0.54 for the ...


    By IWA Publishing

  • Water Tanks

    If you need to transport large amounts of water for your business, no matter what your business may be, you’re going to need a water tanker – and there’s no better place to get just what you need than here at Amthor International. Here at Amthor International, we provide a wide variety of options so that you can customize your water tanker to fit your specific needs. ...


    By Amthor International

  • Modeling settling tanks for water treatment using computational fluid dynamics

    A computational fluid dynamics model is presented for the calculation of the flow, suspended solids, and tracer concentration fields in the settling tanks of the water treatment plant of Aharnes, an important component of the water supply system of the greater area of Athens, Greece. The model is applied to investigate the expected negative effect of the wind on the hydraulic and settling ...


    By IWA Publishing

  • Two-phase simulations of an off-nominally operating dissolved-air flotation tank

    The flow patterns of the contaminated water and the air bubbles inside a large-scale Dissolved Air Flotation (DAF) tank were examined using CFD modelling. The DAF tank was operating off-nominally in the sense that it was supplied with bubbles larger than originally designed for. Attention was drawn to the location for air injection and the effect of having more than one-size bubbles in the tank, ...


    By Inderscience Publishers

  • Assessomg the Performance of Secondary Settling Tank by Means of Flow Modeling

    ABSTRACTA model of the double-decker rectangular settling tanks proposed for the Wastewater Treatment Plant of Besòs in Barcelona, Spain was prepared using Computational Fluid Dynamics (CFD). The modeling approach used was a three dimensional, multi-phase simulations with solids transport and removal included, and reflected the state of the art in clarifier modeling. Special attention was paid to ...

  • Development of a flocculation sub-model for a 3-D CFD model based on rectangular settling tanks

    To assess performance and evaluate alternatives to improve the efficiency of rectangular Gould II type final settling tanks (FSTs), New York City Department of Environmental Protection and City College of NY developed a 3D computer model depicting the actual structural configuration of the tanks and the current and proposed hydraulic and solids loading rates. Fluent 6.3.26™ was the base platform ...


    By IWA Publishing

  • Operation of a solids contact tank at low dissolved oxygen and low total suspended solids concentrations

    Solids retention time (SRT) and dissolved oxygen concentration (DO) set points were optimized at a 32 MGD trickling filter-solids contact tank system. OPTImasterTM on-line optimization software was used for set points selection. Set points were maintained automatically using SRTmaster and DOmaster - sludge age and dissolved oxygen automatic control systems. Referenced above biological system was ...

  • NEFCO, incorporated case history

    In mid-2007, the wastewater treatment plant in Monclova Mexico was faced with a dilemma. The City had just upgraded their biological treatment scheme to increase flow through their plant by 35%, from approximately 11.5 mgd to15.5 mgd. They needed to add either a fourth secondary clarifier to keep within they discharge limits of 10 ppm TSS, or improve the operation of their three existing ...


    By NEFCO, Inc.

  • Application of a CFD Model to Improve the Performance of Rectangular Clarifiers

    There has been a long standing debate about the relative merits of circular and rectangular clarifiers. Both have been shown to be capable of excellent performance and both have experienced problems. The hydrodynamics of each configuration under similar hydraulic loading differ in fundamental aspects that determine what types of geometric modifications are likely to improve the clarifier ...

  • Simple protocols for assessing dissolved air flotation systems: quantification of released air, bubble density and cloud patterns

    Dissolved air flotation (DAF) systems are useful for many water treatment applications. Optimizing a DAF system can be very difficult and complicated due to a multitude of variables that contribute to effective separation. Pressure, temperature, retention time and air mixing affect the ability of the saturator to increase air solubility, while baffle heights, flow rates and recycle ratios affect ...


    By IWA Publishing

  • What Do Wet Dust Collectors Do?

    Wet dust collectors are ideal for many operations, which include scrubbing, washing, and obscuring the pollutant out of the air and collecting it as a wet slush. Wet dust collectors come in various shapes and sizes, which mean you will always have a wide range to browse through, before you treat your business to this necessary, luxury device. These are ideal systems for many industries and ...


    By ProVent, LLC

  • Freytech oil water separators in car wash applications

    Knowing that oil can get into the reclaim water, David F. Roberts, the President of Freytech Inc., recommends the use of an enhanced coalescing oil water separator. “Even trace amounts of oil in the recycled water can diminish the quality of the wash,” he said. “An ‘oil trap’ is not enough since it is simply a tank with baffled walls which does trap some of the oil ...


    By Freytech Inc.

  • Physical Modeling Reveals Secrets, and Identifies Modifications to Improve Hydraulic Performance

    ABSTRACTA scaled physical model of the high purity oxygen process at the Sacramento Regional Wastewater Treatment Plant was used to evaluate the flow distribution problems and identify potential fixes. A comprehensive field testing program was implemented to collect data needed for calibrating and verifying the physical model. The calibrated physical model was then used to determine possible ...

  • Environmentally friendly sequencing batch reactor design keeps noise, energy & capital costs low

    Perry Township in Fayette County, Pennsylvania is one of the first SBR plants to utilize a surface mounted process aerator/mixer, which is a significant improvement over the traditional diffused air network designs. The new layout offers substantial capital investment savings as well as significant reductions in noise, operations/ maintenance, and energy consumption. KLH Engineers, Inc., ...

  • Temporary treatment systems for large construction site in Stratford, East London

    Filter refurbishment program for 2000 site workers/staff Site Contractor: Natta Building Company Peak flow to treatment: 10.5l/s Designed consent standard: 20 mg/l BOD, 30 mg/l TSS & 10 mg/l NH4 Maximum incoming BOD: 380 mg/l Maximum incoming NH4: 50 mg/l Units supplied: 4 off 300pe GRP units 1 off 750pe steel unit 2 off HB50 Lamella settling tanks (primary and ...


    By WPL Ltd

  • Sequencing batch reactor

    Sequencing batch reactors (SBR) or sequential batch reactors are industrial processing tanks for the treatment of wastewater. SBR reactors treat waste water such as sewage or output from anaerobic digesters or mechanical biological treatment facilities in batches. Oxygen is bubbled through the waste water to reduce biochemical oxygen demand (BOD) and chemical oxygen demand (COD) to make suitable ...


    By IWA Publishing

  • Sequencing batch reactor

    Sequencing batch reactors (SBR) sequential batch reactors are industrial processing tanks for the treatment of wastewater. SBR reactors treat waste water such as sewage or output from anaerobic digesters or mechanical biological treatment facilities in batches. Oxygen is bubbled through the waste water to reduce biochemical oxygen demand (BOD) and chemical oxygen demand (COD) to make suitable for ...


    By IWA Publishing

  • Challenging Engineering Design and Ultra Pure Fabrication for the Semi-Conductor Industry

    Challenging Engineering Design and Ultra Pure Fabrication for the Semi-Conductor Industry The semi-conductor industry is one of the most demanding in terms of its requirements from suppliers. Only a few companies worldwide have the expertise, the facilities, the knowledge and the experience to be considered when new plant equipment is put out for bidding. Similar to the pharmaceutical and food ...


    By Fabricated Plastics Limited

  • Temporary treatment systems for large construction site in Stratford, East London case study

    Posted March 2009 by WPL Limited Filter refurbishment program for 2000 site workers/staff Site Contractor: Natta Building Company Peak flow to treatment: 10.5l/s Designed consent standard: 20 mg/l BOD, 30 mg/l TSS & 10 mg/l NH4 Maximum incoming BOD: 380 mg/l Maximum incoming NH4: 50 mg/l Units supplied: 4 off 300pe GRP ...


    By WPL Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you