tank high level alarm Articles

  • Fuel terminal upgrade installs advanced valve actuation and control - Case Study

    Sector: Oil & Gas Category: Control Networks, Electric Actuators, Fluid Power Actuators, Services Products: CP, Extended Scope, Field Service, IQ3 Range, Pakscan Overview Independent tank storage provider Vopak is increasing and enhancing fuel capacity at the Vopak Terminal Durban in South ...


    By Rotork

  • San Juan Island well production and tank level monitoring case study

    San Juan Island is a popular resort destination whose population fluctuates with the season and the arrival of Orca whales and salmon runs. To get to the island, you must first drive an hour north of Seattle to the city of Anacortes. From there you take a two-hour ferry ride through a 130 island group to arrive at the 20 mile San Juan Island, which is at the waterway entrance to Puget Sound. Bob ...


    By Mission Communications, LLC

  • Controlling food additives level in a process tank case study

    SmartScan50 provides real time level measurement results of food additives during production for a major chemical supplier. The customer is a prominent supplier of ingredients and fine chemicals for the food, cosmetic, detergent, and pharmaceutical industries, and also specializing in the manufacture and development of Citric Acid, Citrates and Phosphates. The company invests greatly in its ...

  • Water bottling plant chooses Greyline for level control

    When of Calgary Alberta needed to automate water tank levels at their bottling plant in Calgary Alberta they called on Packaging of High River, Alberta for system advice. They selected Greyline SLT32 Ultrasonic Level Monitors with digital level display and programmable control relays for level control in five stainless steel tanks. Culligan were able to double up level monitoring of two tanks ...


    By Greyline Instruments Inc.

  • Water Bottling Plant Chooses Greyline for Level Control

    Culligan were able to double up level monitoring of two tanks with one instrument because pairs of identical-sized tanks were interconnected with a 2” pipe near their base. The Greyline SLT32 was calibrated to display the combined volume of both tanks. This function worked with a two vertical tanks as well as a pair of horizontal round tanks where the SLT32’s HRT round tank volume ...


    By Greyline Instruments Inc.

  • Water bottling plant chooses Greyline for level control

    Culligan were able to double up level monitoring of two tanks with one instrument because pairs of identical-sized tanks were interconnected with a 2” pipe near their base. The Greyline SLT32 was calibrated to display the combined volume of both tanks. This function worked with a two vertical tanks as well as a pair of horizontal round tanks where the SLT32’s HRT round tank volume ...


    By Greyline Instruments Inc.

  • Controlling level of toxic liquids for the foam industry case study

    Solid provides a durable solution for level controlling of toxic liquids, using the SmartScan 50L ultrasonic measurement gauge. Polymers Ashkelon Industries located in the city of Ashkelon, is a major supplier of foam for the furniture and mattresses industry in Israel. The company has a long-standing reputation in manufacturing of foam in various shapes and sizes for mattresses, furniture and ...

  • Deep and Dirty - Derby Sewage Treament Works Inlet tank

    Derby STW had a significant problem with float switches 'ragging-up' in this very large inlet works. Other ultrasonic equipment failed and the customer did not believe an ultrasonic solution could work.....until Pulsar became involved. Pulsar Process Measurement supplied non-contacting ultrasonic level measurement equipment into the main transfer pumping station at Severn Trent Derby STW, in an ...

  • Tank terminal demonstrates the electrically operated solution for ESD Valves - case study

    Overview Since the disastrous fire at the Buncefield fuel depot in 2005, much has been done to ensure that such a catastrophic accident should not happen again. Led by COMAH (Competent Authority/Industry Standards Task Group), safeguards have been put in place by the petroleum industry to provide additional safety and environmental protection to tank storage installations. Endorsing the ...


    By Rotork

  • Sludge Blanket Level Detection – making new process opportunities possible

    Much Pulsar's Self-Cleaning Viper Sludge Sensor of the demonstrating the effective maintenance-free solution. discussion around the way we deal with sewage sludge – the way it is moved around the process, the bellmouth valves and decant processes, the downstream treatment of the liquors, important issues around TOTEX and discharge Compliance, plus more recently the ...

  • Swedish solution for high-rise building fires

    Swedish fire fighting nozzle specialists, Unifire AB, have developed what may very well usher in a new era in fire fighting: a fully automatic fire detection and extinguishing system, called FlameRanger. The system, according to Unifire, is capable of detecting and extinguishing a fire in seconds of its breaking out, with minimal use of water, and without any human intervention required. Unifire ...


    By Unifire AB

  • Modbus network for hospital water treatment

    Six SmartScan50 were connected via a RS485 ModBus network in order to monitor the level in hospital water treatment tanks. The Challenges The customer needed to measure the level and determine when to fill or to empty each tank after or during the treatment. Light foam was present A communication network was required Before choosing SolidAT’s ...

  • Helping veolia transform waste into bio-fuel case study

    LIPODAN, a VEOLIA company, is a plant for recycling grease, food grease and used oil which is collected from restaurants, from gas stations, car garages, bus companies and similar locations. The plant treats 12,000 Tons of organic oils and 6,000 Tons of mineral oil per year. For recycling, the plant is using the LIPOVAL process. The oils are first converted to LIPOFIT, an ...

  • Improving steel production processes case study

    SmartScan 50 improves efficiency of steel manufacturing in Gujarat district, India. The steel corporation of Gujarat is India's leading manufacturer of metal products. The company produces hot and cold steel rolls and uses state-of-the-art technology in its plant to ensure high quality products to its clientele around the globe. The problems The hot and cold steel rolls ...

  • Fuel Polishing & Transfer Systems

    Earlier this year, Algae-X International came out with a totally new line of Fuel Polishing & Transfer Systems designed and built there in Fort Myers, Florida facilities. By listening to its customers, boat builders and yacht owners alike, Algae-X found out what they wanted to have as an on board fuel optimization package. The design is modular, so the right system can be chosen for each ...


    By AXI International

  • GE Leakwise Application Notes: Leak Detection by Groundwater Monitoring

    Risks of Groundwater Contamination Hydrocarbon leakage, from Underground Storage Tanks (USTs) and from the bottoms of above ground tanks, can seep into the groundwater, where it forms a floating oil sheen, or a thick oil layer. This layer, if left undetected, ...


    By GE Analytical Instruments

  • Instrumented Safety: The right balance

    The different functional safety guides and standards such as IEC61508/511, which impose formal schemes for the safety instrumented functions (SIF), have brought significant safety gains to the process industry over the last 30 years. Still, we can observe a drift in the application of those standards, which often leads to increased costs, loss of operability, and, more worrying, a false ...

  • CO2 Gas Hazards in the Brewing Industry

    The hazards associated with CO2 in the brewing industry are well known, yet people still die needlessly every year in tragic and completely avoidable accidents in breweries. Just last year in Germany, which has a good safety record, two workers died in separate incidents at the same brewery. In the first incident, the owner was found dead with his head and torso in a beer mixing tank. It is ...

  • Wyman Gordon Case Study

    Wyman-Gordon is a world class materials company with nearly 200 years of metals engineering experience. They are the acknowledged leader in the production of high-quality closed-die forgings and extrusions for the most critical applications. Markets served include those for commercial and military aircraft; gas turbine engines; oil and gas exploration; land based gas turbine and power generation; ...


    By Mech-Chem Associates, Inc.

  • CO2 Monitor For Breweries: Carbon Dioxide Safety and How to Stay Safe

    Carbon dioxide is a necessary byproduct of the brewing process, yet too much CO2 can be dangerous to employee health. In Germany, two workers died at the same brewery in 2012 due to hazardous levels of CO2 present in beer mixing and pressure tanks. Learn more about how CO2 levels can get out of control during the beer brewing process and ways to protect your staff from this deadly gas.  ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you