tank monitoring equipment Articles

  • Fuel terminal upgrade installs advanced valve actuation and control - Case Study

    Sector: Oil & Gas Category: Control Networks, Electric Actuators, Fluid Power Actuators, Services Products: CP, Extended Scope, Field Service, IQ3 Range, Pakscan Overview Independent tank storage provider Vopak is increasing and enhancing fuel capacity at the Vopak Terminal Durban in South ...


    By Rotork

  • San Juan Island well production and tank level monitoring case study

    San Juan Island is a popular resort destination whose population fluctuates with the season and the arrival of Orca whales and salmon runs. To get to the island, you must first drive an hour north of Seattle to the city of Anacortes. From there you take a two-hour ferry ride through a 130 island group to arrive at the 20 mile San Juan Island, which is at the waterway entrance to Puget Sound. Bob ...


    By Mission Communications, LLC

  • Monitoring level of fuel and diesel oil in cylindrical tanks case study

    SmartScan 50L delivers a reliable measurement solution for monitoring fuel and diesel oil in a municipal Central Post Office. This Post Office provides postal services throughout the country. To provide its services around the clock, the office invests huge efforts in maintaining its building at the highest standards. The problems The Central Post Office uses fuel oil for ...

  • Two models for tank cleaning

    Fluid treatment specialist Algae- X International, Fort Myers, Fla., has expanded its Mobile Tank Cleaning (MTC) series with two new models. The MTC 500-AFR is an adjustable flow rate system for use with a wide range of tank sizes and fluid types such as diesel, biodiesel and hydraulic fluid. The MTC 1000-LX is the next generation of Algae-X’s MTC 1000 unit, now with stainlesssteel plumbing and ...


    By AXI International

  • Fuel alternatives for heavy equipment

    High fuel prices are leading composters and wood grinders to reevaluate diesel-guzzling heavy equipment, looking to alternatives that are both more cost-efficient and environmentally friendly. This could be as “simple” as filling up existing machines with biodiesel blends, could involve swapping out a diesel model for an electric one, or even go as far as generating electricity on site to power ...


    By BioCycle Magazine

  • Chemical Cleaning and Decontamination of Refinery and Petrochemical Distillation Equipment

    1. Abstract In refineries and petrochemical plants the equipment needs to be checked during planned shutdown. This can require several weeks of downtime, if columns, vessels, heatexchangers and tanks have to be drained to remove deposits and armful gases such as hydrogen sulfide, benzene and other volatile hydrocarbons. Formation of iron sulfide is very common in oil refineries and ethylene ...


    By Kurita

  • Monitoring DMA level case study

    ABIC, a leading provider of veterinary products chooses MonoScan to monitor the level of DMA (Dimethylamine) tank in one of its plants located in Israel. ABIC, wholly owned by Teva Pharmaceutical Industries Ltd, is Israel's largest veterinary products manufacturer. The company produces a wide range of vaccines for poultry and livestock and other animals. ABIC's plants are equipped with ...

  • Keeping Tanks Online and Divers Out of the Water

    Huntley’s Sub Aqua Construction brings piece of mind to customers with regular and efficient mini remotely operated vehicle inspections Huntley’s Sub Aqua Construction (HSAC) is a commercial diving company based in Kentville, Nova Scotia, Canada. Operating since 1994, HSAC recently added a Deep Trekker mini remotely operated vehicle (ROV) to their team to improve potable water ...


    By Deep Trekker Inc.

  • Carbon dioxide monitoring for food processing

    Application Carbon dioxide monitoring for food processing Equipment G100 CO2 analyser Location Okehampton, UK Customer Kerry Foods Requirement The customer was looking for a CO2 monitor to detect small changes in CO2 levels in the headspace above food products ...


    By Geotech

  • Improved monitoring of citric acid level

    MonoScan improves level monitoring of citric acid processing by providing advanced non-contact ultrasonic level measurement solution for Israel's leading provider of food additives. GBI, is a world known provider of citric acid for the food industry. The company supplies citric acid (HOOCCH2C) and other food additives ...

  • Tank terminal demonstrates the electrically operated solution for ESD Valves - case study

    Overview Since the disastrous fire at the Buncefield fuel depot in 2005, much has been done to ensure that such a catastrophic accident should not happen again. Led by COMAH (Competent Authority/Industry Standards Task Group), safeguards have been put in place by the petroleum industry to provide additional safety and environmental protection to tank storage installations. Endorsing the ...


    By Rotork

  • Efficient monitoring of glucose level case study

    MonoScan provides an efficient monitoring of glucose level in as leading jam manufacturers. The manufacturing is based on grapes to produce jams, confiture and related products for the food industry. The company sought an ultrasonic level measurement solution that will improve monitoring over the glucose level in the storage tanks and reduce costs throughout the plant. The ...

  • Final effluent monitors protect wastewater treatment efficiency

    Southern Water operates 370 wastewater treatment plants (WWTP), many of which are unmanned for most of the time and most have numeric environmental permits, so a network of online monitors has been established to improve treatment and protect discharge compliance. This has involved the installation of final effluent monitors at over 300 sites in a programme that has lasted for more than ten ...


  • Increasing efficiency with permanent leakage monitoring - Case study

    Abstract In this paper information from Water Authorities in the USA, Europe, Middle East and Australia that have purchased permanent monitoring leak detection equipment is reviewed and the findings are presented in a structured format that covers the following: Justification for permanent monitoring Evaluating the different product offerings Selecting the ...


    By Gutermann AG

  • Monitoring once through cooling water - Case study

    The Situation Power plants and paper mills use service water loops and mill water loops respectively for the cooling of lubricating, hydraulic, turbine and transformer oil.  These cooling systems feature large, recirculating volumes of water which are treated with biocides, dispersants, and corrosion inhibitors. By comparison, refineries often ...

  • CO2 Monitor For Breweries: Carbon Dioxide Safety and How to Stay Safe

    Carbon dioxide is a necessary byproduct of the brewing process, yet too much CO2 can be dangerous to employee health. In Germany, two workers died at the same brewery in 2012 due to hazardous levels of CO2 present in beer mixing and pressure tanks. Learn more about how CO2 levels can get out of control during the beer brewing process and ways to protect your staff from this deadly gas.  ...

  • OSU Researchers Deploy Stevens Equipment in Study of Green Infrastructure Treatment for Groundwater Runoff

    Stormwater runoff pollution is a serious issue that faces almost every urban and suburban environment. In older city infrastructure, runoff from roofs, parking lots, and streets flows directly into the sewer system and must be handled by the municipal wastewater treatment facility, increasing the amount of work the system must undertake. For the past 30 years, the infrastructure for stormwater ...

  • Re-agent dosing - Sodimate installs standardised equipment to meet the specifications of each plant case study

    Water quality refining is the most essential step in water treatment processes. When done properly, it guarantees palatable taste characteristics suitable for drinking water. The reliability and accuracy of the processes for storing, metering, and dissolving the required re-agents are indispensible for successfully completing this final treatment. Outlined below is a case story about Viry- ...


    By Sodimate, Inc

  • Why a CO2 monitor may be needed? Where carbon dioxide leaks occur

    Do you work with carbon dioxide (or CO2) in your industry? If so, then you may need a carbon dioxide monitor to check for gas leaks that could pose a hazard to your workplace safety. Learn common scenarios where carbon dioxide can leak and see how a CO2 detector can minimize your risk.  Industries Where CO2 Monitors Can Make a ...

  • GE Leakwise Application Notes: Leak Detection by Groundwater Monitoring

    Risks of Groundwater Contamination Hydrocarbon leakage, from Underground Storage Tanks (USTs) and from the bottoms of above ground tanks, can seep into the groundwater, where it forms a floating oil sheen, or a thick oil layer. This layer, if left undetected, ...


    By GE Analytical Instruments

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you