tank vapor control Articles

  • Food Processing: Venturi Scrubber and Separator Cuts Steam Costs Case Study

    New Solutions to Plant Problems:Soybean extraction at Land 0 ‘ Lakes, Inc., Sheldon, IA, is an energy- intensive operation. Beans must be cleaned, properly dried, tempered, cleaned a second time, fragmented, and heat-conditioned to increase smface area and distort cell walls. On the extraction side of the process, soybean flakes are extracted by repeated countercurrent percolation of hexane ...


    By CR Clean Air Group, LLC

  • Measuring level of chemical solutions case study

    MonoScan provides a non-contact ultrasonic answer for measuring the level of chemical solutions in KunMing Chemical company. KunMing Qingshang Chemical is China's leading provider of a variety of chemical products. The company produces several types of chemical solutions such as, Ammonium Chloride (NH4CI), Niter (KNO3) and more. These solutions are stored in large vessels and need to be carefully ...

  • Improved monitoring of citric acid level

    MonoScan improves level monitoring of citric acid processing by providing advanced non-contact ultrasonic level measurement solution for Israel's leading provider of food additives. GBI, is a world known provider of citric acid for the food industry. The company supplies citric acid (HOOCCH2C) and other food additives ...

  • Maintaining level of acidulants in the food industry case study

    Reducing delivery costs and time by utilizing Solid's SmartScan 25L for level measurement of acidic liquids in Gadot Biochemical factory. Gadot Biochemical Industries Ltd. (GBI) located in Israel, is a prominent world-wide supplier of ingredients and fine chemicals for the food, cosmetic, detergent, and pharmaceutical industries, and specializes in the manufacture and development of Citric Acid, ...

  • Efficient monitoring of glucose level case study

    MonoScan provides an efficient monitoring of glucose level in as leading jam manufacturers. The manufacturing is based on grapes to produce jams, confiture and related products for the food industry. The company sought an ultrasonic level measurement solution that will improve monitoring over the glucose level in the storage tanks and reduce costs throughout the plant. The ...

  • Level measurement of ferric chloride case study

    MonoScan provides ongoing measurement results of Ferric Chloride (FeCl3) solution in one of Israel's most advanced wastewater treatment plant. The Ashdod wastewater treatment plant has invested significantly in state-of-the-art control systems to ensure 100% usage of the wastewater entering its facilities. The plant is self sufficient, by using its own resources providing power, water and gas. ...

  • High VOC Loadings in Biofilters - Petroleum and Industrial Applications

    ABSTRACTMore cost effective alternate technologies are needed to meet the demands of existing and upcoming Federal air regulations. Bio-Reaction Industries, Inc. (BRI) has developed a patented, modular, high-rate, vapor-phase biofilter that has provided such a solution for a major oil company for the past four years. This compact system has adsorbed and digested high VOC surge concentrations ...


  • Oh Honey! What an ultrasonic device can do… case study

    MonoScan enables 24/7 level monitoring of liquid honey for a leading provider of honey products. The Apiary manufactures and markets natural products based on honey, bees' products and herbs. This company specializes in natural health products based pure honey, recently invested greatly in stateof- the-art equipment for its production line to achieve enhanced performance and output throughout its ...

  • Retro-Coat™ Achieves Site Closure by Meeting Environmental Screening Levels Case Study

    Lombard Street Retrofit – San Francisco, CA Retro-Coat™ (patent pending) was selected to mitigate vapor intrusion within a structure built in 1907 that had been impacted by both a former underground storage tank and a local dry cleaner. Indoor air samples taken prior to application showed chlorinated solvent-based PCE and TCE levels above the ...

  • Evaporator Limits Boron to 5 PPM at award-winning chemical plant

    Problem: The biggest challenge confronting Rohm & Haas Corp. in building a wastewater plant for its chemical facility in Elma, Wash., was meeting Washington State Dept. of Ecology limitations on boron of 5 ppm. The Elma plant manufactures sodium borohydride, a versatile chemical used in a variety of applications ranging from the generation of sodium hydrosulfite for reductive bleaching of ...


    By Oil Skimmers, Inc.

  • Shredding of highly flammable hazardous waste

    Satrind S.p.A. has a consolidated experience in engineering plants with nitrogen blanketing protection system for shredding of highly explosive hazardous waste in previously sealed into proper containers (such as metal or plastic drums, IBC tanks, etc.) and sludge material. During treatment of hazardous wastes, vapors or flammable gases are released with dangerous emissions which are highly ...


    By SatrindTech Srl

  • Ammonia Emergency Plan Calls on Packed Tower to Scrub Released Chemicals,

    A few years ago Union Camp turned a corner.  Management decided that advance planning would take the place of reacting after the fact to an emergency or regulatory agency demands.  At Union Camp’s Dover, OH. facility, byproducts of the paper industry are converted into usable specialty chemicals for cosmetics, adhesives and other industries. Crystallization is a process used intensively ...


  • Halogenated Volatile Organic Compounds

    Sites where halogenated VOCs may be found include burn pits, chemical manufacturing plants or disposal areas, contaminated marine sediments, disposal wells and leach fields, electroplating/metal finishing shops, firefighting training areas, hangars/aircraft maintenance areas, landfills and burial pits, leaking collection and system sanitary lines, leaking storage tanks, radioactive/mixed waste ...

  • Industrial Sludge Wastewater Treatment

    Industrial Sludge Wastewater Treatment Industrial Sludge Treatment Facility Oxygen Mixing Injection Dissolved Oxygen Boosted with Liquid Oxygen to Improve Bacteriological ...


    By Integrated Engineers Inc.

  • Case study - Paint mixing

    Overview A company involved in the automotive aftermarket had a paint batch mixing and filling operation that used primers and fillers. They were faced with installing air pollution control equipment to handle the volatile organic compounds (VOCs) emitted by the solvents used in their processes. An independent consultant had determined that total exhaust volume from the facility was ...

  • Industrial Sludge Treatment

    Industrial Sludge Wastewater Treatment Industrial Sludge Treatment Facility Oxygen Mixing Injection Dissolved Oxygen Boosted with Liquid Oxygen to Improve ...


    By Integrated Engineers Inc.

  • Case study: Redwood City

    GTR + C3 Overview Neighborhood: Downtown Heating Tubes: 9 Heating Period: 6.5 Months Destruction Rate Efficiency: > 99% Contaminant: PCE, TCE Geology: Silt Silty Clay Volume: 142 yd3 ...

  • Industrial Pond Treatment

    This small municipality was experiencing difficulty in maintaining dissolved oxygen levels in their industrial ponds. During the processing season, they were receiving 3MGD of industrial wastewater from tomato and green pepper processors. During the previous season, they had been out of compliance on numerous occasions and received several complaints from the public concerning odor from the ...


    By Integrated Engineers Inc.

  • Case study - Pemaco superfund site remediation

    OVERVIEW Pemaco was formerly a chemical facility located in a light industrial and residential area of Maywood, CA, adjacent to the Los Angeles River. No one knows how long hazardous substances had been leaking into the ground but the operations date back to the 1940's.  Up until closure of the facility in 1991, chlorinated solvents, aromatic solvents, and flammable liquids had ...

  • Chlorinated solvents: methylene chloride and TCE

    Introduction This paper presents the results of a scaled and phased approach to source remediation of high concentrations of recalcitrant chlorinated solvent compounds via soil vapor extraction (SVE) and vapor treatment at a Site in Southern California. Phase I began with refrigerated condensation (C3) in order to achieve high mass removal rates to reduce lifecycle costs and time ...


    By GEO Inc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you