tds monitoring Articles

  • TDS: `The Done Sale`

    Many Americans have at least some concern that their tap water is problematic, yet they don’t know where to begin. The TDS, or total dissolved solids, meter can be the first step in determining if there’s a problem. The term TDS has long been well-known in the water treatment industry, yet still has not penetrated the mass consumer market. However, by hearing your brief explanation, ...


    By HM Digital, Inc.

  • Oil Sampling Best Practices (Part 2)

    Understanding Dynamic Particle Equilibrium in Closed Loop Systems Dynamic Equilibrium Condition (DEC) is defined as a steady state condition where the normal wear rate in a machine results in no net gain or loss of particles. ...


    By Spectro Scientific

  • E-Z Trays an Integral Part of Levelland`s Groundwater Treatment - Case Study

    QED E-Z Tray® Air Strippers an Integral Part of Levelland's Groundwater Treatment System The refinery at the former Motor Fuels Corporation produced all grades of gasoline, tractor fuels, diesel, distillate products, and fuel oils. It closed in 1954 after 15 years of operation, and the refinery equipment was removed by 1958. The property has since been redeveloped, but the ...


    By QED Environmental Systems

  • Oil Sampling Best Practices

    Obtaining a representative oil sample from a closed loop lubrication system is essential to any good oil analysis program. As oil analysis programs become more standardized for routine monitoring, especially within equipment warranty support programs, equipment makers provide more sampling points on new equipment. These ...


    By Spectro Scientific

  • Total Dissolved Solids (TDS) Measurement

    Definition Total Dissolved Solids (TDS) is a measure of the sum of all inorganic and organic substances in a liquid in molecular, ionized or micro-granular colloidal suspended form. The solids must be small enough to survive filtration through a sieve the size of two micrometer.  TDS solids are normally found in all freshwater systems. Major applications of TDS are: at low levels the ...


    By IC Controls Ltd.

  • Monitoring Phenol in Water

    The Situation A plant located in the eastern United States manufactures phenolic resin for applications in plastics molding. This plant uses well water for cooling its reaction process and then discharges the water into a local creek. A leak in the reactor and associated cooling equipment would cause phenol and phenolic compounds to contaminate the cooling water. Such a leak could ...

  • Monitoring Oil in Cooling Water

    The Situation A municipal power plant in the southern United States operates more than 10 stationary power plant engines capable of producing 52 megawatts of electric power. The plant is part of a larger statewide power grid system. Within the grid, the municipality brokers the purchase or sale of power hourly, based on the needs of municipality and the market rate for power on the grid ...

  • Monitoring Hydroelectric Dam Sumps

    TD-4100 Oil in Water Monitors for Hydroelectric Dam Sumps TD-4100 Oil in Water Monitors for Hydroelectric Dam Sumps Hydroelectric Dams produce electric power via the force of the water flowing through the dam. There are numerous sources for oil spillage: The hydroelectric turbines are lubricated by standard lubrication oils; The very large water control valves are normally ...

  • RO monitors and Controllers: pros and cons

    A look at a range of devices for watching TDS. One major question a potential customer may ask before they purchase a point-of-use/point-of-entry (POU/POE) water treatment system is, “How often will I need to change the filter?” Maintenance and service are directly related to two of their major concerns: money and health. People don’t want to spend money unnecessarily, yet they ...


    By HM Digital, Inc.

  • Monitoring Leaks from Heat Exchanger - Paper Plant

    The Situation A Paper plant in the Eastern US uses 500 GPM filtered pond water for cooling lubricating oil in their paper line.  The now warmer water is sewer to an on-site pond.  Because the water is used to cool lubricating oil, the plant could not reuse the water in their pulping process for fears of possible oil contamination of the paper pulp.  The plant needed to be ...

  • Stand alone device for monitoring Temperature & Humidity of Server Room/Data Center

    This small data logger is a stand alone temperature & humidity monitor. This works on separate power supply and has a battery back up as well. Salient Features: ...


    By Vacker LLC

  • Biological Monitoring Tools for Recycling Hazardous Effluents

     Abstract Increasing dependence on chemicals and rapid developments in chemical technology have practically triggered the growth of chemical industries in India. Globally, Basel convention guidelines are available for transboundary movement of hazardous wastes. However, at the national levels, health damage, resources losses and ecological impairment due to hazardous wastes indiscriminate ...


  • Designing and Implementing Perimeter Air Monitoring Programs

    Perimeter or fenceline ambient air quality and meteorological monitoring programs have become increasingly valuable at hazardous waste, landfill, dredging, ports, and MGP remediation sites. Air quality monitoring programs protect public health and reduce owner liability ...


    By AECOM

  • The Effectiveness of Intrawell ground water monitoring statistics

    Abstract   The reality of the new statistical evaluation requirements for ground water at Subtitle D facilities are being felt nationwide. All too often these requirements are resulting in unnecessary increases in ground water monitoring costs and erroneous indications of facility impacts. For example, a common situation faced by many older facilities is that there is ...


    By Sanitas Technologies

  • Stacking up: flare Monitoring from LumaSense

    Lenny Shaver, LumaSense Technologies’ director of product management, explains the company’s IR and pyrometer technologies FLARING systems are common in many industries to burn gases before they enter the atmosphere. The safe operation of a flaring system requires the continuous monitoring of pilot flames and flared gases to ensure that vented gases are ignited. As ...

  • Hardware Solutions to Monitor Gas and Thermal Energy

    Why Monitor Gas and Thermal Energy? Hang on, are you telling me you are an energy manager that’s only worried about electricity!? Let’s take a step back and realise that gas represents nearly 40% of the total energy consumed in the industrial and service sectors in Europe. That’s almost half, you guys! ...


    By DEXMA

  • Oil Monitoring in Trans-Border River Uh Between Ukraine and Slovakia

    The Problem: Long-term contamination of Uh river by waste motor oil, aircraft fuel, etc., being by-products of Russian army bases on Ukrainian part of the border.  Slocakia needed to protect its rivers from this pollution by early oil warning systems on Uh river, since it flows into other rivers, flowing into Black Sea. The Solution: Sample water is taken from river surface by float sampler ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you