temperature cable Articles

  • GPRS Temperature Sensor (GTH202)

    Overview We provide a plug and play GPRS temperature or temperature and humidity sensor kit (Model: GTH202). Its standard inclusion has a Wi-Fi data logger, a temperature or temperature & humidity sensor and a USB power cable. With the web-based monitoring portal and mobile apps, you can easily remotely monitor the temperature and humidity in different locations, such as your bedroom, IT ...

  • Temperature Profiling - Real-time Snowpack Temperature Profiling at Alaska’s Turnagain Pass - Case Study

    BeadedStream, in coordination with Kasteler Consulting, Inc. (KCI) and The Chugach National Forest Avalanche Information Center (CNFAIC) is in the second year of snowpack data collection at Turnagain Pass, Alaska. Problem The Seward Highway is the only thoroughfare for traffic between Anchorage, AK and the Kenai Peninsula. The road takes travelers over Turnagain Pass which is ...


    By BeadedStream

  • Mind the bandgap | A temperature profiling technology comparison

    When it comes down to determining temperature in environmental media, there are many options—from fiber-optic to infrared sensing technologies—to observe and quantify the relative kinetic energy of a material. For single point data acquisition and a given specific temperature range and target medium, of course certain technologies are more optimal than others.  When it comes to ...


    By BeadedStream

  • Ground Temperature Monitoring - HAARP Research Station - Case Study

    The High Frequency Active Auroral Research Program (HAARP) is a research program designed to study the properties and behavior of the ionosphere. The program, which is jointly funded by the U.S. Air Force, the U.S. Navy, the University of Alaska and the Defense Advanced Research Projects Agency, operates the HAARP Research Station, a world-class facility 180 miles ENE of Anchorage and ...


    By BeadedStream

  • Aluminium temperature measurement developments

    Previously in Aluminium International Today, Richard Gagg discussed the importance of accurate temperature measurements for modern aluminium extrusions. In this article, he discusses parallel developments, which now enable non-contact temperature sensors to automatically and dynamically track and accommodate physical process changes as they occur. Higher quality extrusions and increased ...


    By AMETEK Land

  • How to Choose the Ideal Oven Temperature Logger

    Read This Before You Decide On An Oven Temperature Profiling Data Logger Vendors regularly speak with customers to address the key question: “How do I choose the ideal oven temperature logger for my oven temperature application?” Whether you are an engineer planning for your next furnace temperature profiling project or a paint shop filling a requisition intended for paint testing as part of ...


    By CAS DataLoggers

  • Do you need to monitor temperature and humidity in controlled environments?

    Look no further. This compact and easy-to-use instrument is ideal for constant monitoring of temperature and humidity measurements in environments where a record of data for traceability is required. It is ideal for use in medical product storage facilities, warehousing and distribution, containers, industrial processes, laboratory environments, museums, and classrooms. With a ...


    By ATP Instrumentation Ltd

  • Assessment of detection limits of fiber-optic distributed temperature sensing for detection of illicit connections

    Distributed temperature sensing (DTS) with fiber-optic cables is a powerful tool to detect illicit connections in storm sewer systems. High-frequency temperature measurements along the in-sewer cable create a detailed representation of temperature anomalies due to illicit discharges. The detection limits of the monitoring equipment itself are well-known, but there is little information available ...


    By IWA Publishing

  • Guide to Choosing the Right Temperature Sensors

    Temperature measurements are among the most common data logging applications found across a broad variety of industries including medical monitoring, cold chain integrity, machine monitoring, and many more. There are 4 main types of temperature sensors that are used with data loggers, and it can seem like a lengthy decision to find the right type. ...


    By CAS DataLoggers

  • New modular options for AQMesh air quality monitoring systems

    The AQMesh small sensor air quality monitoring system already offers flexibility of monitoring location – through independent power and communications – as well as high data quality and traceability. Now the platform is even more flexible offering up to 20 different data channels. The wide range of sensors, including gases such as NO2, particulate matter (PM1, PM2.5 and PM10) wind and ...


    By AQMesh

  • How to Choose the Ideal Oven Temperature Logger

    Read This Before You Decide On An Oven Temperature Profiling Data Logger Vendors regularly speak with customers to address the key question: “How do I choose the ideal oven temperature logger for my oven temperature application?” Whether you are an engineer planning for your next furnace temperature profiling project or a paint shop filling a requisition intended for ...


    By CAS DataLoggers

  • Simpler sub-floor cable management with Alphastrut raised access flooring - Case Study

    When Alphastrut set out to design its aluminium support system, the primary aim was to develop a product that would save weight on offshore platforms. However, the engineers soon realised that it was also an opportunity to deal with other problems, including the limitations of standard sub-floor cable management solutions. ...


    By Alphastrut Ltd

  • Using distributed temperature sensors to monitor an Antarctic ice shelf and sub-ice-shelf cavity

    ABSTRACT. Monitoring of ice-shelf and sub-ice-shelf ocean temperatures represents an important component in understanding ice-sheet stability. Continuous monitoring is challenging due to difficult surface access, difficulties in penetrating the ice shelf, and the need for long-term operation of non-recoverable sensors. We aim to develop rapid lightweight drilling and near-continuous fiber-optic ...


    By In-Situ, Inc.

  • Arctic Sea Ice Mass Balance Buoys - University of Manitoba Environment and Geography Center for Earth Observation Science - Case Study

    The University of Manitoba Environment and Geography Center for Earth Observation Science is monitoring the evolution of ice growth and melt by researching the exchange of heat between the ocean, ice, and atmosphere. There is worldwide concern about the environmental conditions in the Arctic. The University of Manitoba Environment and Geography Center for Earth Observation Science is using a ...


    By BeadedStream

  • Can I monitor multiple points on one datalogger?

    Yes – using the Ebro EBI-310 USB datalogger you can monitor up to 3 points with one unit. The logger has a built in sensor, but by adding an adapter and external probes the one unit can monitor the temperature of up to 3 locations. This could mean monitoring the laboratory room temperature, ...


    By Camlab Limited

  • Distributed Thermal-Acoustic Data Integration

    Silixa has developed a technique called Distributed Thermal Acoustics (DTA) to monitor simultaneously the thermal and acoustic profile along a hybrid optical fibre cable in submarine environments. Using its world leading distributed fibre optic technology (ULTIMATM DTS and iDASTM) Silixa deployed an optical fibre cable along the seabed and across the water column in an active gas seepage ...


    By Silixa Ltd

  • EPG Pumps – Suitable for Class I, Div 1 & 2

    Before a pump can be considered suitable to be used in Class I, Division 1 hazardous (classified) locations, it must first meet at least  one of the four criteria established in paragraph (a) of the National  Electric Code (NEC), Article 501-8 Motors and Generators. Condition (4) states: “Of a type designed to be submerged in a liquid that is flammable  only when vaporized ...


    By EPG Companies Inc.

  • Building Foundation Monitoring - ASRC NS Facility Phase I - Case Study

    The community of Deadhorse began and still exists today as a hub for oil field services support. The area experiences constant expansion and improvement, and in this instance required a general duty shop built by ASRC, located close to the Deadhorse airport and across from the recently built Aurora hotel. Specifically, this new facility will provide light and heavy duty shops, offices and wash ...


    By BeadedStream

  • Ice Melt Management - Wilkins Aerodrome - Case Study

    The Wilkins Aerodrome is perhaps Australia’s most unusual aerodrome, located approximately 70 km southeast of Casey Station in Antarctic Australian territory. The Australian single runway has served as the Antarctic terminal for intercontinental air service since 2007 and it operates between the months of October and March. Problem The aerodrome’s location was ...


    By BeadedStream

  • Oksrukuyik Creek Deep Foundation Verification Study - Long-Term Bridge Abutment Monitoring on Alaska’s Haul Road - Case Study

    Roughly 100 miles south of Deadhorse, Alaska, replacement of Oksrukuyik Creek Bridge warranted application of an ad-freeze pile design for two bridge abutments supporting the bridge deck. In light of permafrost soils and thermal influences from the creek’s thaw bulb, long term temperature profiling along the abutments was implemented to verify efficacy of the foundation design. ...


    By BeadedStream

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you