temperature controller Articles

  • 10 Reasons why you should continuously monitor low temperature and liquid chemical sterilants for worker safety

    1. Sterilant chemicals are highly toxic Low temperature and liquid chemical sterilants are designed to kill all microorganisms including resistant spores and if they were not toxic, they would not be effective in sufficiently high concentration to destroy all microbial life including the chemically resistant sporicidal forms of certain ...


    By ChemDAQ, Inc.

  • MSW Management: Safely Countering the Rise of Landfill Odors

    One of the core challenges of landfill and compost site management is fighting the rise of foul odors. In addition, as communities expand further out from previous areas, they eventually become neighbors to landfills – calling for a comprehensive odor-control approach to countering odor complaints. In fact, compared to other industrial applications such as wastewater treatment and asphalt ...


    By OMI Industries (OMI)

  • Flow Rate Measurement in Full Pipes Using the Transit Time Method

    Particularly in large diameters the relevance of water volume measurement is growing. The challenge with cooling water or fresh water processes is to generate accurate flow recordings or to document and to control individual consumptions and withdrawal quantities. Flow detection, however, particularly in large diameters is highly demanding. In such cases the transit time measurement thanks to its ...


    By NIVUS GmbH

  • The Electrothermal MC810B Digital Temperature Controller

    We get a lot of enquiries about the Electrothermal MC810B Digital Heating Controller, specifically concerning its functionality and compatibility with other Electrothermal ...


    By Camlab Limited

  • Pressure Washing Equipment for Temperature Control

    Pressure washing equipment with heating capabilities has one advantage over non-heated pressure washing equipment. These machines can use hot as well as cold water. Therefore, when purchasing pressure washing equipment, it is always a good idea to purchase machines that allow for temperature control. Hot Water Applications Hot water cleans where cold water cannot. Heat acts on ...


    By Daimer Industries Inc.

  • Intellisenc Greenhouse Controllers for control of CO2, Humidity and temperature

    Optimum and accurate CO2 level is important for effective and efficient plant growing. Too much CO2 creates diminishing return on expense and too little fails to utilize your capital investment. Optimum control of all facets of the growing environment results in high productivity at less costs. Plants need to be able to shed moisture to maintain their capacity to draw in nutrients from the soil. ...


  • Solar energy dissipation and temperature control by water and plants

    Ecosystems use solar energy for self-organisation and cool themselves by exporting entropy to the atmosphere as heat. These energy transformations are achieved through evapotranspiration, with plants as 'heat valves'. In this study, the dissipative process is demonstrated at sites in the Czech Republic and Belgium, using landscape temperature data from thermovision and satellite images. While ...


    By Inderscience Publishers

  • Effective Temperature Control for Cement Kiln Off-Gases

    INTRODUCTIONEffective off-gas temperature control without unwanted side effects can be achieved in many cement plants with state-of-the-art evaporative spray technology. Gas temperatures have elevated in recent years from as low as 180°C to over 370°C. This is coincident with a higher proportion of 'dry' operation kilns. Evaporative cooling water sprays in conditioning towers, ducts or at the ...


  • High-temperature air pollution control technology

    Based on 35 years’ experience working for the environment, French company Maguin has developed the Cercat filter for high temperature air pollution control. David Gambier describes the technology and its potential use in the glassmaking industry.Maguin has been present in the waste thermal treatment field since the 1970s, offering customers innovative and state-of-the-art concepts. The company’s ...

  • High Temperature Combustion of Biogas

    High Temperature Combustion of Biogas Efficient combustion of biogas Controlled and concealed combustion Combustion temperature > 900°C Residence time more than 0.3 s Insulated combustion chamber High safety standard The HOFGAS® - IFL4c high temperature flare provides safe and environmentally-friendly combustion of biogas. The exhaust gas ...


    By Hofstetter BV

  • Do you need to monitor temperature and humidity in controlled environments?

    Look no further. This compact and easy-to-use instrument is ideal for constant monitoring of temperature and humidity measurements in environments where a record of data for traceability is required. It is ideal for use in medical product storage facilities, warehousing and distribution, containers, industrial processes, laboratory environments, museums, and classrooms. With a ...


    By ATP Instrumentation Ltd

  • Effect of microwave and hot air drying on flax straw at controlled temperatures

    Flax stems were subjected to microwave drying at controlled temperatures. The rate of drying was then compared with conventional hot air drying. The product temperature was maintained at 40°C, 60°C and 80°C for both microwave and hot air drying. The moisture content of flax stem was about 70% (wet basis). The microwave drying was conducted in a microwave apparatus which recorded mass, ...


    By Inderscience Publishers

  • Temperature Control of Experiments and Equipment – how do you keep your cool?

    Maintaining a constant temperature is vital in many processes to ensure consistency and safety, however this can be difficult in a working environment. Cooling systems might be used to keep a reaction or piece of equipment below room temperature, but they are also employed to remove excess heat generated by the system to give a constant temperature which might be at, or even above, the ...


    By Camlab Limited

  • Agriculture minimum temperature

     Agriculture minimum temperature Prediction of minimum temperature and frost damage is a common method and important application in the field of agriculture like outdoors crop growth. In particular those areas where vegetation can be exposed to low temperatures, frost can be disastrous for young vegetation or fruits.When the ...


    By Delta OHM S.r.L.

  • West Control Solutions announces eCAL- a new 1/16 DIN (48mm x 48mm) compact temperature controller

    Automated Control Engineering is the exclusive national supplier of the newest WEST product. West Control Solutions have announced the enhancement of its CAL Controls brand temperature controller portfolio by introducing eCAL, a compact, cost-effective temperature and process controller with extended capabilities. The new 1/16 DIN controller is easy to install and useful to retrofit, it is ideal ...

  • Comparative analysis of modern control and AI–based control for maintaining constant ambient temperature

    The objective of this paper is to study various control techniques in order to maintain constant ambient temperature by controlling the position of gas solenoid valve and expansion valve that control the volume of gas flow to the burner and volume of cool air flow into the room. In order to control the room temperature conventional P, PI, PID, model reference control (MRC), fuzzy logic control ...


    By Inderscience Publishers

  • Characterization of high temperature solar thermal selective absorber coatings at operation temperature

    Abstract In cooperation between the Physikalisch-Technische Bundesanstalt (PTB) and the SCHOTT Solar CSP GmbH (SCHOTT Solar) measurements have been carried out with the goal to assure, that the directional-hemispherical reflectance measurements, done as production control by SCHOTT Solar, lead to applicable results for calculating the emittance of absorber tubes for parabolic trough ...

  • Control water – control mold

    There is no single universal way to eliminate all mold growth. But the single most effective method of controlling mold is to eliminate their source of moisture. Moisture doesn’t just mean actual water; it can also be high humidity. Few molds grow when the humidity is under 70%. If they do, it is very slowly. It is safe to say that you cannot stop mold growth until you stop the moisture. ...

  • Controlling condensation - controlling mold

    You know those water stains on the ceiling tiles in your office that you are certain are caused by a leaky roof.  Of course, the maintenance man thinks your crazy, since your office is not on the top floor.  He dutifully changes the ceiling tile and a month later the water stain is back but this time it has those little black circles that look like mold colonies. Sound familiar? There ...

  • Controlling condensation- controlling mold

    You know those water stains on the ceiling tiles in your office that you are certain are caused by a leaky roof. Of course, the maintenance man thinks your crazy, since your office is not on the top floor. He dutifully changes the ceiling tile and a month later the water stain is back but this time it has those little black circles that look like mold colonies. Sound familiar? There seems to be ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you