temperature measurement product Articles

  • What`s the Best Air Pollution Control Technology for My Process?

    Air pollution control equipment is not something that business owners address by saying, “Let’s do the right thing for the environment and install an oxidizer!” In fact, the scenario is more likely to be “We need to increase productivity (always a good thing!), but that will put us over our annual emissions limits. Do we know what we will need? Where do we start? Who can ...

  • Gas Hydrate Breakdown Unlikely to Cause Massive Greenhouse Gas Release

    The breakdown of methane hydrates due to warming climate is unlikely to lead to massive amounts of methane being released to the atmosphere, according to a recent interpretive review of scientific literature performed by the U.S. Geological Survey and the University of Rochester. Methane hydrate, which is also referred to as ...

  • Transformational adaptation – when climate change means business as usual is no longer possible

    1. A lesson from the past Deep in the central Sahara, a crumbling mud-brick town sits at the edge of a dry lake bed. This is the medieval town of Germa, in southwestern Libya, one of a string of settlements along the Wadi al-Ajal, a valley defined by the towering dunes of the Ubari Sand Sea to the north, and the black cliffs of the Messak Settafet plateau to the south. Germa is romantic ...


    By Garama 3C Ltd

  • The benefits of monitoring compressed air

    Compressed air is used in many manufacturing processes for many different reasons, from the actuation and control of pneumatic valves and cylinders to the operation of process machinery and tooling. It can also be used as a transport medium for bulk materials or as a purge gas. For all its uses it is nonetheless expensive. This is why, through detailed monitoring, a business can enjoy the ...


    By Contrec Europe Limited

  • Analyzer underpins growth of container inspection company

    After a career as a customs officer in the Netherlands, Wim van Tienen was well aware of the toxic gas hazards presented by some freight containers, so in 2009 he started a company, Van Tienen Milieuadvies B.V., offering gas analysis and safety advice. The company grew quickly and now employs 23 staff. Wim attributes a large part of this success to the advanced FTIR gas detection and analysis ...


    By Gasmet Technologies Oy

  • Low energy mixing to optimize anaerobic digestion at the Kitchener WWTP

    The existing Kitchener Wastewater Treatment Plant (WWTP) is a conventional secondary treatment facility, with a rated capacity of 122,745 mVd. The plant is comprised of two separate secondary treatment plants (Plant 1 and Plant 2) served by a common headworks facilities and primary clarifier facilities. Plant 1 was constructed in the early 1960s and Plant 2 was constructed in the mid-1970s. Both ...

  • Measuring of landfill gas production

    Type     HOFGAS®- Smarty S  Commissioning     2002 Site     Nurmijärvi (FI) Situation An accurate estimation of the landfill gas production will support the operator at the Nurmijärvi landfill site in planning the final gas collection and degassing system. A mobile degassing plant was installed to measure the quantity ...


    By Hofstetter BV

  • Measuring gases in AD and landfill – Which is the right product for your application?

    With over 30 years' experience in the landfill and biogas sector, Geotech is synonymous with gas analysis, supplying monitoring equipment to over half of the UK biogas and landfill market, with a further 4000 portable gas analysers sold throughout the world.  Geotech's product portfolio is tailored to satisfy a multitude of environmental monitoring requirements; our clients tell us the ...


    By Geotech

  • Measuring gases in AD and landfill – Which is the right product for your application?

    With over 30 years' experience in the landfill and biogas sector, Geotech is synonymous with gas analysis, supplying monitoring equipment to over half of the UK biogas and landfill market, with a further 4000 portable gas analysers sold throughout the world.  Geotech's product portfolio is tailored to satisfy a multitude of environmental monitoring requirements; our clients tell us the ...


    By Geotech

  • Characterization of high temperature solar thermal selective absorber coatings at operation temperature

    Abstract In cooperation between the Physikalisch-Technische Bundesanstalt (PTB) and the SCHOTT Solar CSP GmbH (SCHOTT Solar) measurements have been carried out with the goal to assure, that the directional-hemispherical reflectance measurements, done as production control by SCHOTT Solar, lead to applicable results for calculating the emittance of absorber tubes for parabolic trough ...

  • The Electrothermal MC810B Digital Temperature Controller

    We get a lot of enquiries about the Electrothermal MC810B Digital Heating Controller, specifically concerning its functionality and compatibility with other Electrothermal ...


    By Camlab Limited

  • Cycle chemistry pH measurement

    pH measurement in high purity water has met with variable success. The high resistivity of pure water, the vulnerability to contamination, the variability of reference electrodes and additional temperature effects converge to make tins a particularly challenging measurement. Overcoming these obstacles requires a thorough understanding of the potential problems and their systematic solution. ...


    By SnowPure Water Technologies

  • Measurement of moisture in HBr

    Introduction Moisture in corrosive gases will accelerate the rate of metal corrosion in gas supply systems which, in turn, can lead to their premature failure. For this reason, it is important to monitor moisture levels in these gases. FTIR is an effective way to monitor for moisture in these corrosive gases. In order to determine low levels of moisture in corrosive gases, it is ...


    By CIC Photonics, Inc.

  • Effect assessment of temperature on biogas production from bovine rumen and banana (Musa acuminata) stem undergoing anaerobic codigestion

    In this research banana (Musa acuminata) stem waste and bovine rumen were taken to undergo degradation by anaerobic codigestion. The stem and rumen were mixed to obtain four ratios of substrate and three replicates were taken for each. 750 mL bioreactors were used, with a 3 temperature factorial arrangement (25, 35 and 45°C). Initial conditions and final physicochemical parameters were analysed. ...


    By Inderscience Publishers

  • Development and measured performance of a batch reactor for biodiesel production from fresh and waste vegetable oils

    The development and measured performance of a batch reactor for biodiesel production from fresh and waste vegetable oils as feedstock is presented. A biodiesel batch reactor was fabricated using locally sourced materials. Three different transesterification reactions were performed on the feedstocks using the fabricated reactor. The reaction temperature and time were varied for the fresh and ...


    By Inderscience Publishers

  • Mercury free solutions for autoclave temperature monitoring

    Mercury is a naturally occurring element found in the air, water and soil however exposure to the substance, even in small amounts, can lead to severe health and ecosystem issues. Mercury in products can find it’s way into the environment in all sorts of ways such as manufacturing, spills, recycling and disposal. Due to the health risks posed products such ...


    By Camlab Limited

  • Determining Concrete Maturity Using Temperature Data Loggers

    CAS DataLoggers has provided the temperature monitoring devices for a construction contractor which needed to monitor and record the cure of structural concrete onsite. Once workers could prove that the concrete was strong enough, they could then proceed with new construction. The company was on a tight ...


    By CAS DATALOGGERS

  • E-Guide Measuring Oil Viscosity

    The most important physical property of a lubricating oil is viscosity. Viscosity determines the load carrying ability of the oil as well as how easily it circulates. The correct balance between high viscosity for load carrying and low viscosity for ease of circulation must be considered for any lubricant and its application. ...


    By Spectro Scientific

  • Reducing Costs of Steam Flow Measurement

    Traditionally, steam flow has been measured with a differential pressure device. This is typically an orifice plate. However, such devices are inherently volumetric flow measurements. As we have discussed in previous blog posts, changes in pressure and temperature ...


    By Sierra Instruments, Inc.

  • 5 Reasons to Use WiFi Temperature/Humidity Monitoring

    Low-Cost Wireless Data Loggers Protect Your Inventory As wireless monitoring and alarming is becoming even more widespread and affordable, many supply and cold chain companies are turning to WiFi-capable devices to monitor their inventories for temperature and humidity. Now CAS DataLoggers can help you save on costs and time ...


    By CAS DATALOGGERS

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you