temperature measuring instrument Articles

  • The Relationship Between Radiative Forcing and Temperature: What Do Statistical Analyses of the Instrumental Temperature Record Measure?

    Abstract  Comparing statistical estimates for the long-run temperature effect of doubled CO2 with those generated by climate models begs the question, is the long-run temperature effect of doubled CO2 that is estimated from the instrumental temperature record using statistical techniques consistent with the transient climate response, the equilibrium climate sensitivity, or the effective ...


    By Springer

  • Introducing LaserGas III SP CO – a combustion analyzer for rough environments

    NEO Monitors unveils the industry’s most compact CO combustion analyzer suitable for the most demanding environments. LaserGas III CO includes measurement of CH4, H2O and temperature in one single unit designed to reduce risk. Based on decades of experience and customer feedback, NEO Monitors has designed an Ex-d certified tunable diode laser (TDLS) analyzer. The instrument is ...


    By NEO Monitors AS

  • Tech Tip: Deploying Sea-Bird CTD in Ice

    Large numbers of Sea-Bird conductivity instruments have been used in Arctic and Antarctic programs. Special accommodation to keep temperature, conductivity, oxygen, and optical sensors at or above 0° C is advised. Often, the CTD is brought inside protective doors between casts to achieve this. Conductivity Cell When freezing is possible, we ...

  • ´More Stations. More Data. Better Forecasts.´ – the NYS Mesonet

    “More Stations. More Data. Better Forecasts.” – that’s the slogan of New York State Mesonet. The weather observation network consists of a total of 125 weather stations all over the state of New York and Lufft was selected as one of the vendors to support them in capturing the data. All 125 of the weathers stations have the standard instrumentation suite. Of those 125, 17 ...

  • Direct Mass Flow or Volumetric: The Thermal Flow Meter Technology Advantage!

    In today’s world where everyone is watching the bottom line, you need high performance, cost-effective instrumentation—and capillary thermal mass flow meters and controllers have been proven to meet this criteria in a wide range of process applications. Thermal mass flow technology is an industry standard for mass flow control of gases because it measures flow directly, at the ...


    By Sierra Instruments, Inc.

  • Two Detector Solution to Analyzing Sulfur

    Sulfur compounds are reactive, corrosive to pipes, and destructive to catalysts in petroleum refineries. Sulfur emission are strictly regulated globally. When released into the atmosphere sulfur dioxide converts to sulfuric acid resulting in adverse effects on human health and the environment. Sulfur detection is found useful in many other industries; therefore, detection of sulfur compounds in ...


    By Restek Corporation

  • Noise Measurement

    Definitions Threshold and criterion levels The threshold level is the A-weighted sound level at which a personal noise dosimeter begins to integrate noise into a measured exposure. For example, if the threshold level on a sound level meter is set at 80 decibels (dB), it will capture and integrate into the computation of dose all noise in the employee's hearing zone that equals or exceeds 80 dB. ...


  • Agriculture minimum temperature

     Agriculture minimum temperature Prediction of minimum temperature and frost damage is a common method and important application in the field of agriculture like outdoors crop growth. In particular those areas where vegetation can be exposed to low temperatures, frost can be disastrous for young vegetation or fruits.When the ...


    By Delta OHM S.r.L.

  • Sonic temperature significance and limitations

    The ATI sonic thermometer measures temperature from transit times t1 and t2 measured along the vertical path of the anemometer's probe. They are the times taken by sound pulses to traverse the 15-cm acoustic path in opposite directions; (these same transit times are used also for computing the vertical wind component). The instrument exploits the strong dependence that exists between the speed ...

  • Barrier Quality of Pharmaceutical Blister Packaging measured using Systech Illinois WVTR and OTR instruments

    Since 1967 Tekni-Plex, Inc, has provided solutions for innovative packaging and tubing products.  For their clients in the pharmaceutical and medical industries, the company has specialized in the development and manufacture of blister films offering superior barrier against ingress and egress of moisture and oxygen. In 2011 Tekni-Plex set up a Global Technology Center in Holland, Ohio, ...


    By Systech Instruments Ltd

  • Grain size distribution and sediment flux structure in a river profile, measured with a LISST-SL instrument

    Abstract New data on sediment transport in a river are reported using a LISST-SL laser diffraction instrument that simultaneously measures velocity, optical transmission, depth, temperature, and sediment particle size distribution (PSD) isokinetically. Suspended sediment concentration (SSC)is obtained from the sum of PSD. Optical transmission is seen to be nearly constant in the top ...


    By Sequoia Scientific, Inc.

  • Wastewater Level Measurement Techniques

    Level monitoring and control is a fundamental requirement in any wastewater treatment process. You will find level instrumentation installed at even the simplest treatment plants for pump control, chemical storage tanks and process level controls or alarms. Operators have only limited or emergency control over treatment plant influent, so level controls and instrumentation play an important role ...


    By Greyline Instruments Inc.

  • ppb Dissolved oxygen measurement

    Dissolved oxygen (D.O.) measurement is one indicator of water quality because oxygen is a common element contributing to corrosion reactions. This corrosion reaction provides the need for low level D.O. control since dissolved oxygen is responsible for costly replacement of piping and equipment by corrosive attack on metah. what is Dissolved Oxygen? Dissolved axygan (D.O.f is the ...


    By IC Controls Ltd.

  • ppm Dissolved oxygen measurement

    Dissolved oxygen (D.O.) levels are used as a general indicator of water quality. Oxygen is essential to life and vital for countless aquatic forms. D.O. level control is critical in numerous applications ranging from the monitoring of industrial waste water to environmental surveillance. What is Dissolved Oxygen? Dissolved oxygen (D.O.) is the amount of oxygen gas dissolved in a ...


    By IC Controls Ltd.

  • Measuring level by weight

    Measuring level or inventory by weight provides high accuracy. The weight is not affected by ingredients that foam or settle unevenly or by changes in density or the shape of the tank. Weight is weight, regardless of percent solids, bridging, rat-holing, or whether your ingredient is conductive or sound-absorbing. Because weighing is a noncontact method of measuring level, there is no chance of ...


    By Hardy Process Solutions

  • Online flow measurement

    Background The undershoot weir in Hohensaaten was built in 1913. It has three openings and regulates the discharge from the Oderbruch and from the Finow canal into the Hohensaaten-Friedrichsthaler-waterway. Moreover, it protects parts of the Oderbruch against Oder floods. The weir controls the waterlevels in the Havel-Oder-waterway and in the reach of Niederfinow- Hohensaaten. ...

  • Cycle chemistry pH measurement

    pH measurement in high purity water has met with variable success. The high resistivity of pure water, the vulnerability to contamination, the variability of reference electrodes and additional temperature effects converge to make tins a particularly challenging measurement. Overcoming these obstacles requires a thorough understanding of the potential problems and their systematic solution. ...


    By SnowPure Water Technologies

  • Gill Instruments case study featured in AWE International

    AWE International magazine, which is focused on the environmental analysis industry, recently featured Gill Instruments in a case study about environmental monitoring with solid-state meteorological instruments. The case study includes information about all of the products within the Gill Instruments range, with information about their advantages within the environmental analysis field. We have ...


    By Gill Instruments Limited

  • Portable Monitoring Instruments Solve Flow Rate Mystery

    The Glen Walter Sewage Collection System was built to service 1080 customers in 1989. At the time the population was 850 but by 1995 the sewage treatment plant had already reached capacity. Shawn Killoran took over the Operations Manger position in 1999 and, along with the Mayor and Council, he immediately had concerns about the excess flow. The Township started by video taping all of the lines ...


    By Greyline Instruments Inc.

  • Scintillation effect in LISST – The importance of temperature differences

    Scintillation is what makes stars twinkle. It is what causes mirage in deserts or on hot surfaces. It is what causes shimmer underwater in the vicinity of hot vents in oceans. These effects result from temperature fluctuations in air or water. The same effect can occur in a LISST optics cell if not properly controlled . The importance of scintillation in LISST instruments first became evident ...


    By Sequoia Scientific, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you