temperature monitoring system Articles

  • Reverse Osmosis and Nanofiltration Membrane Filtration Systems: Common Problems and How to Fix Them

    Reverse osmosis (RO) and nanofiltration (NF) are membrane filtration technologies that are designed to remove solute ions and molecules from a pretreated liquid stream. Well-designed RO/NF units are compact and demand relatively little maintenance, making them an attractive alternative to conventional treatment trains. Even despite the merits of today’s efficient RO/NF technologies, it pays ...


    By SAMCO Technologies, Inc.

  • Sterilization System Monitors Temperature and Humidity

    CAS DataLoggers recently provided the temperature and humidity datalogging solution for a decontamination and sterilization facility using Ethylene Oxide (EtO) preconditioning rooms as part of its painstaking safety process. The environment within these rooms needed to be continually monitored for both safety and quality assurance purposes, and the huge ...


    By CAS DATALOGGERS

  • Weather Information Service Engine Project (WISE)

    Weather Information Service Engine Project (WISE) is dedicated to resolve urban environmental issues including high-resolution weather forecasting, urban flooding prediction, road meteorology and urban carbon dynamics, and new urban service systems to minimize and mitigate the impacts of natural disasters and climate change on urban dwellers. WISE is targeting South Korea’s capitol, ...


    By Apogee Instruments, Inc.

  • UV Minimises Risks for Major Food Retailers

    For many years, one of the UK’s largest food manufacturers has made it their business to be the best at producing all manner of bespoke cooked and raw, ready-to-eat vegetables and carbohydrates for their customers, who include chilled food manufacturers, food-to-go operators and, of course, major supermarkets. Being the best means not only complying with food quality standards set by ...


    By atg UV Technology

  • Determination of Flow Rates in part-filled Applications using the Radar Method

    Introduction The radar measurement method plays an increasingly important role in the water and wastewater field. This is particularly reflected by the "Metering outside of the medium" trend. Flow measurement using radar which enables contactless measurements thus becomes a major focal point. It features a wide range of applications and hence is useful as permanent measurement system for ...


    By NIVUS GmbH

  • BACnet enabled Wireless Temperature Monitoring System

    Area of engagement Solution to integrate wireless temperature monitoring system with BMS (Building Management System). Client A leading manufacturer of wireless temperature- and humidity-transmitters. Requirements Client offered a Temperature Monitoring System which consists of Wireless Transmitters and Application ...


    By SoftDEL Systems

  • Titanium Demand on Rise for Additive Manufacturing Printing: How it’s Made? Titanium Plasma Atomization.

    Plasma atomization is used in many applications, including 3D printing. First developed in 1998, this technique has risen to become the industry standard process for creating reactive metal powders suitable for 3D printing. Learn how plasma atomization works and why you need an oxygen monitor to stay safe with plasma atomization.  How Plasma Atomization Works ...

  • Remote Temperature Monitoring in a Hospital Morgue

    CAS DataLoggers recently provided the automated temperature monitoring solution for Euclid Hospital, a member of the Cleveland Clinic Health System featuring one of the region's leading rehabilitation and orthopedic centers. ...


    By CAS DATALOGGERS

  • Mercury free solutions for autoclave temperature monitoring

    Mercury is a naturally occurring element found in the air, water and soil however exposure to the substance, even in small amounts, can lead to severe health and ecosystem issues. Mercury in products can find it’s way into the environment in all sorts of ways such as manufacturing, spills, recycling and disposal. Due to the health risks posed products such ...


    By Camlab Limited

  • Differential Pressure and Temperature Monitoring in a Hospital Cleanroom

    Accsense A1-01a Wireless Environmental Data Loggers CHESTERLAND OH—April 9, 2012 CAS DataLoggers recently provided the wireless pressure and temperature monitoring solution for a hospital maintaining a surgery cleanroom to protect patients from a variety of environmental contaminants. Staff entered and exited through airlocks and were required to wear cleanroom suits before entering. Air ...


    By CAS DATALOGGERS

  • Temperature and leak monitoring boosts safety and reliability

    Amcor Flexibles Singen GmbH is a manufacturer of printed and unprinted aluminum-based packaging materials and an experienced technical applications specialist. Its plant in Germany, equipped with rolling mills and finishing equipment, turns out approximately 200 million square meters of aluminum foil in various grades every year. High-performance drying equipment is essential for Amcor’s ...


    By ALLWEILER GmbH

  • Group method of data handling and neural networks applied in temperature sensors monitoring

    In this work a monitoring system is developed based on the Group Method of Data Handling (GMDH) and Artificial Neural Networks (ANNs) methodologies. GMDH creates non-linear algebraic models for system characterisation and ANN is a massively parallel distributed processor made up of simple processing units called neurons. The monitoring system was applied to the IEA-R1 research reactor at ...


    By Inderscience Publishers

  • Stand alone device for monitoring Temperature & Humidity of Server Room/Data Center

    This small data logger is a stand alone temperature & humidity monitor. This works on separate power supply and has a battery back up as well. Salient Features: ...


    By Vacker LLC

  • A novel approach for designing large-scale river temperature monitoring networks

    Water temperature is an important control on processes in aquatic systems and particularly for freshwater fish, affecting growth, survival and demographic characteristics. In recognition of this importance, the Scottish Government has prioritised developing a robust national river temperature monitoring network. Advances in geographical information systems, spatial statistics and field data ...


    By IWA Publishing

  • Gas Detection and Monitoring Systems

    In greenhouse applications, the accurate measurement of a number of environmental parameters such as carbon dioxide concentration, temperature, light intensity, water, humidity, pH and nutrient levels using sophisticated sensors is used to create a controlled environment for optimising plant growth rates while minimising energy usage. Carbon dioxide concentration is also one of the best ...


    By Edinburgh Instruments Ltd

  • Early warning system to forecast maximum temperature in drinking water distribution systems

    Climate change poses new challenges in preventing the exceedance of the maximum allowed temperature in the drinking water distribution system (DWDS). The objective of this article is to evaluate the feasibility of forecasting the maximum temperature in the DWDS. Two options were analysed: (1) using the records of the last day as forecast for the coming 2 days and (2) using 2-day weather forecast ...


    By IWA Publishing

  • Monitoring and warning system - case study

    TenCate GeoDetect is the first sensor enabled geotextile on the market to provide soil reinforcement, structural health monitoring and an early warning system into one package. Our “intelligent geotextile” is the first system designed specifically for geotechnical applications and offers a technical solution for monitoring geo-structures for changes in strain, temperature or the ...

  • Construction and Civil Infrastructures Monitoring Systems

    Civil infrastructures are usually monitored through its whole life cycle. SHM (Structural Health Monitoring) technologies enable the estimation of the structural state and detection of structural change that affects the performance of a structure. Two discriminating factors in SHM are the time-scale of the change (how quickly the state changes) and the severity of the change. These factors ...

  • 10 Reasons why you should continuously monitor low temperature and liquid chemical sterilants for worker safety

    1. Sterilant chemicals are highly toxic Low temperature and liquid chemical sterilants are designed to kill all microorganisms including resistant spores and if they were not toxic, they would not be effective in sufficiently high concentration to destroy all microbial life including the chemically resistant sporicidal forms of certain ...


    By ChemDAQ, Inc.

  • Monitoring System for Hydrologic Evaluation of Landfill Covers

    Three test sections were constructed and instrumented to assess the hydrologic behavior of earthen final covers at two municipal solid waste landfills. A traditional design using a “resistive barrier” was used for two of the test sections, whereas an alternative design using a “capillary barrier” was used for the third test section. The test sections were built in two distinctly different ...


    By ASTM International

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you