temperature recorder Articles

  • Warmest Decade on Record Brings Record Temperatures and Weather Extremes

    In recent years weather events have whiplashed between the extremes of heat and cold, flooding and drought. Carbon dioxide and other greenhouse gases—largely from the burning of coal, oil, and natural gas—have loaded up in the atmosphere, heating the planet and pushing humanity onto a climatic seesaw of weather irregularities. High-temperature records in many places are already being ...


    By Earth Policy Institute

  • The Relationship Between Radiative Forcing and Temperature: What Do Statistical Analyses of the Instrumental Temperature Record Measure?

    Abstract  Comparing statistical estimates for the long-run temperature effect of doubled CO2 with those generated by climate models begs the question, is the long-run temperature effect of doubled CO2 that is estimated from the instrumental temperature record using statistical techniques consistent with the transient climate response, the equilibrium climate sensitivity, or the effective ...


    By Springer

  • Eco-economy indicator: past decade the hottest on record

    The first decade of the twenty-first century was the hottest since recordkeeping began in 1880. With an average global temperature of 14.52 degrees Celsius (58.1 degrees Fahrenheit), this decade was 0.2 degrees Celsius (0.36 degrees Fahrenheit) warmer than any previous decade. The year 2005 was the hottest on record, while 2007 and 2009 tied for second hottest. In fact, 9 of the 10 warmest years ...


    By Earth Policy Institute

  • 2012, a year of record-breaking extreme weather and climate

    The United States experienced its hottest year on record in 2012. On a global scale, not only did last year mark the 36th consecutive year the annual global temperature was above average, but each successive decade in the last 50 years has been the warmest on record. Additionally, the recent draft National Climate Assessment states that it is “virtually certain” that global ...

  • Use of Eight Well Purging and Sampling Record

    This article describes a groundwater well purging and sampling form that can be downloaded at our website. A click on the articles button will take you to a list of Monitoring Tips and Procedures articles, one of which is the sampling form. The form can be used to record  indicator parameters pH, conductivity, temperature, etc., taken during ...


    By RotaPump, Inc

  • Recording Road Surfacing Data to Prove Process Efficiency

    CAS DataLoggers Saves on Costs with an All-in-One System CAS DataLoggers recently provided the comprehensive data logging solution for a company owning several bitumen spray trucks used to seal roads and highways. Management wanted to demonstrate the quality and efficiency of their process to customers by recording the specific information regarding their ...


    By CAS DATALOGGERS

  • CTXL SUPERECORDER Takes Circular Chart Recording to the Nest Level

    Chart recorders are a familiar sight in manufacturing plants, where they track such variables as temperature, pressure, flow, pH, and humidity. Laboratories, meanwhile, use them to monitor scientific and engineering data generated in testing, diagnostics, statistical analysis, and other work requiring a graphic record. Omega Engineering has long been a force in chart recording, and with the ...


    By Omega Engineering Ltd.

  • What is Temperature Mapping and Validation Study Service : UAE

    What is Temperature Mapping and validation In this video we are trying to explain what is temperature mapping and validation study for ware houses, cold rooms, chiller rooms, refrigerators, reefer, freezers, vehicles etc. Also we explain the procedures for carrying out the same. Vacker Group carries out Temperature Mapping and Validation Study across all Middle ...


    By Vacker LLC

  • Mercury free solutions for autoclave temperature monitoring

    Mercury is a naturally occurring element found in the air, water and soil however exposure to the substance, even in small amounts, can lead to severe health and ecosystem issues. Mercury in products can find it’s way into the environment in all sorts of ways such as manufacturing, spills, recycling and disposal. Due to the health risks posed products such ...


    By Camlab Limited

  • 5 Reasons to Use WiFi Temperature/Humidity Monitoring

    Low-Cost Wireless Data Loggers Protect Your Inventory As wireless monitoring and alarming is becoming even more widespread and affordable, many supply and cold chain companies are turning to WiFi-capable devices to monitor their inventories for temperature and humidity. Now CAS DataLoggers can help you save on costs and time ...


    By CAS DATALOGGERS

  • Determining Concrete Maturity Using Temperature Data Loggers

    CAS DataLoggers has provided the temperature monitoring devices for a construction contractor which needed to monitor and record the cure of structural concrete onsite. Once workers could prove that the concrete was strong enough, they could then proceed with new construction. The company was on a tight ...


    By CAS DATALOGGERS

  • Precise Temperature Control assures High Quality Steel

    Process monitoring during continuous casting using special ratio-pyrometers and thermal imagers from LumaSense Today’s increasing quality standards and higher energy costs demand more accurate and consistent temperature control in every step of the steel making process. Steel manufacturing consists of high temperature manufacturing steps that use significant amounts of energy. Processes ...


    By LumaSense Technologies, Inc.

  • Differential Pressure and Temperature Monitoring in a Hospital Cleanroom

    Accsense A1-01a Wireless Environmental Data Loggers CHESTERLAND OH—April 9, 2012 CAS DataLoggers recently provided the wireless pressure and temperature monitoring solution for a hospital maintaining a surgery cleanroom to protect patients from a variety of environmental contaminants. Staff entered and exited through airlocks and were required to wear cleanroom suits before entering. Air ...


    By CAS DATALOGGERS

  • Early warning system to forecast maximum temperature in drinking water distribution systems

    Climate change poses new challenges in preventing the exceedance of the maximum allowed temperature in the drinking water distribution system (DWDS). The objective of this article is to evaluate the feasibility of forecasting the maximum temperature in the DWDS. Two options were analysed: (1) using the records of the last day as forecast for the coming 2 days and (2) using 2-day weather forecast ...


    By IWA Publishing

  • Analysis of Organophosphorus and Organonitrogen herbicides in water using GC/MS with selected ion recording

    Laboratories monitoring trace level pesticides and herbicides by gas chromatography/mass spectrometry (GC/MS) frequently utilize Selected Ion Recording (SIR) techniques to maximize analytical sensitivity for quantification. With analytical standards, precision is limited to a large extent only by the autosampler and other instrumental effects. However, real-world samples pose a greater challenge. ...


    By PerkinElmer, Inc.

  • Inno-badge – an electronic dosimeter badge for continuous recording of a worker`s exposure to Phosgene gas

    Untitled Document Phosgene, also known as Carbonyl Chloride, is a widely used but highly toxic substance. At room temperature Phosgene gas is nearly colourless, and at low concentrations ...


    By Baum Publications Ltd.

  • Determination of VOCs in water using static headspace GC/MS with simultaneous full scan and selective ion recording

    The combination of static headspace sample introduction and gas chromatography/mass spectrometry (HS/GC/MS) provides the analyst with a powerful, fully automated technique for the determination of trace volatile organic compounds (VOCs) in water. Samples may be hermetically sealed in the headspace vial at the point of sampling. This approach avoids errors due to glassware cross-contamination and ...


    By PerkinElmer, Inc.

  • Effect of microwave and hot air drying on flax straw at controlled temperatures

    Flax stems were subjected to microwave drying at controlled temperatures. The rate of drying was then compared with conventional hot air drying. The product temperature was maintained at 40°C, 60°C and 80°C for both microwave and hot air drying. The moisture content of flax stem was about 70% (wet basis). The microwave drying was conducted in a microwave apparatus which recorded mass, ...


    By Inderscience Publishers

  • Pilot scale studies on nitritation-anammox process for mainstream wastewater at low temperature

    Process of partial nitritation-anammox for mainstream wastewater at low temperature was run in a pilot scale moving bed biofilm reactor (MBBR) system for about 300 days. The biofilm history in the reactor was about 3 years of growth at low temperature (down to 10 °C). The goal of the studies presented in this paper was to achieve effective partial nitritation-anammox process. Influence of ...


    By IWA Publishing

  • Do you need to monitor temperature and humidity in controlled environments?

    Look no further. This compact and easy-to-use instrument is ideal for constant monitoring of temperature and humidity measurements in environments where a record of data for traceability is required. It is ideal for use in medical product storage facilities, warehousing and distribution, containers, industrial processes, laboratory environments, museums, and classrooms. With a ...


    By ATP Instrumentation Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you