thermal desorption plant Articles

  • Thermal Desorption - A Viable Solution

    Untitled Document As regulations continue to tighten, the need for expedient and accurate remediation technology is of great importance. When faced with the demand or need to reach ...


  • VacuDry Indirect heated vacuum thermal Desorption by econ industries - case study

    With the VacuDry8 technology the energy-efficient treatment of hazardous and industrial waste as well as contaminated soil, oil sludge and secondary raw material is realized. Controlled vacuum and heat are used to separate minerals from oil, solvents, mercury and other hazardous substances.    At the core of the econ VacuDry8 process is a specially designed dryer chamber which ...


    By econ industries GmbH

  • In-Situ thermal treatment of MGP waste and creosote

    Abstract: Remediation of coal tar at former Manufactured Gas Plant (MGP) sites, and creosote associated with wood preservative sites is challenging due to the viscous nature of the dense non-aqueous phase liquid (DNAPL) and the modest solubility and vapor pressure of the contaminants of concern (COCs). DNAPL seepage into surface water bodies, as well as groundwater plumes formed by the most ...


    By TerraTherm, Inc.

  • A Pilot Study of Mercury Liberation and Capture from Coal-Fired Power Plant Fly Ash

    The coal-fired electric utility generation industry has been identified as the largest anthropogenic source of mercury (Hg) emissions in the United States. One of the promising techniques for Hg removal from flue gas is activated carbon injection (ACI). The aim of ...

  • Mass balance and mass loading of polybrominated diphenyl ethers (PBDEs) in a tertiary wastewater treatment plant using SBSE-TD-GC/MS

    A mass loading and mass balance analysis was performed on selected polybromodiphenyl ethers (PBDEs) in the first full-scale indirect potable reuse treatment plant in the United States. Chemical analysis of PBDEs was performed using an environmentally friendly sample preparation technique, called stir-bar sorptive extraction (SBSE), coupled with thermal desorption and gas chromatography/mass ...


    By IWA Publishing

  • Case Study: Contract Title - WES

    Contract Location: Safat, Kuwait Contract Start Date: July 2005 Contract Finish Date: November 2005 Manufacturing Complete and Plant Shipped Quantity Treated (m3): In excess of 75,000 tons Treatment Method: Thermal Desorption Rate of Treatment (m3/hr): 3.5 tons per hour Working Hours per Day: 24 Working Days per Week: 5.5 Project Description: ...


    By RLC Technologies, Inc.

  • Oil and metal recovery from mill scale and grinding swarf for the metal industry - case study

    A combination of rising prices for resources and the improvement in technology make treatment of mill scale and grinding swarf an extremely environmentally friendly and economical solution. The first VacuDry® plant for the recovery of oil solvents and metals from sludges began operating in autumn 2012. Our client is a medium-sized company operating in the field of waste recycling and ...


    By econ industries GmbH

  • Mercury recovery from industrial waste and toxic residues of natural gas drilling

    econ's client in the east of Germany is one of the few specialised companies in Europe for the treatment of mercury contaminated waste. Typical input material for this type of treatment is sludge from the natural gas industry or other residues from chemical processes, i.e. contaminated filter cake from waste water treat-ment. Among their most important clients are Shell, ExxonMobil, Wintershall ...


    By econ industries GmbH

  • Case Study: Contract Title - PCI

    Contract Location: East Chicago, IN Contract Start Date: 2/16/2004 Contract Finish Date: 10/14/2004 Quantity Treated (m3): Hazardous Materials, Industrial Wastes Treatment Method: Thermal Desorption Rate of Treatment (m3/hr): 1.5 to 2.5 tons per hour Working Hours per Day: 24 Working Days per Week: 6 Project Description: RLC Technologies ...


    By RLC Technologies, Inc.

  • Case Study: Contract Title - PSC

    Contract Location: Norco, Louisiana Contract Start Date: 9/3/2008 Contract Finish Date: 10/14/2009 Quantity Treated (m3): >35,000 tons Treatment Method: Thermal Desorption Rate of Treatment (m3/hr): 2.5 to 3.5 tons per hour Working Hours per Day: 24 Working Days per Week: 5 Project Description: RLC Technologies was contracted by PSC to ...


    By RLC Technologies, Inc.

  • Remediation of hydrocarbon contaminants from oil lagoons and refinery waste - case study

    In 2007 econ delivered an indirectly heated thermal desorption plant to a client in Kuwait. The plant is de-signed to treat various types of waste with hydrocarbon contaminant content. In particular refinery waste, oil lagoons and down hole drilling waste. The aim is to recover the waste hydrocarbons from the soil/sand and remediate the lagoons of their contaminants.  Due to the natural ...


    By econ industries GmbH

  • Drilling oil recovery from drill cuttings case study

    By econ industries VacuDry indirect heated thermal desorption Drill cuttings are an increasing waste stream worldwide, econ industries addressed the challenge by developing a process that cleans the waste and at the same time recovers valuable drilling oil. The VacuDry plant started the successful processing of drill cuttings in autumn 2013. Our client, a medium-sized recycling company, was new ...


    By econ industries GmbH

  • One of Europe’s most contaminated sites

    VSD Avenue, a joint venture partnership between VolkerStevin, DEC and Sita Remediation, started work at the beginning of September on the remediation of the former Avenue Coking Works in Chesterfield; one of the most heavily contaminated sites in Europe. Guy Pomphrey, chairman of VSD Avenue, explains The £82m contract, signed in July, was commissioned by the client and site owner the East ...


    By Newzeye Ltd

  • Centralised treatment of oil sludge and other industrial waste

    Centralised treatment of various sources of industrial waste has been established in many European countries over the last decade. Many facilities are still equipped with non state of the art technology and therefore cannot fulfil the broad field of applications with regard to industrial waste remediation. econ's international client decided to be one step ahead and erected a new econ industries ...


    By econ industries GmbH

  • Centralised treatment of oil sludge and other industrial waste - case study

    Centralised treatment of various sources of industrial waste has been established in many European countries over the last decade. Many facilities are still equipped with non state of the art technology and therefore cannot fulfil the broad field of applications with regard to industrial waste remediation, econ's international client decided to be one step ahead and erected a new econ industries ...


    By econ industries GmbH

  • Genotoxicity & Environmental Pollution

     The Comet assay is playing an increasing role in studies to determine possible links between environmental pollutants and DNA integrity. The assay is an ideal biomarker for such investigations due to its sensitivity and reliability in detecting DNA damage and repair. Many research groups use our Comet ...


    By Perceptive Instruments Ltd.

  • A Dynamic Site Investigation: Adaptive Sampling and Analysis Program for Operable Unit 1 at Hanscom Air Force Base, Bedford, Massachusetts

     Abstract In this study, field analytical instrumentation and methods were used to support a risk assessment study at the airfield at Hanscom Air Force Base (HAFB, Bedford, Massachusetts). The site investigation is part of an ongoing effort to determine contaminant risk to ground water from soil. The field tools supported a dynamic workplan/adaptive sampling and analysis demonstration. Over ...

  • Case study - Engine test cell exhaust: RTO

    Overview A Mid-western outboard engine manufacturer bought a three year-old plant for the production of its marine engines. When finished, the engines are removed from the assembly line and run for quality control. The 25,000 SCFM of exhaust from testing contains volatile organic compounds (VOCs) that require regulatory compliance. Also within this exhaust is a great deal ...

  • Case study - Engine cell exhaust: RTO

    Problem A Mid-western outboard engine manufacturer bought a three year-old plant for the production of its marine engines. When finished the engines are removed from the assembly line and run for quality control. The 25,000 SCFM of exhaust from testing contains volatile organic compounds (VOCs) that require regulatory compliance. Also, within this exhaust is a great deal of water vapor ...

  • Case study - Increasing oxidizer capacity by 80,000 SCFM

    Overview A recreational products company bought a three year-old manufacturing facility with an existing regenerative thermal oxidizer (RTO) for the production of their outboard engine. They required emission control equipment to manage the volatile organic compounds (VOCs) emitted by the solvents used in the engine painting processes. The company wanted to minimize overall costs by using ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you