thermal fluid boiler Articles

  • 10 ton CFB Power Plant Boiler

    This type of boilers is very popular in recent years. ...


    By ZGZhengzhou boiler

  • Chemical recovery - Recycle Fluid Technologies, Inc. - case study

    Application Recycle Fluid Technologies, Inc., of Richland Michigan recovers ethylene glycol of higher purity and greater volumetric yield. The recovered product must meet stringent General Motors and ASTM Standards. Waste Description The used ethylene glycol contains inhibitor salts, ash, dissolved metals, organic acids, motor oils and other variable ...


  • Thermal oxidizers for natural gas savings - Case Study

    It’s in the news every day; the natural gas production industry is experiencing record growth. The gas reserves in the United States are thought to hold enough natural gas for hundreds of years and the gas and oil industry has improved extraction techniques that make gas production more affordable and less impactful on the landscape. Good news for the country and our environment. The ...

  • Case study - fuel-free power from solar thermal

    Middle East Technical University Campus, North Cyprus, Turkey Application Type: Solar Thermal Nominal Power Output: 18kW Thermal Heat Input: 200 - 400kW Hot Water Input Range: 170 - 225°F Hot Water Flow: 185 GPM Cold Water Input: 80-100°F Cold Water Flow: 220 GPM Date Commissioned: Q4 2010 Middle East Technical University Northern Cyprus Campus ...


    By ElectraTherm

  • Co-firing Solid Recovered Fuels (SRFs) with brown coal in large-scale pulverised fuel power plants – a simulation approach

    The results of the numerical simulations performed in a pulverised fuel boiler co-firing coal and Solid Recovered Fuels (SRFs) are presented. SRFs are initially modelled as a mixture of two different fractions (biogenic and plastic) and further simplifications are proposed to save computational expenses. The SRF submodels are validated with available data obtained from a laboratory-scale ...


    By Inderscience Publishers

  • ElectraTherm Green Machine generates power from biomass in Italy - Case Study

    Site: Badia Prataglia, Italy Gross Power Output Avg: 46kWe Hot Water Input Range: 110°C Hot Water Flow: 10 l/s Thermal Input to the Green Machine (kW thermal): 500kWt ElectraTherm commissioned a Green Machine to generate emission-free electricity from biomass in Badia Prataglia, Italy. The facility operates a biomass boiler burning a mix of sawdust and ground up waste wood from ...


    By ElectraTherm

  • The design of static mixer heat transfer equipment for adhesives, sealants, resins and polymers.

    The fluids handled within the adhesives and sealant industries are amongst the most difficult to handle of any in the main process industries globally. The characteristics which make them particularly difficult to handle include: High viscosities (typically 1-2000 Pa.s, or 1000 to 2 million cP). Often non-Newtonian (viscosity is not constant and varies with shear rate). Some ...


    By National Oilwell Varco

  • Pumps for synthetic heat-transfer liquids

    As soon as the temperature in a heat-transfer system becomes too high for water, a plant operator must choose between petroleum-based or synthetic oils as the heat-transfer liquid. When modern petroleum oils are used, systems with feed temperatures up to about 300 °C can stay in service for their entire service life with one filling and with virtually no maintenance. Once feed temperatures ...


    By ALLWEILER GmbH

  • The twin cities sludge-to-energy plant reduces greenhouse gas emissions

    ABSTRACTThe majority of Utilities and Agencies in the United States (U.S.) that incinerate sludge treat this practice as a disposal method and do not maximize the recovery of energy available in the sludge and hence, do not contribute to the reduction in greenhouse gas (GHG) emissions.  The Metropolitan Council Environmental Services (MCES) have used incineration at the Metro Wastewater ...

  • Springfield MA case study

    At Their Disposal Komline-Sanderson minimizes solid waste disposal costs in Springfield, Mass The City of Springfield, Mass., currently uses a contract composting facility, which is located at the 65 MGD Bondi Island Wastewater Treatment Plant to dispose of their solid waste. The composting facility requires a feed of 40–45% solid materials to ...


    By Komline-Sanderson

  • Vattenfall`s Cogeneration Power Plant Reuter West - Case Study

    The cogeneration power plant “Reuter West” was erected as a base load power plant in the vicinity of the existing “Reuter” plant. The two hard coal fired 300 MW units D and E were commissioned in 1987 and 1989. Today the cogeneration units supplying electricity and thermal energy are operated by Vattenfall Europe GmbH. The heart of each power plant is the boiler where the ...

  • Case study - Air-to-water heat exchanger reduces operating costs by $120,000 per year

    OVERVIEW This pharmaceutical company had a 5,000 SCFM oxidizer that they were looking to relocate to another facility across the United States.  The destruction rate efficiency and heat recovery expectation at the new location differed from the original design conditions at the current facility. ACTION An Anguil field service engineer went to ...

  • Case study - Oxidizer energy recovery options

    Overview The mainstream media today is full of allusions to energy awareness and conservation. Just as visible these days are media references to astronomical dollar figures that can boggle the mind. This article does not seek to break out of that mold, but rather to conform to it – as Oxidizer Stack Heat Recovery offers a tremendous opportunity for both energy conservation and ...

  • European Oil and Gas from Exploration to End User

    Made up of a team of senior specialists dedicated to innovation and dependability in the field of combustion technology; CS Combustion Solutions' (CS) staff use their 25 years of expertise in engineering, supplying and commissioning of vertical and horizontal combustors for a wide range of applications to find the best results for each individual requirement. "We are a company that specialises in ...

  • Paragould AR case study

    Maximum Capacity Expected Increased population in Paragould, Ark., forces city to expand wastewater treatment plant to better manage sludge disposal Does this sound familiar? Your lagoon is filling with both primary and secondary sludge, and will be at capacity within the next two years. Paragould, Ark., a growing city of 22,500 located in northeast Arkansas, had just that problem. ...


    By Komline-Sanderson

  • Full steam ahead

    RemedX managing director Richard Croft explains why thermal remediation techniques are good value even at a time of recession. In-situ thermal treatments of soils are usually applied in conjunction with other technologies. The process involves heating contaminated soils, rock and groundwater to exploit resulting physical and chemical effects on the contaminants present. To understand the ...


    By Newzeye Ltd

  • Case study - Green Machine uses biomass to put power back on the grid

    St. Helena Island, South Carolina Gross Power Output: up to 43kWe Thermal Heat Input: 200 - 500kWt Hot Water Input Range: 160 - 235°F Hot Water Flow: 150 GPM     Cold Water Input: 68°F Cold Water Flow: 150 GPM In fall 2010, American Capital Resources Company installed ElectraTherm’s heat-to-power Green Machine, for generating power from ...


    By ElectraTherm

  • How to Optimize Oxidation Systems for Efficient Operation

    Emphasis on air management within converting-process dryers and ovens is critical to the design of pollution-control systems for treating exhausts containing VOCs (volatile organic compounds). Efficient air management allows the pollution-control system to be optimally sized to meet the needs of the process. Good process control further defines the emission stream by avoiding the need for large ...


    By Babcock & Wilcox MEGTEC

  • Electronic water treatment reduces fouling in heat exchangers

    The deposition of material on heat transfer surfaces is called fouling which significantly impacts on the thermal and mechanical performance of heat exchangers. Fouling increases the overall thermal resistance and lowers the overall heat transfer coefficient of heat exchangers as well as impeding fluid flow, accelerating corrosion and increasing pressure drop across the heat ...

  • Utilizing unconventional water sources for industrial reuse

    Reclamation and reuse of unconventional wastewater sources for plant raw water, cooling water and process pre-treatment has increased substantially due to increases in the cost of drinking water, recurring water shortages that can impact business operations, and tightening government regulation. Water is required in almost every industrial sector for the processing and manufacture of products. ...


    By WesTech Engineering, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you