thermal off-gas Articles

  • Thermal Oxidiser - Scottish Leather Group - Case Study

    Project Details Customer Name: Scottish Leather Group The Brief:  Scottish Leather were sending 30, 000 tonnes of waste to landfill each year. Turn that waste into heat and steam for processing leather and heating water Location of Installation: Bridge of Weir, ...


    By Process Combustion Ltd

  • Minute Flow Tip Video - Mass Flow Versus Volumetric Flow Technology

    When engineers and systems integrators need to measure gas flow rate in an industrial process or scientific research, there are many types of technologies to choose from.  This makes selecting the right gas flow meter a challenge. In addition to technology, engineers must consider many other parameters: price for value, cost of ownership, size of footprint, ...


    By Sierra Instruments, Inc.

  • Why Are CHP Closing All Over The World?

    Burning of coal nowadays has become a big problem. The main reason for this is a rapid increase of mankind. So, China burns half of coal in the world. Since 2000 the share of coal in world energy production has increased from 25 to 30%, and the Chinese economy is responsible for 82% of this growth. In Beijing, it is customary to use ...


    By Lumex Instruments Group

  • A Faster and Better FluidScan with Version 5

    Measure water contamination in turbine oils down to 300 ppm The latest version of FluidScan software can detect total water presence as low as 300 ppm in turbine oils.  The method provides an alternative to laboratory tests such as Karl Fischer titration when fast, simple, and reagent-free analysis is needed. In addition to measuring water contamination, the FluidScan ...


    By Spectro Scientific

  • Air Emissions/Off-Gas Treatment

    A number of technologies have been widely applied for removal of VOCs from off-gas streams. However, the application of these technologies to off-gases from site remediation may be quite limited. Biofiltration has been widely applied for VOC destruction in Europe and Japan, but it has only recently been used in the United States. Catalytic and thermal oxidation are widely used for the destruction ...

  • Optimizing VOC Combustion - Case Study

    Volatile Organic Compounds (VOCs) are pre-cursors to Ozone pollution and subject to EPA regulations. Thermal and catalytic oxidizers are routinely used to destroy VOC emissions from a variety of industrial sources. ...

  • Thermal Oxidizer

    THERMAL OXIDIZER   PRINCIPLE OF COMBUSTION The primary function of the Thermal Oxidizer is to destroy the contaminants in the exhaust coming out of a process.  The operation of the Thermal Oxidizer is based on the principle of combustion.  The process of combustion is the most commonly used method to control emissions of organic compounds. ...


    By Epcon Industrial Systems, LP

  • Thermal Desorption

    Untitled Document Introduction: ...

  • Off-Gas Treatment Technologies for Soil Vapor Extraction Systems: State of the Practice

    Untitled Document EXECUTIVE SUMMARY This document provides state-of-the-practice information on off-gas treatment technologies for soil vapor extraction ...

  • Using Air Strippers for Off-gas Treatment - Case Study

    Two pharmaceutical plants in Puerto Rico used large sequencing batch reactor (SBR) systems to treat their wastewater. The primary treatment was an aerobic bio breakdown of the waste. The were forced to change their treament process because of change in treatment regulations. The new regulations required them to treat off-gas that was coming from the SBRs. They were faced with installing a very ...


    By QED Environmental Systems

  • Thermal Treatment Technologies

    Hot gas decontamination: Hot gas decontamination is a technology still in the pilot-scale of development that can be used for decontamination of explosives-contaminated masonry or metallic structures. The method involves sealing and insulating the structures, heating with hot gas stream to 260 °C (500 °F) for a prescribed period of time, volatilizing the explosive contaminants, and destroying ...

  • The Drumbeat on infrared thermal imaging

    Drumbeat Energy regards infrared (thermal) imaging as an amazingly useful tool in the quest for greater energy efficiency. It has the ability to define non-invasively and with uncanny speed and accuracy where heat is leaking from a building. Never was the expression “A picture paints a thousand words” ...


    By Drumbeat Energy Limited

  • Thermal stress on bottom hole rock of gas drilling

    Gas drilling has higher penetration than mud drilling. The greatest reason for this phenomenon with gas is that the gas is greatly cooled by expansion as it passes through the bit and thereby cools the bottom of the hole. The thermal stress at bottom–hole occurs during this process. The concept of thermal crushing of rocks is analysed in this study. The theoretical methods are developed to ...


    By Inderscience Publishers

  • Thermal Power Gas Turbines Market Analysis to 2020

    RnRMarketResearch.com adds report “Gas Turbines for Thermal Power, 2014 Update – Global Market Size, Average Pricing, Equipment Segmentation and Competitive Landscape Analysis to 2020” to its store.   “Gas Turbines for Thermal Power, 2014 Update Global Market Size, Average Pricing, Equipment Segmentation and Competitive Landscape Analysis ...


  • SOCAVER Thermal Gas Supply - Case Study

    SOCAVER (Société Camerounaise de Verrerie) is a subsidiary of the leading Cameroon brewery, SABC (Société Anonyme des Brasseries du Cameroun). SOCAVER, which is the only glass factory in the Central Africa region, blew its first bottle on 1 July 1970 and today supplies a host of African countries with its products. Specialising in the manufacture of hollow glass, ...


    By Victoria Oil & Gas Plc

  • Hardware Solutions to Monitor Gas and Thermal Energy

    Why Monitor Gas and Thermal Energy? Hang on, are you telling me you are an energy manager that’s only worried about electricity!? Let’s take a step back and realise that gas represents nearly 40% of the total energy consumed in the industrial and service sectors in Europe. That’s almost half, you guys! ...


    By DEXMA

  • Thermal oxidizers for natural gas savings - Case Study

    It’s in the news every day; the natural gas production industry is experiencing record growth. The gas reserves in the United States are thought to hold enough natural gas for hundreds of years and the gas and oil industry has improved extraction techniques that make gas production more affordable and less impactful on the landscape. Good news for the country and our environment. The ...

  • Regenerative Thermal Oxidizers for Midstream Industry

    Midstream Company Epcon has extensive experience in designing and building Regenerative Thermal Oxidizers (RTO's) for the Midstream Industry. The Problem A leading Midstream company needed equipment to achieve higher DRE and treat the H2S (sour gas) from their process. The company went out seeking the technical solutions and went to several ...


    By Epcon Industrial Systems, LP

  • Thermal deoilers - Thermal deoiling of evaporator coils for air conditioners

    The Problem A major Air Conditioning company was mandated to have an alternate technology for degreasing evaporator fins. They had, until recently, been deoiling metal parts in a conveyorized solvent based vapor degreasing line, but the state environmental agency mandated that the line be shut down on a certain date due to the excessive water and air pollution it generated. The company ...


    By Epcon Industrial Systems, LP

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you