thermal oxidizer Articles

  • Thermal Oxidizer

    THERMAL OXIDIZER   PRINCIPLE OF COMBUSTION The primary function of the Thermal Oxidizer is to destroy the contaminants in the exhaust coming out of a process.  The operation of the Thermal Oxidizer is based on the principle of combustion.  The process of combustion is the most commonly used method to control emissions of organic compounds. ...


    By Epcon Industrial Systems, LP

  • Regenerative Thermal Oxidizer

    PRINCIPLES OF COMBUSTIONThermal oxidation technology has proven to be industry choice for destroying Volatile Organic Compounds (VOCs). The process of combustion is the most commonly used method to control emission of organic compounds.  Combustion type systems are always simple systems capable of having very high destruction efficiency.  ...


    By Epcon Industrial Systems, LP

  • A Pyrocleaning Furnace and Thermal Oxidizer System

    Abstract A Pyrocleaning Furnace and Thermal Oxidizer System which degreases metal components and comprises an oven, an oxidizer, a system gas supply means, a system gas exhaust means, and a first heat exchanger. The degreasing is accomplished by first transporting the metal components through the oven and exposing the oil coated metal components to hot gases which have a temperature above ...


    By Epcon Industrial Systems, LP

  • Thermal oxidizer: Major engineering company

    The Problem A Major Engineering Company approached Epcon for a large Oxidizer System with 25,000 - 35,000 SCFM Afterburner for their Continuous Cord Resin-Impregnating manufacturing plant. The engineering company had no idea about the operating costs and they were primarily concerned with working through a lawyer that was representing this company with the State Agency. This particular ...


    By Epcon Industrial Systems, LP

  • Recuperative Thermal Oxidizers for Coffee Roasting

    Coffee Roasting Company Epcon has extensive experience in designing and building Recuperative Thermal Oxidizers for the Coffee Roasting Industry. The Problem A leader in the Coffee Industry needed equipment to control odor and eliminate VOC's from Coffee Roasting. The company went out seeking the technical solutions and went to several manufacturers to ...


    By Epcon Industrial Systems, LP

  • Tank cleaning - Regenerative thermal oxidizer

    Three Canister RTO for Tank Car Loading and Unloading Terminal Epcon is proud to share its case study for the Tank Truck Loading Terminal. The Problem Loading and Unloading Tank Trucks: When the Tank Trucks are unloaded, it causes a lot of vapor to be released to atmosphere. These emissions have to be controlled and can not be released to atmosphere. ...


    By Epcon Industrial Systems, LP

  • Regenerative Thermal Oxidizers for Midstream Industry

    Midstream Company Epcon has extensive experience in designing and building Regenerative Thermal Oxidizers (RTO's) for the Midstream Industry. The Problem A leading Midstream company needed equipment to achieve higher DRE and treat the H2S (sour gas) from their process. The company went out seeking the technical solutions and went to several ...


    By Epcon Industrial Systems, LP

  • Thermal Oxidation Of Select Compounds In Air

    Field tests were conducted thermal oxidizers to determine destruction and removal efficiencies (DRE) for benzene, trichlorofluoromethane, chloroform, methyl ethyl ketone, and carbon tetrachloride. ...

  • A Comprehensive Review Of Regenerative Thermal Oxidizers

    Within industry today, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new. In response to Congressional guidelines passed in the 1970’s, a number of companies with VOC emissions have been operating air pollution control systems of one type or another for 25 years or more. These guidelines have been revised and added to as the years progressed, making it ...


    By The CMM Group, LLC

  • Regenerative thermal oxidizer - Wastewater treatment facility

    Epcon has extensive experience in designing and building Air Pollution Control Systems for the Wastewater Treatment Industry. The Problem The water treatment plant could no longer have open storage tanks to store industrial wastewater from the refineries in the area. They were emitting VOC's from their open storage tanks and were required to reduce their VOC emissions by ...


    By Epcon Industrial Systems, LP

  • Regenerative Thermal Oxidizers…What You Should Know.

    Within industry today, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new.  In response to Congressional guidelines passed in the 1970’s, a number of companies with VOC emissions have been operating air pollution control systems of one type or another for 25 years or more.  These guidelines have been revised and added to as the years ...


    By The CMM Group, LLC

  • On the thermal oxidation stability of pyrolysis biomass oil

    The rice husk-based biomass-oil is composed of complex organic compounds and water, and its oxidation stability has a direct influence on its physico-chemical property and application. The advanced oxidation experiments were carried out through the flowing of air and oxygen respectively. The influences of four factors, including gas flux, oxidation time, temperature and copper foil, on the ...


    By Inderscience Publishers

  • Achieving Air Pollution Control With Catalytic Or Thermal Oxidizers

    As the full effect of the Federal Clean Air Act (CAA) Amendments passed by Congress in 1990 continue to impact today's industry, many manufacturing operations have become subject to stricter local, State and Federal clean air regulations. Both VOC (volatile organic compound) and HAP (hazardous air pollutant) emissions are strictly regulated since they lead to the formation of ground level ozone ...


    By The CMM Group, LLC

  • Achieving Air Pollution Control with Catalytic or Thermal Oxidizers

    As the full effect of 1990’s Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many manufacturing operations have become subject to stricter local, state and federal clean air regulations. Both VOC (volatile organic compound) and HAP (hazardous air pollutant) emissions are strictly regulated since they lead to the formation of ground-level ozone (or smog). The CAA ...


    By The CMM Group, LLC

  • Regenerative Thermal Oxidizer Installation #1072 - Case Study

    Solar Panel Manufacturer in Hillsboro, OR A solar panel manufacturer adds pollution control with the help of Alliance Corporation. Application:  Solar – Hillsboro, OR Project: A 6,000 SCFM KRONUS™ Regenerative Thermal Oxidizer. Installed by ...


    By Alliance Corporation

  • Regenerative Thermal Oxidizer Installation #1005 - Case Study

    Defense Contractor located in El Segundo, CA A Defense Contractor updates their pollution control with the help of Alliance Corporation. Application: Semiconductor – El Segundo, CA Project: An 8,000 SCFM TRITON™ Regenerative Thermal Oxidizer. Installed by ...


    By Alliance Corporation

  • Regenerative Thermal Oxidizer Installation #1329 - Case Study

    Protective Film Manufacturer in Moorsetown, NJ An automotive protective film manufacturer replaces pollution control with the help of Alliance Corporation. Application: Converting – Moorestown, NJ Project: A 35,000 SCFM KRONUS™ Regenerative Thermal Oxidizer (RTO). Installed by ...


    By Alliance Corporation

  • Regenerative Thermal Oxidizer Installation #1352 - Case Study

    A Defense Contract Manufacturer Updates Pollution Control System in El Segundo, CA A defense contractor manufacturer replaces existing recuperative thermal oxidizer with new Regenerative Thermal Oxidizer with the help of Alliance Corporation. Application: Aerospace – El Segundo, California Project: A 12,000 SCFM KRONUS™ Regenerative ...


    By Alliance Corporation

  • Regenerative Thermal Oxidizer Installation #1369 - Case Study

    Acoustical Insulation Manufacturer in Holliston, MA An Acoustical Insulation Manufacturer adds pollution control with the help of Alliance Corporation. Application: Coating – Holliston, MA Project: A 6,000 SCFM KRONUS™ Regenerative Thermal Oxidizer. Installed by ...


    By Alliance Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you