thermal oxidizer system Articles

  • Thermal Oxidizer

    THERMAL OXIDIZER   PRINCIPLE OF COMBUSTION The primary function of the Thermal Oxidizer is to destroy the contaminants in the exhaust coming out of a process.  The operation of the Thermal Oxidizer is based on the principle of combustion.  The process of combustion is the most commonly used method to control emissions of organic compounds. ...


    By Epcon Industrial Systems, LP

  • Recuperative Thermal Oxidizers for Coffee Roasting

    Coffee Roasting Company Epcon has extensive experience in designing and building Recuperative Thermal Oxidizers for the Coffee Roasting Industry. The Problem A leader in the Coffee Industry needed equipment to control odor and eliminate VOC's from Coffee Roasting. The company went out seeking the technical solutions and went to several manufacturers to ...


    By Epcon Industrial Systems, LP

  • Metal Coating Emission Control

    The use of regenerative thermal oxidizers is expanding into applications where they wouldn’t have been considered years ago, says Mike Scholz As the first generation of oxidizer systems in the industry nears the end of their service life, many canmaking plants face repair or replacement of their existing air pollution control systems. Like many others in the industry, a Silgan canmaking ...

  • Case study - RTO handles high VOC loading at silgan containers

    OVERVIEW Regeneration Game - Originally printed in The Canmaker Magazine - Sayers Publishing Group As the first generation of oxidizer systems in the industry nears the end of their service life, many canmaking plants face repair or replacement of their existing air pollution control systems. Like many others in the industry, a Silgan canmaking plant in the ...

  • Medical implant manufacturer succeeds with the QUADRANT SRS Silicone Series Thermal OXidizer - Case study

    Medical Implant Manufacturer Succeeds with Customized Air Pollution Control Equipment Many industries utilize silicone as an ingredient in their manufactured product. Silicone enhances the attributes of the product or helps to improve production characteristics. Whatever the reason may be, users of solvent borne silicone's all face very troubling issues when it comes to the selection of the right ...

  • Case study: Regenerative thermal oxidizers for coffee roasting

    Epcon has extensive experience in designing and building Regenerative Thermal Oxidizers (RTO's) for the Coffee Roasting Industry. The Problem A leader in the Coffee Industry needed equipment to control odor and eliminate VOC's from Coffee Roasting. The company went out seeking the technical solutions and went to several manufacturers to locate the best possible technology. ...


    By Epcon Industrial Systems, LP

  • Selecting VOC Oxidizer

    Nacah Tech's President, Bob Keibler presents How to select the proper type of thermal oxidizer or process gas treatment method.  The paper presents details on what parameters of a process gas to be treated determine which treatment method / oxidizer provides the best efficiency, plant flexibility, heat recovery method, etc. while maintaining the target emission rates. Begining ...


    By Nacah Tech LLC

  • Case study - Plastic components painting

    Overview A plastic injection molding company in Wisconsin is known as a world-class leader in the industry for their secondary decorating and assembly capabilities. One of their eleven facilities not only performs plastic injection molding but also provides the organization with decorating capabilities such as painting, laser etching, laser marking, pad printing and assembly of ...

  • Regenerative Thermal Oxidizer

    PRINCIPLES OF COMBUSTIONThermal oxidation technology has proven to be industry choice for destroying Volatile Organic Compounds (VOCs). The process of combustion is the most commonly used method to control emission of organic compounds.  Combustion type systems are always simple systems capable of having very high destruction efficiency.  ...


    By Epcon Industrial Systems, LP

  • Case study - Kiln emission control technologies

    Overview A specialty ceramic material manufacturer in the United States operates several custom-built furnaces in their manufacturing process.  Sometimes referred to as kilns, these high-temperature process devices are generally a major source of air pollutants and require an abatement technology to meet environmental regulations with the state or federal agencies.  As is the ...

  • Case Study - Coil coating

    Location: Ohio Equipment: Regenerative Thermal Oxidizer 30,000 scfm capacity (1997 vintage) Problem: Established Company Looking for Economical Replacement  Oxidizer with increased capacity and lower operating costs ...


    By Kono Kogs, Inc.

  • Overview of Emission Control Technologies

    Chapter 8. Emission Control Technology 8.4 Thermal Oxidation 8.4.1 INTRODUCTION The objective of this section is to present various VOC thermal oxidation technologies, their strength and weaknesses and the elements required to determine what is the preferred technology for a given application. In 1970 the environmental authorities started to identify various industries which had ...

  • Thermal deoilers - Thermal deoiling of evaporator coils for air conditioners

    The Problem A major Air Conditioning company was mandated to have an alternate technology for degreasing evaporator fins. They had, until recently, been deoiling metal parts in a conveyorized solvent based vapor degreasing line, but the state environmental agency mandated that the line be shut down on a certain date due to the excessive water and air pollution it generated. The company ...


    By Epcon Industrial Systems, LP

  • The Importance of high-quality service for regenerative thermal oxidizer

    The Importance of high-quality service for Regenerative Thermal Oxidizer. Safety, efficiency and compliance among pressures facing Regenerative Thermal Oxidizer operators. As any plant or maintenance manager working in a manufacturing environment using volatile organic compounds (VOCs) could tell you, the standards for support of all equipment along the process is critical for safety and ...

  • Regenerative Thermal Oxidizers for Midstream Industry

    Midstream Company Epcon has extensive experience in designing and building Regenerative Thermal Oxidizers (RTO's) for the Midstream Industry. The Problem A leading Midstream company needed equipment to achieve higher DRE and treat the H2S (sour gas) from their process. The company went out seeking the technical solutions and went to several ...


    By Epcon Industrial Systems, LP

  • Thermal deoilers - Thermal deoiling replaces liquid based degreasing

    The Problem A major Automotive company was mandated to have an alternate technology for degreasing evaporator fins. They had, until recently, been deoiling metal parts in a conveyorized solvent based vapor degreasing line, but the state environmental agency mandated that the line be shut down on a certain date due to the excessive water and air pollution it generated. The company had ...


    By Epcon Industrial Systems, LP

  • Common Treatment Technologies for Halogenated VOCs in Air Emissions/ Off-Gases

    Three technologies that are most commonly used to treat halogenated VOCs in air emissions/off-gases are carbon adsorption, catalytic oxidation, and thermal oxidation. Carbon adsorption is a remediation technology in which pollutants are removed from air by physical adsorption onto the carbon grain. Carbon is 'activated' for this purpose by processing the carbon to create porous particles with a ...

  • Thermal oxidizer - Aluminum / alloy manufacturing company

    Epcon has extensive experience in designing and building Thermal Oxidizers for the Aluminum Industry. The Problem Gas usage kept going up and up over the years on the Thermal Oxidizer. Heat exchanger for hot air supply temperature from the oxidizer was dropping of over the years. Excessive heat loss on exterior components. The ...


    By Epcon Industrial Systems, LP

  • Innovative Solar-Panel Manufacturer Selects Recuperative Catalytic Oxidizer for New Product Line

    Operating Issue A solar-panel manufacturer in California was ready to commercially produce a groundbreaking product that had taken many years to develop. Pollution Systems (PSSI) was initially contacted as a consultant to determine what air pollution control technology was most appropriate for the new product line used in their solar-panel production. PSSI worked closely with the company ...


    By Pollution Systems

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you