thermal water meter Articles

  • How Does a Water Flow Meter Work?

    A flow meter works by measuring the amount of a gas, liquid or steam that passes through or around the flow meter sensors. While flow meter sensors work in many different ways, the end goal is the same: Deliver the most accurate and repeatable flow measurements for the specific application, whether for general research, process control or semiconductor processing. Flow meters measure either mass ...


    By Sierra Instruments, Inc.

  • Wastewater Plant Relies on Thermal Flow Meter for Co-Gen Power Gas Blending Process

    The Rahway Valley Sewerage Authority (RVSA), which operates a large wastewater treatment plant in New Jersey, embarked on a green co-generation waste-to-energy project to power a portion of its operations. The plant performs primary, secondary, tertiary and sludge treatment processes in serving over 250,000 residential customers and 3000 industrial and commercial customers in a 40-plus square ...


    By Modern Pumping Today

  • Thermally Enhanced Soil Vapor Extraction

    Introduction Thermally enhanced SVE is a full-scale technology that uses electrical resistance/electromagnetic/fiber optic/radio frequency heating or hot-air/steam injection to increase the volatilization rate of semi-volatiles and facilitate extraction. Thermally enhanced SVE is normally a short- to medium-term technology. Electrical Resistance Heating Electrical resistance heating uses ...

  • Distributed Thermal-Acoustic Data Integration

    Silixa has developed a technique called Distributed Thermal Acoustics (DTA) to monitor simultaneously the thermal and acoustic profile along a hybrid optical fibre cable in submarine environments. Using its world leading distributed fibre optic technology (ULTIMATM DTS and iDASTM) Silixa deployed an optical fibre cable along the seabed and across the water column in an active gas seepage ...


    By Silixa Ltd

  • Comparison of centrifuge and belt press for compressible digested sludge after thermal hydrolysis

    ABSTRACT Historically it has been shown on many projects that centrifuges can outperform belt presses in dewatering digested sludge. However results from a number of projects where sludge has been treated before digestion with Cambi thermal hydrolysis process (THP) have shown good results for belt press dewatering – generally greater than 30% DS. The authors propose that the main mechanism in ...


    By Cambi Group AS

  • Comparison of centrifuge and belt press for compressible digested sludge after thermal hydrolysis

    Abstract Historically it has been shown on many projects that centrifuges can outperform belt presses in dewatering digested sludge. However, results from a number of projects where sludege has been treated before digestion with Cambi thermal hydrolysis process (THP) hase shown good results for belt press dewatering - generally greater than 30% DS. The authors propose that the main mechanism in ...


    By Cambi Group AS

  • Performance monitoring & troubleshooting with a new individual condenser tube circulating water flow and fouling (ClA/FF) meter - case study

    Introduction Midwest Generation Joliet Station in Illinois has two coal-fired units, Unit 7 and Unit 8. Roth 550 MW units are located on the Des Plaines River and have been in operation since 1963-1964. The circulating water system is a once-through system comprised of a bar rack, traveling screens, circulating water pumps and reversible condensers. The original condenser tubes on Unit ...


    By Intek, Inc.

  • Water Sustainability

    I7.1  | Water Optimization – 30% Groundwater Use Reduction Tabatha Pellerin, Senior Program Manager, AECOM AECOM assisted the Entergy Lewis Creek gas/coal fired electric power plant with water conservation efforts prompted by a goal of 30% ...

  • Efficient Waste Water Treatment

    Clean drinking water is an essential need of mankind. Often surface water like rivers or lakes is used as drinking water source. To prevent these resources from pollution the effective treatment of waste water is a must. For example in China 75% of discharged waste water is coming from pulp and paper, textile and dyeing industries. To run a waste water treatment plant in the most efficient way ...


    By J.V. Niebergall CDH

  • Electronic water treatment reduces fouling in heat exchangers

    The deposition of material on heat transfer surfaces is called fouling which significantly impacts on the thermal and mechanical performance of heat exchangers. Fouling increases the overall thermal resistance and lowers the overall heat transfer coefficient of heat exchangers as well as impeding fluid flow, accelerating corrosion and increasing pressure drop across the heat ...

  • Solar Power Plant Recycles Blowdown Water to Save Fresh Water - Case Study

    PROJECT DETAILS LOCATION Ashalim, Israel CUSTOMER GE-Alstom, Israeli Government SOLUTION Cooling tower wastewater treatment system TECHNOLOGIES Containerized Systems Featuring Automatic Disc Filtration and Ultrafiltration, Brackish Water Reverse Osmosis, Gas Transfer ...


    By Fluence Corporation

  • Acoustiblok® Quiets Well Motor Noise for California Water District

    Acoustiblok recently resolved a noisy well motor issue that was affecting some nearby residents for Three Valleys Municipal Water District (Three Valleys MWD) in California. Ben Peralta, a Three Valleys MWD engineer working on the project said, “The new Acoustiblok All Weather Sound Panels perform better than the old ...


    By Acoustiblok International

  • Case study - Remote water quality monitoring in South Africa

    Situated in the Mpumalanga province of South Africa, the Xstrata Coal South Africa (XCSA) runs several open cut and underground mining operations producing thermal coal. To ensure their mining operations do not affect the surrounding natural water bodies, the company employs Hydrolab and OTT water quality monitoring equipment with remote data transmission options: the OTT ecoLog 800 water level ...


    By The OTT Hydromet Group

  • Temperature and leak monitoring boosts safety and reliability

    Amcor Flexibles Singen GmbH is a manufacturer of printed and unprinted aluminum-based packaging materials and an experienced technical applications specialist. Its plant in Germany, equipped with rolling mills and finishing equipment, turns out approximately 200 million square meters of aluminum foil in various grades every year. High-performance drying equipment is essential for Amcor’s ...


    By ALLWEILER GmbH

  • How to Save with Cooling Tower Credits

    Cooling towers dissipate heat from recirculating water used to cool chillers, air conditioners, or other process equipment to the ambient air. Heat is rejected to the environment from cooling towers through the process of evaporation. Therefore, by design, cooling towers use significant amounts of water. The thermal efficiency and longevity of the cooling tower and equipment depend on the proper ...


    By WaterSignal

  • Guanglian Paper Holdings pollution treatment as a "life project"

    Guanglian Paper Holdings, the last few years continuous investment of 30 billion yuan, to deal with environmental pollution as the enterprise, "life project" task, focusing on the construction of basic facilities. Guanglian Wrapping Paper Holdings from 2002, businesses with great boldness of vision, big ideas, ...


  • Common Treatment Technologies for Nonhalogenated VOCs

    Soil vapor extraction (SVE), thermal desorption, and incineration are the presumptive remedies for Superfund sites with nonhalogenated VOC-contaminated soil. Because a presumptive remedy is a technology that EPA believes, based upon its past experience, generally will be the most appropriate remedy for a specified type of site, the presumptive remedy approach will accelerate site-specific ...

  • GEM provides fast payback for Italcables

    Metered tests carried out on Thermal Energy International’s GEM steam traps by Italcables, Italy’s largest producer of wire strands for pre-stressed concrete and post-tensioned structures, have shown steam savings of up to 30% compared to mechanical traps.  Now, Italcables has fitted GEM traps to its steam baths and kettle boiler used for ‘pickling’ and treating iron ...

  • Heat From Wastewater

    When it comes to using wastewater heat from channels, provision and evaluation of hydraulic and thermal wastewater data is urgently needed prior to planning and implementation of facilities. Knowing the wastewater temperatures as well as the flow rates - particularly as dry weather discharge – is an indispensable component. It is therefore essential to carry out preliminary measurements ...


    By NIVUS GmbH

  • Common Treatment Technologies for Fuels in Soil, Sediment, and Sludge

    Common treatment technologies for fuels in soil, sediment, and sludge include biodegradation, incineration, SVE, and low temperature thermal desorption. Incineration is typically used when chlorinated SVOCs are also present with fuel, and not specified for fuel-only contaminated soil, sediment, or sludge. All types of biodegradation, both in situ or ex situ, can be used to remediate soils: ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you