thickness gauge Articles

  • Monitor Hull Corrosion with Thickness Gauge

    After our recent article about inspecting your hull paint to reduce bio-fouling and acting as an anti-corrosion method, we wanted to delve deeper into one of the biggest problems shipowners and operators face: corrosion. ...


    By Deep Trekker Inc.

  • Fibermesh® 150 Used in Lieu of WWF for George Steinbrenner High School in Tampa, Florida case study

    This high school is a multi-building complex with mostly two story buildings. All buildings were constructed using the tilt-up concrete method. The engineer originally specified various gauge wire mesh based on slab type and thickness. The concrete sub-contractor had a lot of experience and confidence using Propex fibers and submitted alternates for the different types of slabs. The following ...

  • ASME Pressure Vessel Jacket Types

    Across the chemical, oil, and gas processing industries, a variety of ASME Pressure Vessel Jacket Types provide unique benefits for specific processes. R-V provides three jacket types, which benefit the functionality of the vessel. These jackets include: Conventional Vessel Jackets Conventional Jackets are best used on small volume vessels (under 300 gallons) and high-pressure ...


    By R-V Industries, Inc.

  • Feedwater pipe thinning - Case study

    Purpose Advise owners and operators to inspect and test intermediate temperature feedwater piping for internal wall thinning. Problem While not common, pipe wall thinning has been found in areas of turbulent flow in feedwater piping at intermediate temperatures. In at least one case, severe wall thinning to failure occurred downstream of a feedwater chemical ...


    By Dürr Megtec LLC

  • Case study - Ice blast technology for surface decontamination

    Scope of Work: Coulson Ice Blast (CIB) report no. 1070601, prepared in fulfillment of Bechtel BWXT Idaho, LLC (BBWI) Purchase Order no. 0000759, per Statement of Work entitled: Scope of Work for Coulson Ice Blast Decontamination” as follows: “Coulson Ice Blast (CIB) will conduct surface stripping tests on surrogate coupons they will receive from the INEEL ...


    By Coulson Ice Blast

  • Case Study: 48 Hour Tank Lining Repair

    GUEST BLOG: 48-hour tank lining corrosion repair, thanks to SPI’s fast curing Polyshield HT-100F UB In this post, we focus on a tank lining corrosion repair that’s recently been completed by our 2015 Global Distributor of the Year, SPI Performance Coatings Ltd, of Wiltshire UK. This particular project involved a ...

  • GE Leakwise Application Notes: Leak Detection by Groundwater Monitoring

    Risks of Groundwater Contamination Hydrocarbon leakage, from Underground Storage Tanks (USTs) and from the bottoms of above ground tanks, can seep into the groundwater, where it forms a floating oil sheen, or a thick oil layer. This layer, if left undetected, ...


    By GE Analytical Instruments

  • Measuring Geomembrane Tensile Strength – 1” or Dumbbell?

    Abstract: Specifying a tensile strength or % elongation for any given application is necessary to avoid any possible failure in the geomembrane.  There are many factors to consider including: testing equipment, thickness, load cell, type of grips, and sample geometry.  Although ASTM D7176 currently requires a 1” tensile strip, they will be considering a dumbbell-shaped sample as ...

  • KBr pellet faults | Spectroscopy Guides

    Generally, it is easy to produce a good quality KBr pellet if a decent Evacuable Pellet Die is used correctly, in conjunction with an appropriate Hydraulic Press. However, some faults in the produced sample ...


    By Specac Limited

  • Crawler Size: The Right Investment for the Right Pipeline Inspection Application

    As with any maturing technology, the inspection crawler market has evolved from a handful of basic models to a vast array of configurations, each uniquely adapted for nearly any pipeline inspection application.For buyers, this can also be a double-edged sword since finding the right crawler among the myriad of choices can require research, forethought, and inevitably some compromise. So, here are ...


    By Envirosight LLC

  • Digging for data on Africa’s climate future

    The cardboard box is covered with a layer of dust so thick it must have been tucked away in this Kenyan basement for decades. The researcher wipes off the dust and rummages through the papers stored inside by someone long since retired. Sheet after sheet of neatly typed paper emerges, the faded rows of numbers detailing rainfall, temperature and wind speed. In a way, the researcher is hunting for ...


    By SciDev.Net

  • Gas Safety in the Laboratory

    Modern laboratories use a number of gases as part of their daily operations. This blog details two of the most common methods of laboratory gas supply, and their associated safety risks and benefits. A number of gases are used in laboratories to support various applications such as Chromatography (GC and LC-MS) Spectroscopy, ELSD and Sample Preparation, to name just a few. Helium, hydrogen and ...

  • Update on the homeowner heating oil safety bill

    All homeowners in Massachusetts should be aware that on December 29, 2008, the State Senate enacted the long-awaited Homeowner Heating Oil Safety Bill as Chapter 453 of the Acts of 2008. It required homeowners to upgrade their existing oil heat supply line and insurance companies to offer coverage for a spill by July 1, 2010. On January 5, 2009, it was signed by the Governor. On June 30, 2010, a ...


    By Penney Engineering, Inc.

  • Catalytic Oxidizers…What You Should Know.

    Within the U.S., depending upon specific plant operations, geographic locations, etc.,  many companies concerned with controlling VOC emissions have been operating air pollution control systems for years.  However, due to business expansion, plant modifications or recent changes in EPA guidelines, an increasing number of companies are now finding it necessary to install new emission control ...


    By The CMM Group, LLC

  • 445 Sectional Steel Water Tanks Case Study

    These images show a large sectional steel tank before any preparation work and then after preparation. The large sectional steel tank was fully relined with Acothane DW. A lining system was required for a newly constructed sectional steel effluent tank located at a cheese factory in the South West. The large sectional storage tank is sized at approximately 33m x 2.4m x 3.6m (with no roof) and ...


    By Acothane UK Ltd

  • Funding Innovative Uses For Scrap Tires

    Many States are cleaning up their stockpiles of scrap tires, but more roll in every day. According to the industry, each person in the United States generates one used tire annually. A number of states like North Carolina and Illinois are providing grants to stimulate markets for products made from scrap tire rubber, while states like Texas and New York are developing new civil engineering ...


    By BioCycle Magazine

  • 332 Braithwaite Tanks Case Study

    Severe corrosion had caused substantial holes to develop on the Braithwaite Water Tanks. The roof was repaired utilising steel plates. The smaller holes were repaired using a combination of metal filler and GRP bandaging in conjunction with Acothane DW. A London hospital recently had a problem with two Braithwaite water tanks. Both tanks are located in a roof top plant room and had ...


    By Acothane UK Ltd

  • A Breath of Fresh Air for Your

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With over two decades of proven success, catalytic oxidation is a popular method for controlling volatile organic compound (VOC) emissions.During the past 25 years, industry has made progress in ...


    By The CMM Group, LLC

  • How good is that environmental nonprofit, anyway?

    Green groups face a growing call to measure and report how well they do their jobs Greenpeace rates tech companies on their data centers. Oxfam America ranks food brands on the sustainability of their supply chains. The ...


    By Ensia

  • Troubleshooting injection volume variation in the Concurrent Solvent Recondensation – Large Volume Sample Injection Technique

    I’ve started receiving a number of questions about the large volume injection technique called Concurrent Solvent Recondensation – Large Volume Sample Injection. Most recently, a question came through the Tech Service group about injection volume variation. I had encountered a similar problem when working on the 50 µL injection for the combined 1,4-Dioxane and Nitrosamines ...


    By Restek Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you