three screw pump Articles

  • Screw Pumps Stockholm - Case Study

    The order for renovating three screw pumps is not remarkable, but the location of Danviken Pump station however is unique: in a cave in the middle of the city of Stockholm, near the Royal Palace and City Hall. Landustrie installed three screw pumps with a diameter of 2.60 meter. Screw length 9.9 m - capacity 9720 m3/h - power 160 kW. The screw pumps are supplied with eco-friendy ...


    By Landustrie Sneek BV

  • Flexibility is key: Screw pumps in oil-supply systems

    Flender AG, a subsidiary of Siemens AG, has been using screw pumps from Allweiler AG for more than 25 years. Flender’s plant in Voerde, Germany (in the industrialized Ruhr region) manufactures gear units for extruder systems and vertical mills. The pumps supply the gear units with oil that is needed both for lubrication and for cooling. Large vertical mills require as much as 2000 l/min in ...


    By ALLWEILER GmbH

  • Pumps in lubricant production

    A major business segment at Hermann Bantleon GmbH is the development, production, and sales of lubricants. At its plant in Ulm, Germany, this company starts with high-quality base oils and produces both universal and customized lubricants according to its own formulas. Customized products are often the best way to meet special requirements in cutting and non-cutting production processes. They can ...


    By ALLWEILER GmbH

  • Is Your Trailer Pump Impeller Installed Correctly?

    Over the years trailer pumps get modified, parts get replaced and sometimes one of those parts is a new impeller. Here are some tips for inspection, removal and installation to make sure your impeller gets installed correctly. IMPELLER ROTATION AND ASSEMBLY INSPECTION To avoid expensive repairs and downtime, take a minute and verify that your impeller is rotating in the right ...


    By SRS Crisafulli, Inc.

  • Pumps used during tunnel construction: Long service life is crucial

    "Years of reliability is our first priority," according to engineer Albert Feisst, the director of liquid engineering who is responsible for all pumps used in Herrenknecht AG tunnel boring machines. Headquartered in southwest Germany, Herrenknecht is a global market leader in its industry. For more than 30 years, pumps from Allweiler AG have played a key role in these machines. Some tunnel boring ...


    By ALLWEILER GmbH

  • Heat Pump Used to Drain Contaminated Sludge in a Steel Factory

    Summary In 1987, new regulations required that factories dispose of their contaminated water and waste themselves. Making galvanised steel wire, the Stelfil factory produces sludge contaminated with lead and zinc. Stelfil spent thousands of dollars to bury this waste and evaluated three systems to remove most of the water: a gas dryer, an induction heated screw conveyor and a heat pump system. ...


  • Dunstable sewage treatment plant steps up to mono nov for a complete extraction package

    Underlining its ability to supply either individual products or complete packaged systems for this type of application, Mono also provided two screw extractor systems and a single screw conveyor to partner an existingunit. The original step screen units installed on the Dunstable plant’s inlet flow had proved to be inefficient and unreliable. The replacement Discreen units now screen the inflow, ...

  • Fountain creek sediment collector - case study

    An innovative sediment management method, a 30-ft wide, high capacity, Sediment Collector, is currently installed in Fountain Creek, Pueblo, Colorado upstream of the confluence with the Arkansas River.  This installation is intended to demonstrate a new technology available to reduce the need for dredging.  The purpose of the Sediment Collector is to demonstrate the capability to lower ...


    By Streamside, LLC.

  • Potential refill solutions for the food and non-food retail sectors – feasibility study

    Refill systems have the potential to significantly reduce both retail packaging waste and product waste. This favours the selection of high volume products that show significant potential weight savings. Such systems involve the initial sale of products in a dispensing container such as a trigger spray or a pump dispenser, with customers encouraged to purchase a simple container to refill the ...

  • Entrepreneur Connects Generators To AD

    A Northeast company brings anaerobic digestion and renewable energy to the feedstock sources in Ohio and New York State. Western New York is one of the top dairy-producing regions in the U.S. The by-products of making milk, cream, yogurt and other dairy products have certain characteristics that make them ideal fuel for anaerobic digesters designed to produce methane gas for the ...


    By BioCycle Magazine

  • Bioremediation of Effluent the Pulp and Paper Industry

    The treatment of industrial effluent from the paper manufacturing facilities in British Columbia is a major concern because the effluent is discharged into prime salmon habitat in the marine environment (Cross, 1994). High levels of biological oxygen demand (BOD) in the effluent reduce the dissolved oxygen (DO) available to species in the marine environment. In 1988, the Federal Department of ...


  • Dust Controlled at Source by TurboSonic Dry Fog® Suppression System

    When silica, limestone, cement, aggregate and other respirable dust particles ranging in diameter from 0.1 to 70 microns are airborne, they create a safety and health concern and an aesthetic nuisance. As a source of physical discomfort, lost materials and wear on conveying pulleys, idlers, belting and motors, such dust is a significant factor in lowered productivity and added operating and ...


  • `Hyperwaste Reduction` :Organics Recycling May Get Digested Look In Iowa

    CEDAR RAPIDS — with active support from the Iowa Department of Natural Resources (DNR) — is optimistic about its new strategy to expand organics recycling. Under the leadership of executive director Dave Hogan, the Bluestem Solid Waste Agency, which serves the Cedar Rapids region, is presently composting 118,000 tons/year of yard trimmings and paper/pharmaceutical sludges. But Hogan is convinced ...


    By BioCycle Magazine

  • Is Waste Going to be Our Apocalypse Without a Noah’s Ark to Save Us?

    Human beings have been dumping waste in water, including the ocean, since before the Agricultural Age. The Industrial Age brought with it new materials to dump, chemical wastes and by-products. Some materials are dumped into rivers and find their way to the ocean by running downstream. Other materials are dumped directly into the ocean from boats. Plastic is a harmful pollutant that does not ...


    By ABCOV Companies

  • Hol’z dir! Sustainable briquette manufacture in the Augustinuswerk Jessen case study

    Since only very recently the Augustinuswerk in Jessen has been producing wood briquettes under its own brand name of “Hol’z dir” in a separate workshop for the handicapped. Only machines from shredder specialist WEIMA are used for production, their own production facilities being only a few kilometres away in Großnaundorf. It is very busy here. Every day 3,000 wood ...


    By WEIMA

  • Adding AD To Existing Composting Site Footprint

    About an hour’s drive west of Munich in southern Germany, the City of Augsburg had been served by an indoor composting facility since 1994. It was operated by Abfallverwertung Augsburg (AVA), three quarters of which was initially owned by the City of Augsburg and the districts of Aichach-Friedberg and Augsburg. Until recently, the remaining quarter was owned by a private company but as of ...


    By BioCycle Magazine

  • Low-Flow (Minimal Drawdown) Ground-Water Sampling Procedures

    Untitled Document Background The Regional Superfund Ground Water Forum is a group of ground-water ...


    By Solinst Canada Ltd.

  • Typical process weighing applications

    Process weighing relates to the weighing of a powder material as part of a production process. The technology includes continually monitoring a material in a silo, discharging material by weight or rate, or even weighing products on the move. This article gives an overview of most of the typical process weighing applications that are used in all sorts of industries: level or inventory measuring ...


    By Hardy Process Solutions

  • Blending of would-be landfill turns out greener cement-based products

    The vision of a greener future for the construction industry motivates Andrew Dennis, an architect here who founded a company dedicated to producing environmentally friendly cement-based products. Instead of the heavy aggregates found in standard concrete, the materials made by GigaCrete Inc. include non silica based sands and byproducts of coal combustion, fly-ash and bottom-ash and recycled ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you