titration instrument Articles

  • Beyond Karl Fischer: Titration Methods

    Almost every industry is concerned about water concentration levels in some way. Food and pharmaceuticals automatically come to mind, but fuel, explosives, agri-chem, and polymer processing businesses (to name a few) all rely on moisture content as a critical quality attribute. Karl Fischer titration (KFT) is the best-known technique for determining water levels in samples, and it is supported ...


    By Spectro Scientific

  • Automated Titration Analysis Enhances Productivity - White Paper

    Multi-Parameter Analysis and Enhanced Productivity by the Consolidation of Inorganic Wet Chemistry Methods Summary Multi-tasking and time allocations are key components to running an efficient laboratory and decreasing the cost per analysis for pH, conductivity, alkalinity, chloride, fluoride and ammonia.  The cost of analysis has risen over the years while ...


    By MANTECH Inc.

  • Water Quality Analysis Safeguarding Families

    Water is intensely purified and treated by water authorities before being ready for thousands of families. Everybody expects clean and safe tap water when turning on their taps. A water quality analysis center in Shanghi, China excels in its water testing and analysis with fully automatic potentiometric titration. Traditional Water Quality Analysis In order to ensure water hygiene and safety ...


    By Mettler - Toledo Int. Inc

  • New total hardness (Calcium and Magnesium) automated titration method case study

    MANTECH INC. is a leading manufacturer of automated multi-parameter, titration, Biochemical Oxygen Demand (BOD) and Chemical Oxygen Demand (COD) laboratory and process instruments. MANTECH developed the first automated software based titration system in the world. By listening to our environmental customers, MANTECH understood the need to develop a new total hardness (calcium and magnesium) ...


    By MANTECH Inc.

  • TitraSip automated pipetting: justification over manual pipetting and analysis in beakers case study

    MANTECH INC. is a leading manufacturer of automated multi-parameter, titration, BOD and COD laboratory instruments. MANTECH developed the first automated titrator to include automated pipetting. The software controlled TitraSip module has proven to generate results that are accurate, precise and enforceable. Water quality is of paramount importance to ecosystems and human health and the TitraSip ...


    By MANTECH Inc.

  • TitraSip automated pipetting improves accuracy and precision over manual pipetting case study

    MANTECH INC. is a leading manufacturer of automated multi-parameter, titration, BOD and COD laboratory instruments. MANTECH developed the first automated titrator in the world to include automated pipetting capability. In our short history, there are already >1000 TitraSip’s in daily use in accredited laboratories around the globe. The software controlled TitraSip module has proven to ...


    By MANTECH Inc.

  • Two environmental laboratories, 1 private and 1 government, optimize automation and ROI with investment in BOD/Titrate duo (case study)

    MANTECH INC. is a leading manufacturer of automated multi-parameter, titration, BOD and COD laboratory instruments. Both a Private and Government Environmental Laboratory required optimized return on investment for both automated BOD/CBOD and automated multi-parameter systems. They each invested in the MANTECH BOD/Titrate Duo. Background Each laboratory identified ...


    By MANTECH Inc.

  • High range chlorine testing – what are the options?

    Higher range chlorine solutions are typically used for disinfecting products but standard chlorine meters often cannot measure to higher ranges. For example the Hach Pocket Colorimeter II for chlorine measures to a maximum of 2mg/L, and the ...


    By Camlab Limited

  • In-Situ® Optical RDO® Methods for Dissolved Oxygen Measurements Outperform Traditional Methods

    ABSTRACT Three methods are generally used to measure dissolved oxygen (DO) in surface waters: Winkler titration, membrane-covered electrochemical sensors (polarographic or galvanic cell), and luminescent-based sensors. Optical (luminescent) technology for measuring DO levels in water has quickly become a well-accepted method due to many advantages over membrane-based sensors, and its close ...


    By In-Situ, Inc.

  • The way forward - Case Study

    Vessel owners continue to seek ways to reduce operational and maintenance costs in an era of variable demand and increased environmental regulations Oil analysis is a critical shipboard tool for the early detection of problems that have the potential to damage vital systems and for enabling the efficient allocation of maintenance resources. Current onboard tests typically duplicate lab-based ...


    By Spectro Scientific

  • Determination of protein in wheat flour samples - Case Study

    Customer: Grain Quality Testing Laboratory, PARC, Pakistan GQTL is a part of Pakistan Agriculture Research Council under the Federal Ministry of Food Security and Research, Govt. of Pakistan. The laboratory is involved in R&D and testing activities related to grain quality and contaminant residues by means of validated instruments. Application: Protein in wheat ...


    By BÜCHI Labortechnik AG

  • A High School student`s perspective of Chemical Oxygen Demand, Green Chemistry versus dichromate chemistry case study

    MANTECH INC. is a leading manufacturer of automated multi-parameter, titration, Biochemical Oxygen Demand (BOD) and Chemical Oxygen Demand (COD) laboratory and process instruments. Recently, a High School student. Maja Menegotto, submitted a science project with the topic: Chemical Oxygen Demand (COD): GREEN Chemistry versus Hazardous Chemistry In particular, this ...


    By MANTECH Inc.

  • Moisture in Oils: The Three-Headed Beast

    Abstract Moisture contamination in in-service lube oils is perhaps one of the most destructive forms of engine corrosion second only to particle contamination.  Water contamination in oil can be categorized into three forms of water; Free, emulsified, and dissolved.  All forms of water have direct consequences to the oil and gears of the engine, but indirect consequences as ...


    By AMETEK Brookfield

  • Time is of the essence in plastics

    Introduction Determining the moisture content in plastics is an important step in the extrusion and molding process of many industrial resins.  Excessive moisture content can lead to microscopic steam pockets that can blister or weaken the integrity of the molded product.  Plastic pellets in a saturated or ‘wet’ state can also mislead buyers of bulk plastic since ...


    By AMETEK Brookfield

  • A Faster and Better FluidScan with Version 5

    Measure water contamination in turbine oils down to 300 ppm The latest version of FluidScan software can detect total water presence as low as 300 ppm in turbine oils.  The method provides an alternative to laboratory tests such as Karl Fischer titration when fast, simple, and reagent-free analysis is needed. In addition to measuring water contamination, the FluidScan ...


    By Spectro Scientific

  • The Secret to Quality Food Products

    Quality is everything when it comes to food, and accurate moisture control is essential to quality. Decrease spoilage, wasted products and lost profits by making sure you’re accurately monitoring the moisture content of your food products. Join us July 17-19 in Chicago, IL at the International Food Technologists Annual Meeting & Expo ...


    By AMETEK Brookfield

  • Nitrogen analysis of pharmaceutical excipients

    Customer: Butterworth Laboratories, United Kingdom Wilh nearly 40 years' experience, Butterworth Laboratories remains an independent UK con¬tract analytical service providing Method Development, Method Validation, Stability Testing and OC Testing to the pharmaceutical, medical device and chemical industries. They work in part¬nership with clients who not only recognize expertise ...


    By BÜCHI Labortechnik AG

  • High Quality Moisture Analysis for High Value Resins

    Whether you’re making syringes or turkey basters, pacemakers or milk jugs, maintaining the correct moisture content in your resins is essential to your production process. Join us February 9-11 in Anaheim, CA at Plastec West / MD&M West, booth 3920, and see why our instruments are considered the leaders in moisture analysis for the medical device ...


    By AMETEK Brookfield

  • Multi-Parameter Analysis and Enhanced Productivity by the Consolidation of Inorganic Wet Chemistry Methods

    Summary Multi-tasking and time allocations are key components to running an efficient laboratory and decreasing the cost per analysis for pH, conductivity, alkalinity, chloride, fluoride and ammonia.  The cost of analysis has risen over the years while revenue from these parameters has remained the same.  Much of the high cost is due to the use of multiple instruments, multiple ...


    By MANTECH Inc.

  • Water quality testing: solutions from catchment to waste

    Globally, over 80% of the wastewater generated by society flows back into the environment without being treated or reused.1Clean water is an essential part of daily life, from catchment all the way through to wastewater treatment, therefore analysis throughout the whole cycle ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you