toc analyzer Articles

  • Real Time TOC Analysis in Steam and Condensate

    Executive Summary Steam in petro/chemical plants could be contaminated with hydrocarbons (TOC = Total Organic Carbons) from various sources. In any case this is a sign for defects in the process, whether it they occur in the heat exchanger, the blow down vessel, the condensate recovery or other parts of the system. Conventional solutions to monitor such contaminations use TOC- ...


    By JCT Analysentechnik GmbH

  • TOC Analysis for Standard Methods 5310B: High-Temperature Combustion Method

    Introduction Total Organic Carbon (TOC) is a rapid method that analyzes for organic carbon and expresses the result as the amount of carbon found. It is a non-specific method unable to distinguish between various organic species and only indicates that organic carbon compounds are present. Organic carbon analyzers operate by the determination of the amount of total carbon present in a ...

  • Calibration stability of the sievers 900 series TOC analyzers

    Objective One of the advantages of the membrane conductivity measurement system employed in the Sievers 900 Series TOC Analyzers, compared to other TOC analyzers, is the excellent stability of the calibration. To illustrate this, a series of tests were conducted on three 900 Series analyzers over the course of a 14-month period and the results are  summarized in this report . The 900 ...


    By GE Analytical Instruments

  • Choosing the appropriate TOC analyzer for your application?

    In choosing a Total Organic Carbon (TOC) analyzer, among the many factors that need to be given consideration are not only the current instruments and their accessories available on the market, but specifically to their method of sample oxidation in relation to the sample matrix. Different oxidation techniques may affect the analytical data due to the components within the sample matrix. This ...


    By Teledyne Tekmar

  • Characterization of Algae by TOC Measurement

    Global warming due to the excessive use of fossil fuels is becoming a problem which has prompted and accelerated the search for alternative fuels. Among the more attractive alternatives is biomass fuel, which is attracting considerable attention. Microalgae can be used for the production of oil without competing with food production, and to a greater extent than other biofuels, its ...

  • Measuring TOC in Brine Solutions

    In the chlor-alkali and electrolysis industries, as well as many others, there is a need to analyze for TOC in samples containing high salt concentrations. These samples can range from sea water, which is typically 3% salt, up to brine solutions containing 28% salt. Shimadzu’s TOC-L with the high salt kit (P/N 638-93176-01 for N model & P/N 638-93176-02 for H model) is well suited for ...

  • TOC monitoring upstream of paper mill wastewater treatment facility using online TOC analyzer

    At wastewater treatment facilities of various types of manufacturing plants, pollution load monitoring (upstream monitoring) is becoming increasingly important to ensure appropriate and stable operation and water pollution accident prevention. Pollution load varies depending on the operating status of the plant, so continuous monitoring is essential. Continuous and stable ...

  • Analysis of Cleaning Validation Compounds using the TOC Fusion Analyzer

    By taking an active approach to prevent cross-contamination in pharmaceutical and cosmetic production, international agencies such as the USFDA, ICH, EC, Health Canada, and the WHO have established regulations and guidelines for effective cleaning and sanitization. With the potential side effects due to exposure, limiting carry-over of residual compounds into subsequent batches is crucial. This ...


    By Teledyne Tekmar

  • Case study - Sievers 900/5310 C series TOC analyzers — calibration

    Synopsis The Sievers* 900 and 5310 C Series TOC Analyzers incorporate a number of new features and options designed toimprove the accuracy and linearity of the TOC measurements. Three new calibration options are available in the Analyzers: automatic conductivity offset, automatic TOC autozero, and single- or multipoint calibration of the TC and IC channels Conductivity ...


    By GE Analytical Instruments

  • Application note: The Sievers InnovOx TOC Analyzer: Wastewater Monitoring

    Overview Wastewater is used water. It can include substances such as human waste, food scraps, oils, soaps, and chemicals. Manufacturing industries as well as wastewater municipalities must comply with the United States Environmental Protection Agency’s (USEPA) Clean Water Act (CWA) regulations. In order to discharge treated wastewater and be compliant with the CWA, a ...


    By GE Analytical Instruments

  • Application notes: The Sievers InnovOx TOC analyzer: boiler water monitoring

    Background A boiler system is a semi-closed loop system in which water is heated and converted into steam to power a generator. The steam is then allowed to form a condensate and the process is repeated. Boiler water chemistry directly impacts boiler efficiency and fuel use. Improper water treatment allows scale formation and corrosion. Boiler scale and deposits form when impurities ...


    By GE Analytical Instruments

  • Application Note: Wastewater Neutralization Process Using the Sievers InnovOx TOC Analyzer

    Industrial wastewater is a result of manufacturing, agricultural, environmental, and research activities. Managing the treatment and discharge of industrial effluents is a critical process that ensures compliance with regulatory ordinances, upholds public health and safety, and guarantees the protection of natural and public resources. Classical processes are typically employed to deal with ...


    By GE Analytical Instruments

  • Measurement of TOC in High-Salt Sample

    The quantity of organic matter in seawater is important in the research and monitoring of marine pollution as an indicator of organic pollution. The salt content in seawater is typically about 3.5 %, but using the Shimadzu total organic carbon analyzer, it is possible to measure the TOC directly without dilution or other pretreatment procedures. Here, we introduce an example of measurement of ...

  • Monitoring of Algae Growth by TOC Measurement

    Global warming due to the excessive use of fossil fuels is becoming a problem which has prompted and accelerated the search for alternative fuels. Among the more attractive alternatives is biomass fuel, which is attracting considerable attention. Microalgae can be used for the production of oil without competing with food production, and to a greater extent than other biofuels, its ...

  • Measurement of TOC in Perfluorochemical (PFOS) Solution

    PFOS is an extremely stable compound with strong carbon - fluorine bonds, and reports of its accumulation in wildlife and the environment have attracted international attention and concern, leading to the designation of PFOS as a persistent organic pollutant (POP).The persistent nature of PFOS prevents oxidative decomposition using wet chemical oxidation TOC analyzers; however, the Shimadzu ...

  • New gas calibration method eases TOC analysis

    LAR Process Analysers AG of Berlin,  Germany expanded the range of feaiures of its measuring device QuickTOC, which facilitates the monitoring of ultra pure and cooling water, boiler feed and condensate measurement, and industrial wastewaters. For many years, the Berlin company lias been developing, high quality measuring devices and processes for the TOC analysis of condensates and boiler ...


    By LAR Process Analysers AG

  • TOC Determination in Solid Samples using the Suspension Method

    The TOC content in solids plays an important role in the classification of soils, sludges and sediments. According to the German Ordinance on Environmentally Compatible Storage of Waste from Human Settlements, TOC in solid materials is one of the key parameters for the characterization of wastes as part of the acceptance control of landfills. This important control measure requires a ...

  • TOC System Suitability Test for Sterile Water

    The United States Pharmacopeia (USP) specifies that total organic carbon (TOC) content be used for management of organic impurity values permitted in bulk purified water, water for injection, in addition to sterile purified water and sterile water for injection. According to USP, TOC analyzers to be used for sterile water must satisfy the TOC system suitability test using test water ...

  • Application notes: TOC analysis in a chemical laboratory

    What You Need to Know Analytical laboratories in the chemical industry are routinely tasked with monitoring organics in water across a wide range of applications. For example, organic carbon analysis is being used to: Monitor plant storm water and wastewater Test for condensate system or boiler integrity Enhance cooling and make-up water quality ...


    By GE Analytical Instruments

  • Online analysis of TOC, TNb, TP, and COD in water

    The control of waste water treatment plants is of special importance - from an ecological as well as economic point of view. The most common water parameters for controlling and optimization are the total organic carbon (TOC), chemical oxygen demand (COD), total nitrogen bound ( ...


    By LAR Process Analysers AG

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you