TOC water testing Articles

  • TOC System Suitability Test for Sterile Water

    The United States Pharmacopeia (USP) specifies that total organic carbon (TOC) content be used for management of organic impurity values permitted in bulk purified water, water for injection, in addition to sterile purified water and sterile water for injection. According to USP, TOC analyzers to be used for sterile water must satisfy the TOC system suitability test using test water ...

  • Organics Monitoring (TOC)

    Total organic carbon (TOC) testing is the traditional method for determining organic matter in water. However there is a far more practical, affordable and often more useful way to measure organic matter. UV absorbance testing (UVA) is rapidly becoming the preferred method of measuring organics even when the levels of organics being measured are very small. Organic Matter Organic ...


    By Real Tech Inc.

  • Protoc TOC succes at Manchester Airport

    The case study outlines the installation of Protoc TOC analysers at Manchester International Airport used for continuous surface water quality monitoring and control. The Protoc TOC instrument manufactured in the UK by Pollution & Process Monitoring Ltd was rigorously tested and was selected for a number of installations at critical drainage locations which have proved the reliability of the ...

  • Faster, more accurate test results for water analysis

    The future is bright for a Guelph company whose innovative water-quality monitoring technology is helping industries and municipalities save millions of dollars while better protecting the environment. MANTECH manufactures water analysis systems that provide faster, more accurate test results while using environmentally-friendly methods. Incorporated in 2010, MANTECH has worked with Innovation ...


    By MANTECH Inc.

  • Data Requirements for Ground Water, Surface Water, and Leachate

    It is common for ground water to be contaminated with the water soluble substances found in overlying soils. Many of the required data elements are similar, e.g., pH, TOC, BOD, COD, oil and grease, contaminant identification and quantification, and soil and aquifer characterization. Additional water quality monitoring data elements include hardness, ammonia, total dissolved solids, and metals ...

  • Application notes: TOC analysis in a chemical laboratory

    What You Need to Know Analytical laboratories in the chemical industry are routinely tasked with monitoring organics in water across a wide range of applications. For example, organic carbon analysis is being used to: Monitor plant storm water and wastewater Test for condensate system or boiler integrity Enhance cooling and make-up water quality ...


    By GE Analytical Instruments

  • PeCOD vs Other Organic Pollution Testing Methods

    Find out How MANTECH’s PeCOD measures up with other systems in organic pollution testing methods! In James Pickup, Rijkswaterstaat Internship Thesis, read how our PeCOD analyzer performs beside the Total Organic Carbon (TOC) method. Also learn how the PeCOD exhibits a strong correlation to the traditional chemical oxygen demand (CODCr) method, Biochemical Oxygen Demand (BOD5) method and ...


    By MANTECH Inc.

  • New gas calibration method eases TOC analysis

    LAR Process Analysers AG of Berlin,  Germany expanded the range of feaiures of its measuring device QuickTOC, which facilitates the monitoring of ultra pure and cooling water, boiler feed and condensate measurement, and industrial wastewaters. For many years, the Berlin company lias been developing, high quality measuring devices and processes for the TOC analysis of condensates and boiler ...


    By LAR Process Analysers AG

  • Biodegradability of industrial textile wastewater – batch tests

    Following new trends we applied oxygen uptake rate (OUR) tests as well as long-term tests (in two batch bioreactors systems) in order to assess the biodegradability of textile wastewater. Effluents coming from a dyeing factory were divided into two streams which differed in inorganic and organic contaminants loads. Usefulness of the stream division was proved. Biodegradation of the low-loaded ...


    By IWA Publishing

  • Calibration stability of the sievers 900 series TOC analyzers

    Objective One of the advantages of the membrane conductivity measurement system employed in the Sievers 900 Series TOC Analyzers, compared to other TOC analyzers, is the excellent stability of the calibration. To illustrate this, a series of tests were conducted on three 900 Series analyzers over the course of a 14-month period and the results are  summarized in this report . The 900 ...


    By GE Analytical Instruments

  • Water quality testing: solutions from catchment to waste

    Globally, over 80% of the wastewater generated by society flows back into the environment without being treated or reused.1Clean water is an essential part of daily life, from catchment all the way through to wastewater treatment, therefore analysis throughout the whole cycle ...

  • Case study - GE and Severn Trent Services work together to gain UKAS accreditation for drinking water and waste waters

    Background Severn Trent Services (STS) is a leading provider of analytical services with a network of five laboratories and two service centers across the UK and Ireland. For over 20 years, STS has provided various analytical, sampling and monitoring services to meet customers’ requirements in areas such as potable water, waste water, groundwater, legionella, contaminated land, ...


    By GE Analytical Instruments

  • A triple play for CETCO oilfield services - treating hydrostatic test water

    CETCO Oilfield Services was selected to treat and discharge approximately 150,000 barrels of hydrostatic test water in Houston, Texas. The water was treated and discharged into a nearby stream under a National Pollutant Discharge Elimination System (NPDES) permit from the State of Texas. The permit also required that there be no discharge of floating solids or visible foam, no discharge of ...


    By CETCO Energy Services

  • Successful degradation of a cobalt organic complex and TOC by advanced oxidation processes

    A chemical manufacturing plant needed to remove cobalt from biologically treated wastewater. The current cobalt concentration is higher than 1000 ppb and needs to be reduced to below 5 ppb. Cobalt speciation analysis results have shown that much of the cobalt is present as organically bound complexes. These complexes are known to be difficult to remove by adsorption, precipitation ...


    By ESCO International (EI)

  • Disinfection By-Products (DBP) Compliance through Pre-treatment for TOC Removal

    Over the last few years, utilities have adjusted their existing processes to reduce the formation of DBPs in order to comply with the Stage 1 DBP Rule. With Stage 2 looming in the near future, many utilities have nothing left to optimize in order to minimize DBP peaking in the distribution systems. A non-chemical treatment process was developed in response to the need to remove greater amounts ...


    By Orica Australia Pty Ltd

  • Use of Continuous Ion Exchange Process (MIEX®) to Remove TOC and Sulfides from Florida Water Supplies

    Introduction Many Florida water utilities face a number of challenges in treating their water supplies to meet the current EPA water quality standards. These challenges will only increase as the EPA tightens these standards and for many utilities, conventional treatment processes will no longer be suitable. Ion exchange has long been recognised as a technology capable of removing many dissolved ...


    By Orica Australia Pty Ltd

  • New TOC sensor wins Gold IBO award for portable instrument design

    In 2006, the USEPA singled out the distribution system as the most vulnerable component of a utility’s drinking water system. In response, many waterworks are taking a closer look at how they may protect the public’s drinking water. One option is to place online water quality panels throughout the distribution system to detect a change in the baseline water quality. The cost of implementing a ...


    By GE Analytical Instruments

  • Water Treatment Optimization - Case Study

    Drinking water treatment in North America has stringent requirements for effluent water quality, with a great amount of attention being drawn to the presence of hazardous disinfection by-products (DBPs) persisting through water distribution systems. The operation of water treatment plants involves addition of various mixing agents to help with coagulation and settling of organics in the raw water ...


    By MANTECH Inc.

  • Research Institute uses GE InnovOx TOC analyzer to evaluate hydraulic fracturing and oil exploration produced water

    Background The Global Petroleum Research Institute (GPRI) at Texas A&M University-College Station regularly conducts laboratory research studies on various oil and gas produced wastewaters with varying sample matrices. The GPRI tests samples at different shale and oil producing formations using a mobile laboratory, which houses a pilot-scale treatment system for identifying the ...


    By GE Analytical Instruments

  • Statistical significance testing of parallel pilot-scale coagulation optimization study to compare aluminum sulfate and polyaluminum chloride performance

    A 14 month pilot-scale coagulation optimization study was conducted at the Peterborough Water Treatment Plant (Ontario, Canada) to compare treatment performance resulting from the application of aluminum sulfate vs. polyaluminum chloride (PACl). This paper describes results obtained from applying a statistical analysis approach to evaluate impacts on pH, turbidity, total organic carbon (TOC), ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you