total hydrocarbons monitor Articles

  • Understanding and Monitoring Hydrocarbons in Water

    Untitled Document 1. Introduction Oil contamination continues to be a very hot topic, due largely in part to recent catastrophic events with shipping ...


    By Arjay Engineering Ltd.

  • Interpretation of total petroleum hydrocarbon (TPH) results with RaPID assay kits

    SUMMARY The SDI RaPID Assays for petroleum hydrocarbon fuels (Total BTEX, PAHs) have been shown to provide excellent correlation with GC based (8015M) and IR based (418.1) methodologies for testing Total Petroleum Hydrocarbons (TPH). Linear relationships between immunoassay and TPH results with both gasoline and diesel fuels are demonstrated. Fuel reactivities with immunoassay are shown to ...


  • Real Time TOC Analysis in Steam and Condensate

    Executive Summary Steam in petro/chemical plants could be contaminated with hydrocarbons (TOC = Total Organic Carbons) from various sources. In any case this is a sign for defects in the process, whether it they occur in the heat exchanger, the blow down vessel, the condensate recovery or other parts of the system. Conventional solutions to monitor such contaminations use TOC- ...


    By JCT Analysentechnik GmbH

  • Two Detector Solution to Analyzing Sulfur

    Sulfur compounds are reactive, corrosive to pipes, and destructive to catalysts in petroleum refineries. Sulfur emission are strictly regulated globally. When released into the atmosphere sulfur dioxide converts to sulfuric acid resulting in adverse effects on human health and the environment. Sulfur detection is found useful in many other industries; therefore, detection of sulfur compounds in ...


    By Restek Corporation

  • PetroSense Hydrocarbon Sensors and Their Applications

    The increasing concern about hydrocarbon contamination of process water andproduced water has created an increasing need for in-situ, real time, and accurate low costinstrumentation that can provide rapid detection and easily usable in the field. PetroSense sensors [1,2] represents “best in breed” technology for the detectionof total petroleum hydrocarbons (TPH). PetroSense sensors ...


    By PetroSense, Inc

  • PetroSense hydrocarbon sensors and their applications

    The increasing concern about hydrocarbon contamination of process water and produced water has created an increasing need for in-situ, real time, and accurate low cost instrumentation that can provide rapid detection and easily usable in the field. PetroSense sensors [1,2] represents “best in breed” technology for the detection of total petroleum hydrocarbons (TPH). PetroSense sensors ...


    By PetroSense, Inc

  • Monitoring of petroleum hydrocarbon degradative potential of indigenous microorganisms in ozonated soil

    This study was performed to investigate the petroleum hydrocarbon (PH) degradative potential of indigenous microorganisms in ozonated soil to better develop combined pre-ozonation/bioremediation technology. Diesel-contaminated soils were ozonated for 0–900min. PH and microbial concentrations in the soils decreased with increased ozonation time. The greatest reduction of total PH (TPH, 47.6%) and ...


    By Springer

  • Infrared differential absorption Lidar (DIAL) measurements of hydrocarbon emissions

    We report the application of an infrared (IR) differential absorption Lidar (DIAL) system (also capable of ultra violet measurements) built at the National Physical Laboratory (NPL), UK, to field measurements of total site emissions (controlled and fugitive) from petrochemical and landfill installations. The validation of the IR-DIAL was carried out via a series of controlled field experiments ...

  • Engineered wetland removes subsurface hydrocarbons while providing beneficial reuse

    British Petroleum (BP) is operating an engineered wetland to treat petroleum-contaminated groundwater at a 300-acre site in Casper, WY. Release of petroleum products during refinery operations from 1908 until 1991 resulted in significant petroleum hydrocarbon contamination. Over 44,000 yd3 of LNAPL were removed by dual-phase recovery wells and oil/water separators constructed in 1981, but ...

  • Failure of Magnesium Peroxide to Remediate Petroleum Hydrocarbon-Contaminated Sites (PDF)

    Researchers promote magnesium peroxide as a viable method to aerobically bioremediate petroleum hydrocarbons and restore groundwater quality. Suppliers claim that dissolved oxygen released in the saturated zone promotes biological growth for degrading a wide range of hydrocarbons dissolved in water and sorbed onto soil particles. Yet, staff with the CaliforniaRegional Water Quality Control Board, ...


    By REGENESIS

  • Stack gas VOC monitoring

    POLLUTION S.r.l. manufactures POLARIS FID analyzer, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...


    By Pollution Srl

  • Study of polycyclic aromatic hydrocarbons in atmospheric particulate matter of an urban area with iron and steel mills

    Polycyclic aromatic hydrocarbons (PAHs) were analyzed from ambient air particulate matter ...


    By John Wiley & Sons, Ltd.

  • Occurrence and removal efficiency of six polycyclic aromatic hydrocarbons in different wastewater treatment plants

    Occurrence and removal efficiency of six polycyclic aromatic hydrocarbons (PAHs) (fluoranthene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, benzo[ghi]perylene and indeno[1,2,3-cd]pyrene) in wastewater were monitored at different treatment processes in three wastewater treatment plants (WWTPs) by using ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). ...


    By IWA Publishing

  • Biofuels Gas Monitoring

    The Customer The Company is one of the world’s leading developers and producers of advanced fuels and green chemicals. The Process The Company uses a gasification process that breaks down wood chips, waste and other feedstock using plasma technology. The process produces a uniform synthetic gas (syngas) that is used to power their turbine engines. ...

  • Organics Monitoring: A Practical Guide

    Preventing product loss, lowering waste treatment costs, and reducing system maintenance and energy consumption through organics monitoring in the chemical, refining, food, and wastewater treatment industries. Summary Process water and steam condensate contamination includes organic, inorganic, and biological components. Sources of organic contamination include process ...


    By GE Analytical Instruments

  • Air Monitoring for the Gulf Oil Spill

    Ambient air monitoring is a priority in the ongoing efforts to contain and manage the oil spill from the Deepwater Horizon in the Gulf of Mexico. The following provides information about the kinds of airborne contaminants that are currently being monitored in the Gulf, how they are collected and how they are analyzed. For a given project, a suitable sampling plan – developed by ...


  • Avoiding Sewer Fires with Vapor Space Organics Monitoring

    ABSTRACTRegulation of flammable gases released from wastewater discharges is facilitated by the use of the Vapor Space Organics test method. Such regulation can reduce the risk of a flash sewer fire, resulting damage and potential injury. The updated 2003 VSO process developed by Severn Trent Laboratories produced data that was equivalent to the 1990 VSO process developed and used by the ...

  • Bioremediation with compost of a diesel contaminated soil: Monitoring by dehydrogenase activity and basal respiration

    The effect of compost on hydrocarbon degradation was determined during a 120-d incubation period. An evaluation of soil basal respiration and dehydrogenase activity as a monitoring instrument for the bioremediation process of soil contaminated with commercial diesel-oil was carried out. Six soil samples were used: S (control, uncontaminated soil), CS (contaminated soil), CSS (contaminated and ...


    By BioCycle Magazine

  • A Comparison of Point Sensors and Open Path Monitors For Toxic Gas (esp. HF) Monitoring

    Point Sensors Ion Mobility Spectroscope (IMS) – a gas sample is ionized by a radioactive source (Ni63). Differences in ion drift under the influence of an applied electric field produce a spectrum that is dependent on the mass, charge, and shape of the component ions. The detector signal and strength is tuned to the drift time of the ion of interest (in this case HF) and signal strength is ...


    By Boreal Laser Inc.

  • DFM 5.0 doppler flow meter for frac sand slurry flow monitoring

    CanFrac Sands Ltd. of Lloydmister Saskatchewan (Canada) needed a flowmeter that could accurately measure sand slurry flow without being damaged by this highly abrasive product. They selected the Greyline DFM 5.0 Doppler Flow Meter with a clamp-on ultrasonic sensor mounted on the outside of a pipe. CanFrac produce “fracturing sand” used by the oil and gas industry. This special type of ...


    By Greyline Instruments Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you