toxic gas instrumentation Articles

  • Follow toxic gas standards for a smoother project

    Toxic gases, such as Hydrogen Sulfide and Sulfur Dioxide, can injure and kill quickly. Therefore, mitigation of these hazards must be fast and sure. The United States Occupational Safety and Health Administration (OSHA) and other authorities take detection of these gases very seriously. The American National Standards Institute/ American Petroleum Institute (ANSI/API) and ISA industry standards ...

  • Gas Safety in Confined Spaces

    Introduction A confined space is any space large enough for someone to enter and perform assigned work, which has limited means of entry or exit, and which is not designed for continuous worker occupancy. This covers just about every industry, including utilities, construction, hydrocarbon exploration and processing, petrochemicals, marine, agriculture, food processing and brewing, as ...

  • Gas safety in confined spaces

    A confined space is any space large enough for someone to enter and perform assigned work, which has limited means of entry or exit, and which is not designed for continuous worker occupancy. This covers just about every industry, including utilities, construction, hydrocarbon exploration and processing, petrochemicals, marine, agriculture, food processing and ...

  • Pneumatic Focusing Gas Chromatography: A 3-in-1 Continuous, Automated, Ambient-Fence line-Fugitive Emissions Instrument

    This project involved design improvements in both software and hardware, and commercialization of our Pneumatic Focusing Gas Chromatography technology for continuous monitoring of VOCs and Air Toxics and demonstration of its performance in year-long monitoring programs at an EPA Superfund site in Fargo North Dakota and an Oregon Department of Environmental Quality Air Toxics site in Portland ...


    By VOC Technologies

  • The Toxic Effects of Hydrogen Sulfide (H2S) Gas from Sewers on Health & Infrastructure - Case study

    How is Hydrogen Sulfide Created? Hydrogen sulfide emitted from sewers and septic tanks can cause serious health issues. Hydrogen sulfide gas is created and released into the air when waste water remains stagnant for a long period of time, and becomes depleted of dissolved oxygen. Although sewer workers are most likely to be affected by hydrogen sulfide overexposure, people living or ...

  • Detection and measurement of toxic gases from destructive testing of batteries

    Problem Statement New formulations of organic-compound-based batteries for vehicle use must be tested for release of potentially harmful and toxic gases if crushed in accidents. Potential gases include hydrocarbons, fluorocarbons, and hydrogen fluoride, released within seconds of an incident. Actual time-resolved and quantitative data are required from destructive testing to ascertain ...


    By CIC Photonics

  • Gas safety in confined spaces

    An engineer repairs buried cables; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face a common danger, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited.  ...

  • Gas detector communication technology for offshore oil and gas platforms

    In few applications is safety as important as on offshore oil and gas platforms. Explosive hazards from hydrocarbon gases and vapours are an ever-present risk, whilst toxic hydrogen sulphide gas and depleted oxygen environments can pose significant risks to personnel. Gas detectors are therefore essential to provide dependable early warning of gas hazards. Gas detectors are permanently installed ...

  • Fixed multi-parameter gas detection system can ensure industrial facilities are safe from hazardous or toxic gases

    Industrial workplaces are likely to come across one or more hazardous or toxic gases. Combustible gases such as methane are highly dangerous because they can cause large and fatal explosions when ignited. Other problem areas when working in industry are carbon monoxide (which poisons the cardiovascular system), oxygen deficiency, and elevated levels of other gases and pollutants, depending and ...


    By PPM Technology

  • Why instrument hire makes occupational safety sense

    Background Decisions concerning the acquisition of occupational safety monitoring instrumentation are often made by operational staff that may not have visibility of the full financial implications of their choices. The following article will examine the factors affecting these decisions and explain why a strategic decision to hire instrumentation can deliver substantial and wide-ranging ...


    By Ashtead Technology Ltd

  • Selecting and Placing Gas Detectors for Maximum Application Protection

    Many industrial processes involve dangerous gases and vapors: flammable, toxic, or both. With the different sensing technologies available, and the wide range of industrial applications that exist, selecting the best sensor and locating them properly for the job at hand can be a challenge. To ensure a high level of safety, know the latest sensing technologies, which technology is best for the ...

  • Gas cell selection for analysis of electronic gases

    APIMS and FTIR remain the preferred analytical tools for monitoring impurities in the electronic  specialty gases used by the semiconductor industry, although other tools such as CRDS are currently finding application in selected cases. FTIR spectroscopy offers the advantage of the simultaneous measurement of all gaseous species that exhibit dipole moment changes during vibrations at ...


    By CIC Photonics

  • Is your Plant as tight as you think? Leak Detector for extremely toxic Gases, a Field Test Report

    Leak detection of commodity gases in chemical plants is a day-to-day practice. The sensor technology available for this application is field proven and reliable. No question about it, existing sensors will do the job. However, in plants manufacturing or handling extremely toxic substances, the picture is different. For example, take phosgene. The existing sensor technology for leak detection ...

  • Case study - N°NG1 – Natural gas monitoring – Medor Exp

    Context & Challenges Natural gas used for household consumption typically contains odorant sulfur components for safety reasons. As natural gas is normally odorless, the sulfur components are artificially added. When natural gas is transported between various companies, regions or countries, gas companies have to verify that the sulfur species are present as specified. ...


    By Chromatotec Group

  • Gas Monitoring for Ventilation Control and Energy Management

    The growing demand for underground and enclosed parking and maintenance garages (resulting from limitations on land availability) has increased the awareness and need for proper ventilation and control systems. In addition, increased health and safety programs have only added to the concerns of toxic and combustible gases in confined or enclosed spaces. Historically, ventilation and make-up air ...


    By Arjay Engineering Ltd.

  • Multiple gas impurity analyses and verification for semiconductor process tools

    With the increased emphasis on the purity of cleaning, etching and treatment gases by the semiconductor industry, advanced analysis instrumentation is required to monitor the electronic specialty gases and to verify the performance of process tools and components. This paper describes new instrumentation and software specifically designed to accomplish ppb level gas analyses in times as short as ...


    By CIC Photonics

  • How to choose detectors in the dangerous cargo warehouse

    The principle of choosing toxic gas and combustible gas detectors in dangerous cargo warehouse: 1.Dangerous cargo warehouse detection of gas mainly including combustible or toxic. Measurement of the type of gas characteristics, the first is to measure the explosion, second is the measurement of toxicity. The so-called measuring explosion is the detection of combustible gases, such as ...

  • In addition to formaldehyde, decoration, what harmful gases?

    As the saying goes, clothes can make people more beautiful, in fact, the house is the same, when you buy a house, and give it a beautiful coat, can improve the quality of life, living in the house for a long time, re decoration, the old house and get a new life. However, the decoration pollution problem has become a lot of people's heart disease. Today we are going to talk about the ...

  • Improve gas blending accuracy and save money – Case Study

    For DataChem Laboratories, precision mass flow is crucial. DataChem, originally established in 1973 as part of the University of Utah's Research Institute, has grown into a world respected analytical testing laboratory. They have the important job of testing and identifying harmful industrial and environmental toxins—from lead paint found on our children's toys to methamphetamine dust ...


    By Sierra Instruments, Inc.

  • Monitoring And Analysis of Landfill Gases

    CoGDEM is the trade association representing manufacturers and service providers who are active in the field of gas detection instrumentation and environmental monitoring apparatus. Crowcon Detection Instruments Ltd was one of the founding members of CoGDEM, and in this article their Product Manager of Fixed Systems, Andy Avenell, gives an update on Landfill Gas. Landfill is by far the most ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you