toxic gas monitoring technology Articles

  • A Comparison of Point Sensors and Open Path Monitors For Toxic Gas (esp. HF) Monitoring

    Point Sensors Ion Mobility Spectroscope (IMS) – a gas sample is ionized by a radioactive source (Ni63). Differences in ion drift under the influence of an applied electric field produce a spectrum that is dependent on the mass, charge, and shape of the component ions. The detector signal and strength is tuned to the drift time of the ion of interest (in this case HF) and signal strength is ...


    By Boreal Laser Inc.

  • Monitoring Multiple Gas Hazards in Ice Arenas

    The equipment used in an arena such as an ice re-surfacer, ice edger, floor sweepers, lift trucks and other special equipment are more often powered by fuel than electricity. The exhaust produced by the gas, propane or diesel fuel powered machines emits, into the air, carbon monoxide (CO), nitrogen dioxide (NO2) and particulates. Ammonia (NH3) is commonly used in the ice chiller mechanical room ...

  • Gas Monitoring for Ventilation Control and Energy Management

    The growing demand for underground and enclosed parking and maintenance garages (resulting from limitations on land availability) has increased the awareness and need for proper ventilation and control systems. In addition, increased health and safety programs have only added to the concerns of toxic and combustible gases in confined or enclosed spaces. Historically, ventilation and make-up air ...


    By Arjay Engineering Ltd.

  • Gas detector communication technology for offshore oil and gas platforms

    In few applications is safety as important as on offshore oil and gas platforms. Explosive hazards from hydrocarbon gases and vapours are an ever-present risk, whilst toxic hydrogen sulphide gas and depleted oxygen environments can pose significant risks to personnel. Gas detectors are therefore essential to provide dependable early warning of gas hazards. Gas detectors are permanently installed ...

  • Fixed multi-parameter gas detection system can ensure industrial facilities are safe from hazardous or toxic gases

    Industrial workplaces are likely to come across one or more hazardous or toxic gases. Combustible gases such as methane are highly dangerous because they can cause large and fatal explosions when ignited. Other problem areas when working in industry are carbon monoxide (which poisons the cardiovascular system), oxygen deficiency, and elevated levels of other gases and pollutants, depending and ...


    By PPM Technology

  • Oxygen Monitors for the New Millennium

    Oxygen monitors have become a required piece of safety equipment for many industrial and laboratory environments, where the release of certain toxics can create an area unsafe for living beings (human or animal).  When making a purchasing decision on any oxygen detection monitor, one need look no further than the sensor cell found at the heart of the monitor.  While each oxygen ...

  • Is your Plant as tight as you think? Leak Detector for extremely toxic Gases, a Field Test Report

    Leak detection of commodity gases in chemical plants is a day-to-day practice. The sensor technology available for this application is field proven and reliable. No question about it, existing sensors will do the job. However, in plants manufacturing or handling extremely toxic substances, the picture is different. For example, take phosgene. The existing sensor technology for leak detection ...

  • Understanding the Benefits of Fixed Gas Detection

    "Fixed gas detection is an essential method of ensuring maximum protection for personnel and plant. There are a variety of technologies available for a multitude of applications. Understanding fixed gas detection is the first step in providing safety." What is fixed gas detection? Fixed gas detection is installed with the aim of providing continuous, area and personnel protection. ...


    By a1-cbiss

  • EPA mercury rules: Keeping the lights on while removing toxics from our air

    Next week the U.S. Environmental Protection Agency is expected to finalize new rules to reduce mercury and other toxic air emissions that will affect dozens of antiquated power plants currently operating without pollution controls. These rules have stirred debate in some circles as to whether retrofitting or retiring outdated plants will cause shortfalls in electricity capacity. How will new EPA ...

  • Wireless monitoring for a safe indoor environment

    This article discusses the benefits of wireless technology for continously monitoring the indoor environment. In striving for the construction of energy efficient and cost-effective buildings, the imperative issue of the buildings Indoor Air Quality (IAQ) is often overlooked. This can often lead to a unhealthy indoor environment and even to conditions such as Sick Building Syndrome (SBS) or other ...


    By PPM Technology

  • Gas Detection in Public Swimming Pool Facilities

    Recreational facilities’ indoor swimming pools provide a venue for exercise, competition and fun for all ages as patrons splash, swim, dive and float around in the crystal clear water. To keep the water fit to swim in requires a disinfectant maintenance program commonly using Chlorine, or Chlorine and Ozone. Chlorine is a powerful, corrosive disinfectant and in both gas and liquid forms it ...

  • Fixed Versus Portable Gas Detection – Which Is Better?

    Did you know that workers are needlessly injured every year as a result of leaking toxic or combustible substances? Such incidents are known to involve a wide range of hazardous gases (including ammonia, carbon monoxide, chlorine, hydrogen sulfide, hydrocarbon vapors and so on). The sad reality is that most of these accidents are avoidable if only the workplace is adequately monitored. This leads ...

  • Chlorine Dioxide gas detection: A comprehensive guide

    Introduction Some years agoago, the bleaching process in the paper industry was changed from using Chlorine (Cl2) as bleaching agent to Chlorine dioxide (ClO2). This was a challenge forThis posed a major challenge to industrial hygienists, as there were no sensors or detectors available that were specific to Chlorine dioxide: There was no sensor technology for gas detectors available that ...

  • FTIR gas analysis improves container safety

    Introduction Entry to freight containers represents a significant hazard to staff responsible for inspection, stuffing or destuffing because of the large number of airborne chemicals that can be present. Research in Germany and the Netherlands found hazardous levels of gases and vapours in around 20% of all containers and this level of contamination is now accepted as commonplace. It ...


    By Gasmet Technologies Oy

  • Selecting and Placing Gas Detectors for Maximum Application Protection

    Many industrial processes involve dangerous gases and vapors: flammable, toxic, or both. With the different sensing technologies available, and the wide range of industrial applications that exist, selecting the best sensor and locating them properly for the job at hand can be a challenge. To ensure a high level of safety, know the latest sensing technologies, which technology is best for the ...

  • Analox case study: Monitoring oxygen at Cranfield airfield

    Introduction For personnel safety, monitoring of oxygen levels was required as part of an experimental field campaign based at Cranfield airfield. This experiment was undertaken by researchers in the atmospheric physics group at Imperial College London. The researchers are interested in measuring Far-infrared radiance fields in the atmosphere ...


    By Analox Sensor Technology

  • Benefits of HART Communication-Enabled Gas and Flame Detectors

    Catastrophic results can occur when a fire or a flammable/toxic gas release goes undetected in any petrochemical facility. For early warning and prompt hazard mitigation, flame detectors and gas detectors are essential tools. Clear, usable, diagnostic information from these detection instruments is extremely valuable in ensuring the devices are properly maintained, tested, and poised to protect ...

  • Safety Systems Depend on Reliable Field Sensors (Emphasis on Fire and Gas Detectors)

    Abstract Because not all hazards are the same, identifying and quantifying the hazard is the starting point in choosing sensing technology. Not all detectors are the same, and they should be selected according to their ability to detect the hazard. This paper gives a broad summary of technologies that provide users reliable responses to hazardous conditions, that minimise false ...

  • Energy Recovery from Residual Waste by Means of Anaerobic Digestion Technologies

    ABSTRACT Anaerobic digestion (AD) is a natural process, spontaneously taking place in natural surroundings, such as marshes,bogs, paddies, or in cesspits, landfills, and dedicated digesters, used for the conversion of organic waste into a rich gas. Typical AD substrates are: manure, sewage sludge, high BOD wastewater, and – more recently - the organic fraction of Municipal Solid Waste (MSW), ...


    By ORBIT e.V.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you