trace gas analyser Articles

  • FTIR resolution requirements for industrial gas analyses

    FTIR Spectroscopy FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epitreatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D faciltities, FTIR is applied to combustion ...


    By CIC Photonics, Inc.

  • Improved derivatization protocol for simultaneous determination of alkylphenol ethoxylates and brominated flame retardants followed by gas chromatography-mass spectrometry analyses

    An improved derivatization protocol for the simultaneous determination of alkylphenol ethoxylates and brominated flame retardants with heptafluorobutyric anhydride under triethylamine amine base was investigated. The derivatization reaction was completed in 30 min at 50 °C using hexane as solvent. Under these conditions, it was observed that alkylphenol ethoxylates and tetrabromobisphenol ...


    By IWA Publishing

  • Emissions analyser helps manage power station

    A multiparameter emissions monitor at Thetford power station is being used to demonstrate to the Environment Agency that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Milton Keynes based Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are ...


    By Quantitech Ltd

  • Fractionation of uranium and other trace elements in soil samples collected in selected regions of the Republic of Kazakhstan

    To determine the specific chemical forms of trace elements and to study of their mobility/availability in soil, samples collected in the Republic of Kazakhstan were analysed using the revised BCR protocol. A study was made with dependence of the mobility of different elements of interest on digestion procedures for collected soil samples and Standard Reference Material. The concentrations of the ...


    By Inderscience Publishers

  • Texas Instruments - A Novel Separation Technique for the Analysis of Trace Levels of Atmospheric Contaminants in Inert Semiconductor Process Gases

    A NOVEL SEPARATION TECHNIQUE FOR THE ANALYSIS OF TRACELEVELS OF ATMOSPHERIC CONTAMINANTS IN INERTSEMICONDUCTOR PROCESS GASES J. Scott McWilliams, Alan Johnson, Charlene Long, Jeremiah D. Hogan*Texas Instruments, Inc.Dallas, TX 75265 Low ppb detection limits for contamination in cylinder gases have been achieved with gas chromatography using a modified gas ...


    By Environics, Inc.

  • Analysis of trace hydrocarbon impurities in 1,3-Butadiene using optimized RT-Alumina BOND/MAPD plot columns

    Abstract Identifying and quantifying trace impurities in 1,3-butadiene is critical in producing high quality synthetic rubber products. Standard analytical methods employ alumina PLOT columns which yield good resolution for low molecular weight hydrocarbons, but suffer from irreproducibility and poor sensitivity for polar hydrocarbons. In this study, Rt-Alumina BOND/MAPD PLOT columns were ...


    By Restek Corporation

  • FTIR Emissions Analyser helps manage UK Power Station

    A Gasmet FTIR multiparameter emissions monitor at Thetford power station is being used to demonstrate that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Gasmet’s UK distributor Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are displayed ...


    By Gasmet Technologies Oy

  • FTIR emissions analyser helps manage UK power station

    A Gasmet FTIR multiparameter emissions monitor at Thetford power station is being used to demonstrate that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Gasmet’s UK distributor Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are displayed ...


    By Quantitech Ltd

  • Case study - Monitoring landfill gas

    Infrared absorption Infrared absorption is usually the preferred method for measuring methane and carbon dioxide. Most gases absorb radiation in the infrared region. The wavelength of radiation that is absorbed is determined by the natural vibration frequencies of the molecule. These natural frequencies will depend on several factors. Thus different gas molecules have different natural ...


    By Geotech

  • Danger and Detection of Hydrogen Sulphide Gas in Oil and Gas Exploration and Production

    A rig worker smells rotten eggs near the well head, rubs his itchy eyes as he investigates the frosty pipe connections. After a few moments, he believes all is fine as he no longer smells the tell-tale hydrogen sulphide odour. In this scenario, we can only hope the worker recognises the danger and quickly leaves the site. Oil fields, especially mature ones, can produce hydrogen sulphide gas ...

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

  • Why high temperature combustion of landfill gas?

    Due to the accumulation of knowledge and the tightening of environmental law, the landfill technology has increasingly become concerned with the management of trace compounds in landfill gas. With landfill gas, contamination is through sulphur, chlorine, fluorine, halogenated hydrocarbons and heavy metals. Other trace elements such as volatile organic compounds (VOC), impose environmental ...


    By Hofstetter BV

  • Sonic nozzles for gas calibrators, when simplicity provides accuracy!

    Gas analyser’s calibration is a task required in many applications according to either legislation or quality systems management. This is the case for Air Pollution Monitoring or Continuous Emissions Monitoring devices installed in cabinets, for continuous analysis in remote locations. Measurements in traces range are performed and analytical devices specifications need to be validated and ...


    By LNI Swissgas

  • Dispersion modelling near tunnel exits: simulation and measurements

    Measurements of car exhaust gases were made in May/June 1995 in the vicinity of the Bielefeld tunnel. CO and NOx from car exhausts were measured to allow comparison with a model simulation. Ozone was also measured. These measurements were made using commercial continuous analysers. A valve control system was used to investigate the dispersion of the trace gases. This allowed measurements at ...


    By Inderscience Publishers

  • Evaluating emergency response models of radiological dispersion in complex terrain

    Operational airborne releases of trace quantities of the radioactive noble gas 41Ar from the HIFAR Nuclear Research Reactor located in Sydney, Australia, are valuable for evaluating emergency response models incorporating radiological dispersion. A network of meteorological stations and GR–150 environmental gamma dose detectors are placed in the complex terrain within a 5 km radius of the site. ...


    By Inderscience Publishers

  • Identification of Regional Sources of Methyl Bromide and Methyl Iodide from AGAGE Observations at Cape Grim, Tasmania

    There are large uncertainties in identifying and quantifying the globally significant sources and sinks of methyl bromide (CH3Br) and methyl iodide (CH3I). Long-term, quasi-continuous observations can provide valuable information about their regional sources, which may be significant in the global context. We report 3 years of in situ observations of these trace gases from the AGAGE (Advanced ...


    By Springer

  • Effects of landfill leachate treatment on hepatopancreas of Armadillidium vulgare (Crustacea, Isopoda)

    The major environmental impact to the landfill is emission of pollutants via the leachate and gas pathway.The hepatopancreas of the terrestrial isopod Armadillidium vulgare (Isopoda, Crustacea, Latreille 1804) takes an important role in bioaccumulation of contaminants, such as heavy metals. To evaluate the effects of landfill leachate treatment, two different approaches are here applied: 1) ...


    By John Wiley & Sons, Ltd.

  • The fate of 14C-radiolabelled diclofenac and 4′-hydroxydiclofenac in membrane bioreactor treatment of wastewater

    This study aimed at enhancing knowledge on the fate of diclofenac (DF), together with its main human metabolite 4′-hydroxydiclofenac (4′OHDF), during wastewater treatment by using a laboratory-scale membrane bioreactor (MBR). The reactor was fed continuously with non-radiolabelled diclofenac for a one month period prior to a single pulse of a 14C-radiolabelled solution of DF and 4′OHDF. The ...


    By IWA Publishing

  • Case study - Biogen Greenfinch Westwood

    Non-stop clean power generation uses smart machines and state-of-the-art technology to help keep running. Keep it simple - and to keep it profitable, keep CHP engines running. That's just part of the formula for success at the BiogenGreenfinch-designed and run Westwood anaerobic digestion (AD) plant in Northamptonshire. Built and funded by parent company Bedfordia Group plc this £10 ...


    By Geotech

  • Teledyne Scientific Instruments - Direct Sampling MS and MS/MS for Real Time Air Monitoring

    Presented at the 44th ASMS Conference on Mass Spectrometry, May 12-16, 1996 Portland, OR. Published in the Proceedings of the 44th ASMS Conference on Mass Spectrometry May 12-16, 1996 Portland, OR, in press. DIRECT SAMPLING MS AND MS/MS FOR REAL TIME AIR MONITORING C. Remigi, P.T. Palmer, Dept. of Chemistry & Biochemistry, SF State University, SF, CA ...


    By Environics, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you