tritium-in-air sampling Articles

  • Influence of the Stirring Mechanism on the Precision of the Fusion for VITRIOX GAS and ELECTRIC

    Introduction Homogenization of the melt is an important aspect of sample preparation for X-ray fluorescence analysis using fusion. Whether the fused bead breaks or remains mechanically stable after cooling, depends largely on the homogenization. Once a stable fused bead has been obtained, it is only possible to judge if the sample is truly homogeneously dissolved in the flux by way of ...


    By Fluxana GmbH Co. KG

  • UAV and USV operate with environmental monitoring case - case study

    Time: June,2016. Equipment: sample collection monitoring USV,UAV  The USV and UAV carry through water and air environmental monitoring, which is best way with fast , efficient , accurate and obtain evidence day and night.Our UAV cooperate with the provincial school of ...


    By Oceanalpha Co., Ltd.

  • Ambient Air Sampling Methods

    Pollutants are nothing but any substance that may present in an atmosphere in such a concentration that it may harmful to surrounding, living organism or human being. Sampling and analysis of air pollutants is known as Air quality monitoring and it is major part of environmental monitoring. There are many advanced types of ambient air Sampling methods. we will learn here only which are most ...


    By Perfect Pollucon Services

  • Building Services Management - Air Sampling -

    Untitled Document Maintenance professionals are often the first responders to mold complaints in their facilities. building occupants can be exposed to fungal (mold) ...


    By EMSL Analytical, Inc.

  • General Air Sampling Guidelines (PDF)

    This Standard Operating Procedure (SOP) provides guidance in developing and implementing sampling plans to assess the impact of hazardous waste sites on ambient air. It presents the United States Environmental Protection Agency/Environmental Response Team's (U.S. EPA/ERT's) approach to air sampling and monitoring and identifies equipment requirements. It is not within the scope of this SOP to ...

  • Area Monitoring: Diffusion Sampling

    Indoor and outdoor gas hazards that exist in open areas are usually monitored using diffusion-type sensors. A diffusion sensor has no active sample-drawing system; diffusion sensors rely on the ambient air movement and pressure to deliver the sample to the sensing element. Diffusion-type sensors are a reliable and cost-effective way to monitor open area gas hazards. When installing diffusion ...

  • News on Air 2013, Volume 1: Products for Sampling

    For decades, Sigma-Aldrich has been a key supplier of innovative & high technology air monitoring products for various areas of gas/air sampling. Enclosed, you will find an overview on new and interesting devices to improve or simplify your air sampling. Supelco and Sigma-Aldrich offer a range of active and passive air sampling products, in addition to various analytical chemistry tools ...


    By MilliporeSigma

  • Industrial Hygiene: Quality Assurance In Air Sampling and Analysis

    Industrial hygiene is the recognition, evaluation, and control of chemical, physical, biological, and ergonomic stresses in the workplace. Of the stresses listed, chemical stresses in the form of air contaminants are the most common. Air contaminants, their PELs and TLVs, and how to sample for them, is Industrial Hygiene 101 for most industrial hygienists. However, as simple as sampling and ...


  • Is the Rotameter Ready for Retirement in Air Sampling/Monitoring Applications?

    The variable area rotameter has been the primary tool utilized for determination of flowrates passing through the air circuitry pathway of air sampling or air monitoring systems for many years. In air sampling applications a pollutant is captured on a collection medium (filter paper, charcoal cartridge, etc.) and taken to a laboratory for determination of the quantity of pollutant on the ...

  • Air Sampling Instruments for Radiological Emergency Preparedness

    The necessity of state-of-the-art air sampling and airflow calibration instruments for radiological emergency preparedness teams (REP), civil survey teams (CST) and radiological assistance program teams (RAP) is clearly established in today’s terrorism sensitive environment. Instruments need to be lightweight, reasonably small, simple to operate and to display accurate measurement ...


    By F&J SPECIALTY PRODUCTS, INC.

  • Decontaminating Groundwater Sampling Devices

    These studies are the second part of a two year project that examines decontaminating groundwater sampling devices. In the first year, the efficiency of various decontamination protocols was tested using small test pieces of materials that are commonly used in groundwater sampling devices. Those tests showed that a hot detergent wash and rinse followed by hot air drying (105°C) was the most ...


    By QED Environmental Systems

  • Determination of Lactose Surrogate in Air & Wipe Samples

    Need to know accredited procedures for determining airborne lactose? Here’s a quick and concise review of how to do it. Remember to get the samples back to your accredited laboratory as soon as possible to ensure accurate results. ...


    By Analytics Corporation

  • Setting the standards for headspace sampling by PID

    The responsiveness of PIDs to virtually all VOCs has seen them become the accepted tool for initial site entry assessment, ensuring optimal detection of unknown and often toxic or hazardous chemicals found at hazardous waste sites and chemical emergencies. The speed and accuracy of modern PID equipment means that many worker and community safety concerns during initial and ongoing operations can ...


    By Ion Science

  • Analysis of Stack Emissions Using VOST Air Sampling Tubes and Capillary GC

    United States EPA SW-846, Method 0030, Volatile Organic Sampling Train (VOST), describes the sampling of emissions for volatile compounds from hazardous waste incinerator stacks. Supelco's VOST air sampling tubes are designed to fulfill the method requirements and provide low background levels.               ...


    By MilliporeSigma

  • Evaluating Guidelines for Air Sampling Methods Utilizing Chromatographic Analysis

    The following evaluation guidelines were developed to provide chemists of the Methods Development Team with a uniform and practical means for evaluating sampling and analytical methods that utilize chromatographic techniques. The guidelines define sampling and analytical parameters, specify required laboratory tests, statistical calculations, and criteria for acceptance, and provide a detailed ...

  • Purpose of Air and Surface Mold Sampling or Testing during Assessment

    As part of determining whether an indoor environment is contaminated with excessive amounts of mold and requires remediation, Indoor Environmental Technologies (IET) routinely performs air and surface mold sampling or testing. While there are many types of sampling, IET uses two of them the most: Air sampling using a “spore trap” sampler. Considerable information ...

  • Recent Develoments in Uranium Mining Air Sampling Programs in the United States

    Introduction and History Commercial uranium mining operations in the United States, beginning in the post World War II era, were primarily open pit mining. Open pit mining was the primary extraction method until in-situ recovery (ISR) began in the State of Wyoming in 1961. ISR is also known as in situ leaching (ISL), or solution mining. It is a mining process utilized to ...

  • The 10 Key Factors in Selecting a Stack Sampling Firm

    Summary: This document is a summary of the key factors that you should take into consideration when hiring a stack testing firm.This has been prepared in conjunction with the ASTM criteria for standard practice of testing companies.The ASTM criteria has been supplemented, based on 125 years of direct testing experience, which is the combined years of experience of the individuals that contributed ...

  • Sustainable sampling of native bromeliads for environmental monitoring

    By analysing the leaves of bromeliads, the availability of chemical elements in the atmosphere can be assessed. However, sampling steps affect the reliability of using such plants for environmental quality studies. This paper describes a novel and sustainable sampling methodology for conservation units, in which small discs (6 mm diameter) of bromeliad leaves could be taken without removing ...


    By Inderscience Publishers

  • Determination of uranium concentration in surface soil samples of Iran

    The use of uranium-tipped antitank shells during the Iraq war (2003) caused serious concerns in Iran and the international media over possible contamination of the Iranian environment and consequent long-term health effects. After a shell explosion, uranium is discharged by fire into the air in the form of oxidised particles, which can be dispersed over a radius of several kilometres. Gamma ray ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you