tube cleaning device Articles

  • A Guide to Gas Detector Tubes. Your Questions Answered

    Gas detector tubes are easy to use, are low cost, and the method is intrinsically safe, allowing it to be deployed in all industries. Because detector tubes don’t require calibration, users see the benefits of this technology over electronic gas detectors due to their ease of ...


    By a1-cbiss

  • Cleaning & maintenance magazine

    An analysis of the lighting industry shows a trend away from incandescent bulbs to fluorescent bulbs. Incandescent bulbs use more energy and are more costly and less effective than fluorescent bulbs in the amount of artificial light they produce, as fluorescents produce more lumens than incandescents. Using fluorescent bulbs, however, is not entirely without risk because they contain mercury, a ...


  • Cleaning Up Gasification Syngas

    Documento sin título ...


    By Merichem Company

  • Capillary Tube Thermal Mass Flow Meters & Controllers - A User`S Guide - White Paper

    Abstract Capillary tube thermal mass flow meters directly measure the mass flow rate of clean gases and gas mixtures in lower flow ranges. A capillary tube thermal mass flow controller adds an integrally mounted flow control valve to the flow body of the mass flow meter and bom monitors the mass flow rate and controls it to be equal to a set-point value selected by the user. ...


    By Sierra Instruments, Inc.

  • Advanced WESP designs assure superior gas cleaning performance

    Nowadays, many industries are facing formidable environmental challenges and there is a growing need for effective, economical gas cleaning and air pollution control equipment. Michael Beltran of Beltran Technologies, Inc. reports on a renewed interest in high-efficiency wet electrostatic precipitators (WESPs) and discusses their importance for controlling sulphuric acid mists and other ...


    By Beltran Technologies, Inc.

  • Hygienic design for the food & processing industries

    Gaskets, seals and rough pipe surfaces are potential bacteria havens and hygienic challenges for the food and processing industry. The solution? Hygienic design. Jürgen Hofmann unlocks a glass cabinet. “Look at this,” he says - it is a length of stainless steel piping, which has a short branch at ninety degrees with a bolted-on cover. “There used to be a sensor in here or a similar device, but it ...

  • Improving and maintaining the performance of your Heat Exchanger or Condenser.

    The usage of Heat Exchangers or Condensers is common in many processes across a wide range of industries. The Energy sector is no different, either in the Thermal Power Generation, Upstream and Downstream of the Oil and Gas including Petrochemical and Chemical plants; Heat Exchangers are used to cool of the steam or to pre-heat different liquid needed in the processes. The recurrent problem of ...

  • Operating Room - UVC lights provide infection control, green benefits

    Muskogee Community Hospital (Muskogee, OK) is using germicidal UVC (ultraviolet C) Emitters™ from Steril-Aire as part of an innovative infection control measure. The devices were installed in the air handling units and in custom-designed, ceilingmounted units in the surgical and procedural suites, marking the first time a hospital has used UVC technology in this way. Steril-Aire devices ...


    By E-CO

  • Case study: Langton residence

    SteriLight Still Helping Florida Homeowner… After 9+ Years The term “healthy home” has become a buzzword in recent years, but homeowner Richard Langton of Florida is ahead of the curve. Back in 2000, he decided to install a SteriLight ultraviolet C or “UVC” device in his home air conditioning system to clean the indoor air and prevent the growth of mold, ...


  • The role of robotics in the trenchless industry

    The official definition of a robot is “a machine or device that operates automatically or by remote control,” yet this does not really define the information and functions that the robots in the Trenchless Technology industry provide to engineers from local water authorities, municipalities and It can be argued that the first step towards what we know today as ‘robots’ was the use of tube ...


    By KATE PMO AG

  • Research papers: safe use of Microbubbles for removal of RO Membrane Fouling - Case Study

    For full downloadable report Abstract The authors have shown a dramatic improvement in cleaning efficiency when effervescent cleaning reagents are used in conjunction with bubbles created using a specially designed microbubble generator. One potential problem associated with this new technique ...

  • UVC: Florida hospital puts HVAC maintenance under a new light

    HVAC system downtime during coil cleaning can compromise humidity and temperature control, potentially leading to air quality or comfort problems. Florida Hospital has found that high-output ultraviolet-C lights installed in the AHUs reduce or eliminate coil- cleaning programs — yielding ongoing energy savings, a reduction in HVAC system maintenance, and the elimination of cleaning ...


    By E-CO

  • The Function and Purpose of Portable Dust Collectors

    Portable dust collectors are movable devices that are useful to decrease and collect contaminant substances from the air in your work environment, producing units and plants. Portable dust collectors are small devices and portable, which means they can easily be transferred from place to place. Structure The ...


    By ProVent, LLC

  • Improving energy efficiency: About oil fouling in refrigeration systems

    Introduction Most air conditioning and refrigeration systems have a mechanical compressor which relies upon lubricating oil to function. During the normal course of the refrigeration process, ½% to 8% of the compressor’s lubricating oil is circulated throughout the system along with the refrigerant. Since the early days of refrigeration and air conditioning technology, the ...


    By Power Knot LLC

  • What You Need to Know About Cyclone Dust Collectors

    Cyclone dust collectors are brilliant cleaning devices and once you have decided to use one, you must understand the job it does. A cyclone dust collector is different from other dust collectors, which is the first thing so you don’t get confused. Dust collectors remove dust particles as well as harmful pollutants flowing in the work environment. However, cyclone dust collectors are more ...


    By ProVent, LLC

  • Precipitator Solves Dryer Problem

    Plum Creek Manufacturing, Columbia Falls, Montana, installed a PPC Industries electrostatic precipitator to solve a direct fired dryer dust plugging problem. The electrostatic precipitator was installed in a very congested area and the project had to be done so the dryer was off-line a minimal amount of time. Plum Creek personnel relocated existing equipment, poured concrete footings, ran all of ...

  • Choose among membranes for RO desalination - Varied construction options available

    A wide variety of membrane types, sizes, construction options and techniques are available for removing salt from water. There are basically two types of commercial membranes used in RO applications today: cellulose acetate (CA) and thin film (TF). The former is considered an integral membrane, the latter a composite membrane. The following is basic criteria to compare one type to the other: ...


  • Ultrasonics: a sound mixing technology

    When liquid mixing, dispersing or homogenising is required in the lab, people tend to think of rotary mixers, although this traditional technology has limitations that can be costly both in time and material. Ultrasonics is the preferred innovative technology for various mixing applications in the lab. It combines extremely efficient and ultra effective high shear power with the added benefit of ...

  • Medical implant manufacturer succeeds with the QUADRANT SRS Silicone Series Thermal OXidizer

    Medical Implant Manufacturer Succeeds with Customized Air Pollution Control Equipment Many industries utilize silicone as an ingredient in their manufactured product. Silicone enhances the attributes of the product or helps to improve production characteristics. Whatever the reason may be, users of solvent borne silicone's all face very troubling issues when it comes to the selection of the right ...

  • The most efficient distance between two points

    When bulk material characteristics, process parameters or space restrictions call for a flexible screw conveyor Deciding on the single most efficient method to move your material from point A to point B is a matter of simple deduction: just match your material flow characteristics, process parameters and space limitations to the performance windows and dimensional restrictions of ...


    By Flexicon Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you