tube pump Articles

  • Tubing burst pressure

    Randolph Austin peristaltic pumps offer the unique ability to transfer materials without coming in contact with the pump. In a sense, the tubing is the heart of the pump. Using the wrong tubing for an application and you may have a ruptured line with a mess to clean up; selecting the right tubing for the job, results in a better experience. Of the many factors to consider in any application of ...


    By Randolph Austin Company

  • A Guide to Gas Detector Tubes. Your Questions Answered

    Gas detector tubes are easy to use, are low cost, and the method is intrinsically safe, allowing it to be deployed in all industries. Because detector tubes don’t require calibration, users see the benefits of this technology over electronic gas detectors due to their ease of ...


    By a1-cbiss

  • Syringe Pumps vs Peristaltic Pumps - Case Study

    Introduction Different applications require a pump, among all the options peristaltic and syringe pumps, are the most suitable. However, selection of the best is always a disjunctive. In general terms, laboratory and industrial process use peristaltic pumps. A user needs to know more about the systems and proper comparison of these technologies. In some cases is difficult to understand ...


    By Chemyx Inc

  • The Alternative to Pump and Treat

    Sometimes, an important technological advance begins with a small step – back! Such is the case with remediation of hydrocarbons from groundwater utilizing existing recovery and monitoring wells. For the past few years, state government has based decisions on the amount of clean up that they require by the risk posed to the environment. Risk Based Corrective Action, commonly called 'Rebecca' ...


    By Abanaki Corporation

  • Exergy analysis of a counter–flow Ranque–Hilsch vortex tube having different helical vortex generators

    In this study, thermodynamic analysis of a counter–flow vortex tube is made. Equations are derived for cold mass fraction (yr), entropy generation and irreversibility. Also, efficiency terms are defined based on the Carnot cycle by considering vortex tubes as both a cooling machine and a heat pump. Experiments are performed for various values of design ...


    By Inderscience Publishers

  • Low Flow Groundwater Sampling Using RotaPump Inertial Lift Pump

    This article tells you how to perform low flow groundwater sampling using a portable, surface-mounted pump with no decontamination required before each use and  no chance of cross contamination between wells. An inertial lift pump moves a dedicated (stored in the well) pumping tube rapidly up and down.  A one-way valve on the bottom admits water on the down stroke and ...


    By RotaPump, Inc

  • A novel atmospheric freeze-drying system using a vortex tube and multimode heat supply

    This article presents results of an experimental study of (AFD); atmospheric freeze-drying which uses a vortex tube to produce low temperature air, as an alternative to vacuum freeze-drying (VFD). An experimental setup was designed and built to permit simultaneous application of convection, conduction and radiation heat input to the drying material without heating it above the freezing point of ...


    By Inderscience Publishers

  • Peristaltic Pumping in Dairy CIP System - Case Study

    Challenge One of the largest UK manufacturers of fresh dairy products for the food industry was using air diaphragm pumps to dose peracetic acid into the final rinse water of both raw and finished CIP (Clean-in-place) routines.  CIP (Cleaning-in-place) is a critical hygiene process that helps to maintain the hygienic condition of the process line without the need for ...

  • Peristaltic pumping in dairy CIP system - Case Study

    Challenge One of the largest UK manufacturers of fresh dairy products for the food industry was using air diaphragm pumps to dose peracetic acid into the final rinse water of both raw and finished CIP (Clean-in-place) routines. CIP (Cleaning-in-place) is a critical hygiene process that helps to maintain the hygienic condition of the process line without the need for ...

  • Condenser Tube Cleaning System Custom Design & Fabrication

    Dominion Power is one of United States’ largest producers and transporters of energy, with a portfolio of approximately 25,700 megawatts of generation and 6,500 miles of electric transmission lines. Dominion serves more than 5 million utility and retail energy customers in 14 states. ...


    By Innovas Technologies LLC

  • Refrigerator condenser (shell and tube heat exchanger) cleaning case study

    In today's industrial environment of unceasingly consummates and improvement of equipment manufacturing technologies, heat-exchange and water circulation equipments become popular in the manufacture industry. The equipments can run efficiently at rated power if their systems have clean and unimpeded water channel. Once the water running equipments or systems were blocked by scale, it may cause ...


    By Mibo International Corp.

  • Whole Life Costs and pumping Technology – Peristaltics Increasingly Out on Top

    Untitled Document Whole life costs are playing an ever-more important role in pump selection by the water and wastewater industry. Interestingly, energy use is no longer the ...

  • Low recirculation rate evaporators

    Abstract Fin coil evaporators with enhanced internal tube surfaces allow for optimum performance with a minimal overfeed rate. Reducing the overfeed rate requiresless pumping power and smaller line sizes to the evaporator. Additionally, less compressor power is required for the same refrigeration capacity because the wet suction line pressure drop is reduced. Lower compressor power results ...


    By Evapco Inc.

  • Selecting a pump for sea water reverse osmosis

    Reverse osmosis (RO) desalination has become a significant process used in the purification of water. Selecting the correct pump is a significant step in a well designed and properly operating pumping system. Although the pump is a relatively small part of the overall cost of an RO system, expenses resulting from downtime and inefficiency can quickly diminish the productivity of the RO system and ...


    By Cat Pumps

  • Hand-pump subsurface arsenic removal: the effect of groundwater conditions and intermittent operation

    Hand-pump subsurface arsenic removal (SAR) has been investigated in rural Bangladesh with different groundwater conditions and intermittent operation modes. Multiple injection-abstraction cycles were performed after injection of 1 m3 of aerated water. From these experiments it can be concluded that hand-pump SAR, in the traditional injection-abstraction design, does not provide drinking water ...


    By IWA Publishing

  • Verderflex Peristaltic Industrial Pumps excel in diverse applications

    Verderflex Industrial peristaltic pumps are extremely robust pumps, ideal for heavy duty operations on intermittent or continuous duty cycles. They are a simple to use, easy to control, versatile and reliable way to pump liquids. Verderflex Industrial pumps can be used in a broad range of applications: Anaerobic Digestion Sludge Transfer Verderflex pumps were specified due ...

  • Nothing phases T-T controls case study

    On Thursday 24th March 2011 a London Underground tube line was suspended after a station was flooded by water leaking from the fountains at Trafalgar Square. Contractors working for the Greater London Assembly accidentally chopped through a section of water pipe which feeds the fountains. The London fire brigade was called shortly after 10am with one engine on the scene to pump out water which ...


    By T-T Pumps Ltd.

  • Oil spillage

    An area of specialisation is the supply of pumping solutions based around their standard product range, but with a complete system designed to suit the end user’s specifi c requirement. Autoclude were approached by an environmentalengineering company who had to recover diesel fuel which had leaked from storage tanks and spread over a wide area. To limit the environmental damage and recover the ...

  • London underground water recycling

    Cockfosters Tube Washing Facility This system was used to wash tube trains for the London Underground. Aquaco provided them with a 10,000 litre and an 18,000 litre system including dual pump set, two ground filters and a UV disinfection ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you