tunable diode laser Articles

  • Low level moisture measurement in Natural gas using a Lunable diode laser absorption spectroscopy (tdlas) based laser case study

    Introduction The measurement of water vapor in natural gas has long been of industrial importance, and has been addressed by a variety of analytical techniques over the years. Chief among these techniques has been the quartz crystal microbalance (QCM) based analyzers. The QCM technology is still the workhorse for production and pipeline applications, and the technique is considered by most ...

  • Introducing LaserGas III SP CO – a combustion analyzer for rough environments

    NEO Monitors unveils the industry’s most compact CO combustion analyzer suitable for the most demanding environments. LaserGas III CO includes measurement of CH4, H2O and temperature in one single unit designed to reduce risk. Based on decades of experience and customer feedback, NEO Monitors has designed an Ex-d certified tunable diode laser (TDLS) analyzer. The instrument is ...


    By NEO Monitors AS

  • Laser gas detection is now cheap, fast and reliable

    Laser based gas detectors are now being used in a wide variety of applications for process and quality monitoring, and safety and environmental compliance. The reasons are that laser detectors are more reliable and less expensive than alternative solutions. Laser detectors combine semiconductor tunable diode lasers (TDL) and optical fibres developed by the telecommunications industry with ...


    By Boreal Laser Inc.

  • OEM solutions help to popularize TDLS

    The latest case study published in AWE Magazine (March 2016 Edition) focuses on trends in gas detection solutions based on Tunable Diode Laser Spectroscopy (TDLS). OEM solutions based on TDLS are offered at low costs for high volume applications, and are customized to meet specific application demands. Read and download the complete case study ...


    By Axetris Ag

  • On Line Measurement of Oxygen: Review and New Developments

    Keywords Oxygen. Paramagnetic, Zirconia, Tunable Diode Lasers Abstract Oxygen is vitally important to the existence of animal life, not only for respiration, but also for the many aspects of the combustion reaction (power generation, vehicular movement, heating) and process control, safety and quality. Continuous measurement techniques are correspondingly ...

  • Fluoride Emission from Anode Butts in a Cooling Tunnel

    Abstract Nordic Aluminium has been trying out a cooling tunnel for hot anode butts in order to lower the fluoride content of the working environment. The cooling tunnel is connected to the Fume Treatment Plant so that it has forced suction from it. The purpose of this study is to evaluate the effectiveness of the tunnel in removing HF emissions and make suggestions on how to make the tunnel ...


    By Boreal Laser Inc.

  • New Process Gas Analyzer for the Measurement of Water Vapor

    KEYWORDS TDLAS, WMS, Laser Spectroscopy, Water Vapor Measurement, Gas Analyzer ABSTRACT A new analyzer for the measurement of water vapor concentration based on Tunable Diode Laser Absorption Spectroscopy (TDLAS) was developed. The water-vapor line at 1854-nm was selected for the measurement, and the performance of the system was evaluated on different ...

  • TDLAS Gas Detection Instrumentation

    PKL Technologies Inc. manufactures tunable diode laser (TDLAS) based gas detectors and monitors. Spectra-1 open path gas sensors are used in a variety of environmental and safety remote sensing applications. Spectra-1 gas sensors have been designed in a compact, easy to use, robust and portable format. Spectra-1 has been developed using proprietary hardware and software, to produce a low cost ...


    By PKL Technologies Inc.

  • Remote sensing of emissions: new technologies and recent work

    The Second International Workshop on Remote Sensing of Emissions: New Technologies and Recent Work was held April 1-3, 2008. The workshop was sponsored by the U.S. Environmental Protection Agency's (EPA) Office of Air Quality Planning and Standards at Research Triangle Park (RTP), Office of Research and Development (RTP), and Office of Solid Waste and Emergency Response (HQ). At the workshop, ...

  • TDLS for a Cleaner Environment - Case Study

    In this case study for Axetris Laser Gas Detection (LGD) products, Urs F. Boegli – Senior Application Engineer - looks at the historical perspective on the development of environment regulation and emission control technology. The European Community has published several directives to harmonize the legislation on industrial emissions. These include the Large Combustion Plant Directive ...


    By Axetris Ag

  • Demonstration of an Ethane Spectrometer for Methane Source Identification

    ABSTRACT: Methane is an important greenhouse gas and tropospheric ozone precursor. Simultaneous observation of ethane with methane can help identify specific methane source types. Aerodyne Ethane-Mini spectrometers, employing recently available mid-infrared distributed feedback tunable diode lasers (DFB-TDL), provide 1 s ethane measurements with sub-ppb precision. In this work, an Ethane-Mini ...


    By Aerodyne Research, Inc.

  • Real Time Measurments of Acetylene in Ethylene Manufacturing Process

    Keywords Tunable Diode Laser, Wavelength Modulation Spectroscopy, Analyzer, Acetylene, Ethylene, Acetylene Converter Abstract The analyzer, based on near infrared Tunable Diode Laser Absorption Spectroscopy (TDLAS), was developed for the measurement of acetylene in process streams. Measurements of acetylene were made as under laboratory conditions and in ...

  • Model 5100 Verification/Validation case study

    Background Many sensors used in gas analyzer systems come into direct contact with the process gas, and there is the potential for degradation over time especially with streams that contain contaminants like glycol, moderate to high levels of hydrogen sulfide etc. With sensor degradation, the analyzer response characteristics change resulting in inaccurate readings. In order to ...

  • Continuous measurement of Process oxygen for Claus sulfur recovery unit (sru) start-ups and shut-downs case study

    During start-up and shut-down, any time a sulfur recovery unit (SRU) transitions from ambient temperature through fuel gas warm up to the introduction of acid gas, measurement of 02 stoichiometry is critical. Historically, operators have manually taken samples using a portable electrochemical type Os analyzer. While giving more or less satisfactory results, the requirement for more stringent ...

  • Measurement of Sulfur in Refinery Flare Gas Streams for Compliance with EPA SubpartJ(a) Regulations

    The Challenge Measurement of high range and low range H,S in refinery flare gas streams for compliance with EPA regulation NSPS Subpart J(a). The rule has placed an extra investment and operational burden on petroleum refineries to meet the regulatory requirement. AMETEK offers an economical solution to meet the challenge with an emphasis on lower capital and operating cost along with ...

  • Continous Emission Monitoring (CEMs)

    Presented in Track B1: CEMs at EUEC 2011,January 31 Phoenix, Arizona   B1.1  | Particulate CEM for wet FGD plant William Averdieck |  Managing ...

  • Smart LDAR — more cost-effective?

    On December 19, 2008, EPA issued a final rule establishing a voluntary Alternative Work Practice (AWP) to detect leaks of volatile organic compounds (VOC) and hazardous air pollutants (HAP) from process equipment (FR Vol. 73, Number 246), thereby providing the regulated community additional flexibility in complying with leak detection and repair (LDAR) requirements. The AWP allows owners or ...


    By Trinity Consultants

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you