turbidity reading Articles

  • What is turbidity?

    Turbidity measures the relative clarity of a water sample. It is determined by the amount of scattering that occurs when a light source is shined through a water sample. Light scattering is caused by increased concentrations of suspended particles in water that are not individually visible to the naked eye, which can give the water a cloudy appearance. This parameter is used as a general ...


    By MANTECH Inc.

  • Technical Focus: Turbidity as Control for Primary Settlement

    Turbidity is a very useful tool when regarding control within the primary settlement stage of water treatment. By utilising turbidity as a control variable during this stage of the process you  can enable a more rapid response to variations in load  and provide early warning  to operators of equipment malfunction before it’s too late; allowing for immediate action to be taken ...


    By Partech (Electronics) Ltd.

  • New MANTECH Turbidity Flow Cell and Method - Case Study

    Man-Tech’s Turbidity Flow Cell and Method only requires calibrations every 1-3 months. Man-Tech’s automated turbidity has many benefits that make it work well: the sample is mixed to ensure homogeneity, excellent and stable calibrations, easy to add additional parameters including pH, conductivity, alkalinity, colour, and flouride, among other reasons. Why does ...


    By MANTECH Inc.

  • Exclusive: Introducing the new TurbiTechw2 D-ISO turbidity sensor

    We have some exciting news and you are the very first to read about it! This 2nd – 3rd November at the WWEM Show in Telford we will be launching the latest sensor in ...


    By Partech (Electronics) Ltd.

  • A study on the estimating of sediment concentration with turbidity and acoustic backscatter signal for different sediment sizes

    Turbidity and acoustic measurement are alternative indirect methods to determine sediment concentration. Acoustic Doppler velocimetry can be used to estimate suspended sediment concentration (SSC) with the signal-to-noise ratio (SNR) in the water. In this study, particles size affecting turbidity and SNR values was investigated using four different sediment size groups (0–50, 50–100, 100–200, ...


    By IWA Publishing

  • Optimizing filter backwashing

    Optimum filter performance has become a critical component of surface water treatment. For conventional and direct filtration systems, LT1ESWTR requires the combined filter effluent turbidity be less than or equal to 0.3 NTU’s for 95% of the readings taken each month. At no time may the readings exceed 1 NTU. As regulations change and filtration is pushed toward the lower limits of turbidity ...


    By Entech Design, Inc.

  • Analytical Technology Helps Britannia Food Ingredients Ensure Safe Wastewater Disposal

    Britannia Food Ingredients Ltd. is a speciality fats company for the chocolate, confectionery, biscuit and snack food industries. The company are specialists in providing the demanding fat formulations found within chocolate, ice cream, bakery and snack food products. Located at Goole, East Riding of Yorkshire, England, the business was formed in 1996 and produces a range of oils and fats ...

  • Stormwater Solids Reduction for NPDES Permits

    Finally obtaining a National Pollution Discharge Elimination System (NPDES) Permit is often a relief but is by far not the end of the story. Meeting the requirements of that permit often proves to be quite difficult and stiff fines are freely doled out to those who fail to meet regulatory limits. For one Midwest jet propulsion manufacturing facility, the issue of total daily solids discharge ...

  • Polishing of treated palm oil mill effluent (POME) from ponding system by electrocoagulation process

    As the ponding system used to treat palm oil mill effluent (POME) frequently fails to satisfy the discharge standard in Malaysia, the present study aimed to resolve this problem using an optimized electrocoagulation process. Thus, a central composite design (CCD) module in response surface methodology was employed to optimize the interactions of process variables, namely current density, ...


    By IWA Publishing

  • National instruments features Watertectonics` Waveionics user interface and control system

    Using National Instruments products like LabVIEW and Compact FieldPoint Controllers, WATERTECTONICS has developed a user interface for the WaveIonics electrocoagulation system that is flexible, automated, and robust. With the tight integration between NI hardward and software, WATERTECTONICS was able to test coding extensively on a PC before deploying it to a system. Plus, it was easy to adapt ...


    By Water Tectonics, Inc.

  • How & Why We Measure Suspended Solids

    In case you weren’t sure, Suspended Solids is simply a density measurement used to describe exactly how much waste sludge and particles are in the water, and is measured in milligrams per litre (mg/l), grams per litre (g/l) or percentage solid (%). 1000mg/l = 1g/l = 0.1%. It is used to calculate the amount of material, or load, in a wastewater or industrial system. Suspended Solids ...


    By Partech (Electronics) Ltd.

  • Southern water MLSS case study

    Southern Water has recently installed eight new Partech Turbi-Tech 2000LA systems at its East Worthing water treatment works for measuring Mixed Liquor Suspended Solids (MLSS) in the aeration tanks. This new installation takes Partech’s Turbi-Tech 2000LA and 7200 Series Monitor a step further in becoming the standard instrument for measuring mixed liquor throughout the whole of Southern ...


    By Partech (Electronics) Ltd.

  • Dairy Crest – Dairy Effluent Treatment Case Study and Partech Water Instruments

    In order to comply with environmental regulations, the food and beverage industry relies heavily on constant monitoring and control of wastewater and effluent, before discharge from the plant. Additionally, if process plants fail to be vigilant when it comes to monitoring all areas of waste treatment, the results can be unsuccessful. Partech’s water instruments are ...


    By Partech (Electronics) Ltd.

  • Can harmful algal blooms be predicted?

    Summer 2015, as the eighth month of the year approaches (August), we are starting to hear and read in the news about sudden algal blooms occurring in freshwater lakes and marine environments. Many popular beach resorts have put up warning signs proclaiming the water is unsafe for recreational purposes. This is an understandable precautionary measure since phytoplankton abundance or more ...


    By LG Sonic

  • Wastewater engineers go with the flow

    The efficiency of maintenance work has been improved by water treatment engineers employing Intellisonde monitors in their final effluent. Designed primarily to measure water quality, the Intellisondes also measure flow, and this reading is being used to detect the accumulation of debris that necessitates a maintenance visit. Wastewater treatment efficiency is often measured by the analysis of ...


    By Intellitect Water Ltd

  • Partech Case Study: Effluent Water Quality Monitoring at an Open Case Coal Site

    Merthyr Tydfil in Wales is home to the massive Ffos-y-fran land reclamation scheme by Millar Argent, where over 10 million tonnes of coal will be extracted in the next fifteen years! So what’s the point of the land reclamation scheme? The purpose is to restore the land to its former principle use and Partech are helping with the discharge monitoring on site. You ...


    By Partech (Electronics) Ltd.

  • On-Line Nitrate/Nitrite Probes for BNR Process Control

    ABSTRACTReal time nitrogen monitoring plays an increasingly important role for the successful biological nutrient removal at wastewater treatment plants. Though traditionally dissolved oxygen has been the main process control parameter a greater understanding of the biological mechanisms and process conditions like nitrite/nitrate concentrations to achieve lower effluent values becomes necessary, ...

  • The Importance of Water Testing After Natural Disasters

    In the aftermath of a natural disaster, particularly earthquakes, infrastructure could be damaged and a safe source of drinking water is often not available. This may be due to damaged pipes or water supplies becoming contaminated. Our colleagues at Oxfamstate; “In the initial phases of an emergency it should be assumed that all water sources are contaminated ...


    By DelAgua Group

  • Antifouling System Reduces Algal and Biological Growth on the In-Situ TROLL 9500 Water Quality Instrument

    Abstract New regulations regarding clean water have increased the need for long-term environmental monitoring. As water quality sensor technology improves and becomes more stable, the limiting factor in these projects becomes biological and non-biological fouling of instrumentation. Biofouling of environmental equipment increases site visits and maintenance, which elevate monitoring costs. ...


    By In-Situ, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you