turbine monitoring Articles

  • Reduced Emissions for Landfill Gas Installations

    The use of landfill gas as a source of renewable energy is increasing. For environmental and safety reasons, the owners of the waste storage sites have to strictly monitor and control the construction, operations, and emissions generated. Sulzer offers solutions to control these emissions within the limits given by the government. Landfill gas is similar to natural gas, but it is created by ...


    By Sulzer

  • Wind turbine controlling of the future

    Higher, more robust, more reliable: Parallel to the growing requirements for wind turbines, the requirements for monitoring sensors grow as well. But how can wind sensor manufacturers fulfil these wishes? And how should a future wind sensors look like? After analysing the current conditions and trends on the wind energy market, our CEO Klaus Hirzel compiled a wish list for future wind sensors. ...

  • Are wind turbines economically viable in Britain?

    If Britain establishes wind energy as their main energy source, they will be able to create a large number of new job opportunities. This can provide a huge influx of job opportunities in the short run since the implementation of wind turbines require a lot of manpower. Moreover, the maintenance of these wind farms can give life to a considerable amount of sustainable jobs. Monitoring the wind ...


    By Stanford Magnets

  • Gas turbine compliance emissions test case study

    CKwas retained by Lake Road Generating Company, LP (Lake Road) to conduct a compliance emissions test program on three combustion turbine and heat recovery steam generators (CT/HRSG). The purpose of this program is to demonstrate that emissions from the CT/HRSGs are within the emission limits specified in the operating permit issued by the Connecticut Department of Environmental Protection ...


    By CK Environmental, Inc.

  • Suzlon, Vestas announce new turbine orders

    Suzlon Energy (Pune, India) and Vestas Wind Systems A/S (Randers, Denmark) have announced new orders for wind turbines and associated equipment, in Vestas’ case the first European orders for its new V112 3-MW model. Vestas received an order from Germany’s Prokon to supply 17 of the V112 3-MW units for installation at the Krackow project in Germany’s ...

  • CU-Boulder leading study of wind turbine wakes

    While wind turbines primarily are a source of renewable energy, they also produce wakes of invisible ripples that can affect the atmosphere and influence wind turbines downstream -- an issue being researched in a newly launched study led by the University of Colorado Boulder's Julie Lundquist, assistant professor in the atmospheric and oceanic sciences department. The study, called the Turbine ...


  • Palmdale Water District Wind Turbine Project

    In response to the 2001 California energy crisis, Black & Veatch acted as the owner's engineer through the construction and commissioning phases of the largest net-metered wind energy project in the United States. The California energy crisis in 2001 made headlines around the world. The country's most populous state was caught in a power delivery squeeze and was beset with runaway ...


    By Black & Veatch Corporation

  • Biofuels Gas Monitoring

    The Customer The Company is one of the world’s leading developers and producers of advanced fuels and green chemicals. The Process The Company uses a gasification process that breaks down wood chips, waste and other feedstock using plasma technology. The process produces a uniform synthetic gas (syngas) that is used to power their turbine engines. ...

  • Finite element analysis of turbine generator rotor winding shorted turns

    Abstract Online magnetic flux monitoring via permanently installed air-gap flux probes is a well- established technology to determine the presence of shorted turns in a turbine generator rotor winding. Flux measurements are normally performed using flux probes installed in the machine air gap (on a stator wedge) and connected to portable or permanently installed instruments. In this ...

  • Stack gas VOC monitoring

    POLLUTION S.r.l. manufactures POLARIS FID analyzer, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...


    By Pollution Srl

  • The vibration monitoring evolution

    A recent report from Markets & Markets estimated that demand for vibration monitoring systems will reach nearly $1.5 billion by 2020. That’s a staggering increase of around 50% compared with today – with a compound annual growth rate (CAGR) of more than 6.5%. Is this growth a big surprise though? As a company that has seen first hand the rapid evolution of the ...


    By Hansford Sensors

  • Monitoring Hydroelectric Dam Sumps

    TD-4100 Oil in Water Monitors for Hydroelectric Dam Sumps TD-4100 Oil in Water Monitors for Hydroelectric Dam Sumps Hydroelectric Dams produce electric power via the force of the water flowing through the dam. There are numerous sources for oil spillage: The hydroelectric turbines are lubricated by standard lubrication oils; The very large water control valves are normally ...

  • New Condition Monitoring Frame Agreement

    Arise Windpower and Brüel & Kjær Vibro enter into a frame agreement for remote condition monitoring of wind turbines Arise Windpower are very pleased to have entered into a Frame Agreement with Brüel & Kjær Vibro for the supply of condition monitoring solutions for wind turbine applications. "We believe that using one common condition monitoring system ...


    By Brüel & Kjær Vibro GmbH

  • Permit Compliance Monitoring for the Power Generation Industry

    The Clean Air Act Amendments (CAAA) of 1990 authorized EPA to develop regulations requiring facilities to monitor the adequacy of emission control equipment and plant operations. This paper discusses the various methods available for coal-fired power plants and gas turbine installations to demonstrate a reasonable assurance of facility compliance with emission limitations, and ensure that control ...


    By Mostardi Platt Environmental

  • Continuous, Centralized Monitoring Drives O&M Optimization

    In a survey conducted by Wind Energy Update this year, 80% of wind turbine owners indicated they take either a predictive or preventative approach to maintenance. Furthermore, 77% indicated that they deploy Condition Monitoring Systems (CMS). “If you can leverage data to increase plant performance by even 1%, you are looking at significant impacts to your revenue”, EDF’s ...

  • Continuous biogas monitoring with AEMS in South Korea

    Application Biogas research projects Equipment AEMS biogas analyser Location South Korea Customer KEPCO Research Institute Requirement The customer ...


    By Geotech

  • Reliable silica monitoring supports power station efficiency

    West Burton B CCGT is a Combined Cycle Gas Turbine power station near Nottingham in the UK. It has three open-cycle gas turbines capable of generating enough electricity for approximately 1.5 million UK homes. In common with all combustion based power stations, the CCGT has a requirement to monitor silica levels in the Plant’s water and steam processes. Sean Todd, the Plant’s Control ...

  • In-situ continuous emissions monitoring & regulatory compliance

    As environmental scrutiny has risen and regulation has tightened in recent years, the importance of having accurate information on the environmental performance of your power plant has increased. After all, if you want to manage something, you need to be able to measure it. The analogy is obvious; you wouldn't start a diet without first investing in a set of scales. So it is with Continuous ...

  • Petrochemistry: Monitoring the magnetic clutch of a boiler fan - Case Study

    Equipment, Context:   The manufacturing site is a steam cracker in Europe operating 24 hours 7 days a week. To ensure its production, the plant has three boilers supplying in vapor several steam turbines and furnaces. The monitored equipment is a fan linked to a boiler. Fan is equipped with a magnetic-clutch allowing a driving ...


    By Wi-Care

  • Port of London Authority Tidal Monitoring System - POLATIDE 5: Detailed - Case Study

    Introduction: Valeport and OceanWise have designed and delivered a complete tidal monitoring system, including tide gauges, telemetry equipment, servers, databases, system control, data management and display software, to the Port of London Authority. The system was installed in October 2013 and rigorous testing completed in February 2014.  Background: ...


    By Valeport Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you