turnkey air pollution control Articles

  • Canadian biofuel manufacturer requires air pollution control

    With the expected rise in oil prices in the next few years, the increasing instability of the world oil supply, and the increasing demands from the EPA for cleaner fuels and production processes, Food and Plant based Ethanol production is on the rise. Along with this rise in production comes an increased requirement for Air Pollution Control Solutions in the Bio-Fuel’s market. Catalytic ...

  • High-temperature air pollution control technology

    Based on 35 years’ experience working for the environment, French company Maguin has developed the Cercat filter for high temperature air pollution control. David Gambier describes the technology and its potential use in the glassmaking industry.Maguin has been present in the waste thermal treatment field since the 1970s, offering customers innovative and state-of-the-art concepts. The company’s ...

  • Pollution monitoring in Cement Industry

    The rising use of waste based fuels in the cement industry, both for economic and Environmental objectives, combined with the strengthening of air emission regulations around the world is pushing many operators to face a wider list of pollutants to monitor this, with associated costs. The design of appropriate solutions meeting local regulation is the key to maximize the cost benefit of the fuel ...


    By Environnement S.A

  • A Breath of Fresh Air for Your

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With over two decades of proven success, catalytic oxidation is a popular method for controlling volatile organic compound (VOC) emissions.During the past 25 years, industry has made progress in ...


    By The CMM Group, LLC

  • Case study - RTO: Efficient and reliable styrene control technology

    Problem A producer and supplier of corrosion resistant piping systems was looking to improve the reliability and lower operating expenses of an existing air pollution control system at their facility. During their manufacturing process, centrifugally cast mortar pipe systems are reinforced with a fiberglass polymer. This makes the pipe ideally suited for most corrosive piping applications ...

  • Case study - Fiberglass polymer emissions: RTO control technology

    OVERVIEW A producer and supplier of corrosion resistant piping systems was looking to improve the reliability and lower operating expenses of an existing air pollution control system at their facility. During their manufacturing process, centrifugally cast mortar pipe systems are reinforced with a fiberglass polymer. This makes the pipe ideally suited for most corrosive piping ...

  • Filter technology to meet evolving regulations

    Maguin has developed the Cercat filter for high temperature air pollution control. In this article, David Gambier and Hélène Real outline the technology, as well as installations planned for 2009. Maguin has been present in the waste thermal treatment field since the 1970s. The company’s knowledge has been built through the turnkey supply of thermal treatment units for different kinds of products ...

  • Case study - Printed circuit board emissions

    Overview One of the world's largest printed circuit board (PCB) manufacturers was required to install air pollution abatement equipment to control the VOCs emitted during their soldering and coating process. Three main considerations were important to the customer: The need for a system with a competitive capital cost and the lowest possible operating cost ...

  • Regenerative Thermal Oxidizers…What You Should Know.

    Within industry today, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new.  In response to Congressional guidelines passed in the 1970’s, a number of companies with VOC emissions have been operating air pollution control systems of one type or another for 25 years or more.  These guidelines have been revised and added to as the years ...


    By The CMM Group, LLC

  • Catalytic Oxidizers…What You Should Know.

    Within the U.S., depending upon specific plant operations, geographic locations, etc.,  many companies concerned with controlling VOC emissions have been operating air pollution control systems for years.  However, due to business expansion, plant modifications or recent changes in EPA guidelines, an increasing number of companies are now finding it necessary to install new emission control ...


    By The CMM Group, LLC

  • Case study - Mobile remediation system

    OVERVIEW A large consulting and contracting firm owns and operates several ex-situ Thermal Desorption Units (TDUs). Each single-load Thermal Desorption Unit has the capacity of desorbing 15 tons of soil per hour at a temperature of 400°F - 900°F. These Thermal Desorber Units have been designed to operate on both chlorinated and non-chlorinated RCRA, CERCLA, and private industry ...

  • The Dangers of Hydrogen Sulfide and Filtration with Activated Carbon

    Hydrogen sulfide (H2S) is a poisonous, highly flammable, colorless gas that is associated with a ‘rotten egg’ odor. As stated by cchealth.org, “hydrogen sulfide is created naturally by decaying organic matter and is released from sewage sludge, liquid manure, and sulfur hot springs.” It also is a by-product from industrial processes such as natural gas processing, ...


    By General Carbon Corp.

  • Chlorine gas protection - Case Study

    Application As part of a scheme to bring safe drinking water to 1.5 million people in Omdurman City, part of Greater Khartoum, Biwater International was appointed by the Government of Sudan to undertake a major turnkey design and construction project. Chlorine is the conventional means of water disinfection, so Biwater brought in ERG to design and manufacture the emergency gas ...

  • Efficiency Bonus From Ford’s Emission-Beating Ovens

    EFFICIENCY BONUS FROM FORD’S EMISSION-BEATING OVENS When Ford decided it was time to refurbish and upgrade two primer ovens and systems at its Dagenham plant in Essex, UK, the company looked to the future. Against a worldwide background of rising concern over environmental issues and pollution, Ford decided to make use of the opportunity to reduce VOC emissions. They aimed for a system ...


  • Case study - Heat exchanger retrofit

    Overview A manufacturer of insulation films for the electronics industry needed to evaluate the capabilities of four existing oxidizers that treated emissions from its coating lines. The company was concerned that, due to oxidizer deficiencies, it would not meet regulatory requirements. The oxidizers had been manufactured by two different companies. One of them was no longer in business; ...

  • Increasing Environmental Commitment in Supply Chain Performance Management

    In 2015, China reinforced its environmental policies and laws, strengthening air and water pollution controls. Trend toward Environmental Commitment Almost immediately, polluters found themselves subject to litigation, for example, a group of chemical companies subjected to compensation demands for about US$26 million (1). China is supporting victims of ...


    By SGS

  • Superfund Remediation: The Key to Land Reuse Case Study

    The technology is ready and, with state and federal tax credits waiting, the economics look better than ever: New Jersey, one of the first states to be industrialized, finds itself plagued with the contaminated aftermath of pre-EPA industries: soil contamination. From superfund sites to the gas station whose underground storage tank has been oozing for the last 20 years, every ...


    By CR Clean Air Group, LLC

  • Renewable Energy Projects on Contaminated Property | Managing the Risks Part II

    Part II of Renewable Energy Projects on Contaminated Property | Managing the Risks The First entry can be found at Part I Risk and Exposures in the Life Cycle of a Project The typical renewable energy project involves multiple parties: tax equity investors; equity investors; local utilities; engineering, procurement, ...

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you