turnkey flue gas treatment Articles

  • Gatineau Sewage Treatment Plant, Gatineau, Quebec, Canada

    Project No. 1 Industrial Boiler Application A FLU-ACE waste heat recovery system installed to process all flue gases from three boilers. The system recovers up to 3.5 mmBTU/h of waste heat which is re-used for heating the digester sludge. The main fuel for the boilers is recycled methane based sewage gas generated from the plant’s anaerobic digesters. 'The installation ...

  • Biomass fired thermal oil heater case study

    This 12 MWth output Biomass Power Plant is one of the turnkey products of Biomass Power. The plant was fully commissioned in December 2006. The system has a capacity of 12 MW thermal output producing up to 10MWth of 300°C 10 Barg pressure hot oil, up to 10 tonnes per hour of steam and 2 MWth of 200°C hot air. This is all achieved from one grate heating three separate heat exchanges. The ...


    By Biomass Power Limited (BPL)

  • 4.5 MWe Refuse Derived Fuel to Energy Plant Case Study

    This 4.5 MWe Biomass Power Plant is one of the turnkey products of Biomass Power. The plant has a capacity of 24 MW thermal and rated at 4.5 MWe producing 35,476MWh of green electricity per year, 100% of which is exported to the grid. The fuel used is segregated biomass from a commercial and industrial waste collection business. The fuel is produced by removing some of the recyclable material ...


    By Biomass Power Limited (BPL)

  • What are the best companies for Zero Liquid Discharge Equipment and Technology?

    With an increasing push for environmental protection, many industrial facilities and effluent regulators are making decisions that lessen their impact on the environment and human health. Changes and implementations are constantly being discussed and met both nationally and internationally to change the way industrial facilities discharge waste, and it is important to know which companies are the ...


    By SAMCO Technologies, Inc.

  • How much will a zero liquid discharge system cost your facility?

    With increasing stewardship of environmental protection, both nationally and internationally, many industrial facilities and effluent regulators are strengthening strategies to reduce industrial process waste by implementing zero liquid discharge (ZLD), a process that limits liquid waste at the end of your industrial process to—as the term suggests—zero. A ...


    By SAMCO Technologies, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you