turnkey gas analysis Articles

  • SPGAS: Specialty gas analysis software

    About SPGAS SPGAS is a user-friendly, turnkey FTIR software package designed specifically for the analysis of gaseous constituents. While providing all of the control features of a standard FTIR software package for Bomem spectrometers, SPGAS also provides the ability for 24/7/365 operation of the IRGAS analysis package. SPGAS is designed to save spectral files from each day of ...


    By CIC Photonics, Inc.

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Oil & Gas Leakage Detection Contractors

    RADS (Remote Aerial Detection Systems) teamed with market leading vendors to supply state-of-the-art Intelligence Surveillance and Reconnaissance (ISR) and security equipment. RADS is a US-based top-tier Technology Integrator that serves international commercial and government customers across the world. Unlike the large US defense contractors, RADS is independent and can operate with agility ...


  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

  • FTIR resolution requirements for industrial gas analyses

    FTIR Spectroscopy FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epitreatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D faciltities, FTIR is applied to combustion ...


    By CIC Photonics, Inc.

  • Multiple gas impurity analyses and verification for semiconductor process tools

    With the increased emphasis on the purity of cleaning, etching and treatment gases by the semiconductor industry, advanced analysis instrumentation is required to monitor the electronic specialty gases and to verify the performance of process tools and components. This paper describes new instrumentation and software specifically designed to accomplish ppb level gas analyses in times as short as ...


    By CIC Photonics, Inc.

  • Rectify dry cycling of gas boilers and reduce energy costs by 25%

    Building engineers, energy and facilities managers tend to overlook that many gas boilers waste energy through dry cycling when they are not actively contributing to the building heating and hot water demand. It is often thought that existing building management systems (BMS) and building energy management systems (BEMS) are optimising the boilers to remove dry cycling. However, the BMS is ...


    By Vital Efficienci Ltd.

  • Continuous monitoring of moisture present inside a process chamber

    Problem Statement Moisture inside a process chamber is a big silent killer during wafer production. When production yield goes down, it is hard to pinpoint the source of the problem. Most of the time wafers need to be sent to labs for analysis, while production is stopped. If the problem is related to a high level of moisture inside the reactor, there are several factors that can cause ...


    By CIC Photonics, Inc.

  • UCMR2 - Unregulated contaminant monitoring regulation 2 application notes

    The EPA UCMR2 program was developed to monitor US drinking water sources for currently unregulated compounds. UCMR2 sampling will occur during 2008-2010. Horizon Technology has developed turnkey solutions for some of these methods, that address UCMR2 requirements. The applications for EPA ...


    By Horizon Technology, Inc.

  • Monitoring the performance of moisture purifiers for process gases

    Problem Statement Moisture purifiers are a big aid in keeping moisture levels under control inside a process chamber. They are provided by manufacturers with certain life expectancies, which vary depending on the moisture content of the gas being purified. As a result, it is difficult to determine which gases have a high moisture content and which moisture purifier is becoming ...


    By CIC Photonics, Inc.

  • Detection and measurement of toxic gases from destructive testing of batteries

    Problem Statement New formulations of organic-compound-based batteries for vehicle use must be tested for release of potentially harmful and toxic gases if crushed in accidents. Potential gases include hydrocarbons, fluorocarbons, and hydrogen fluoride, released within seconds of an incident. Actual time-resolved and quantitative data are required from destructive testing to ascertain ...


    By CIC Photonics, Inc.

  • Detection of early PFA seals (perfluoroalk-oxyethylene) degradation exposed to process gases inside a reactor chamber

    Problem Statement Replacement of PFA seals inside the reactor chamber is performed according scheduled maintenance and life expectancy of the seals. Early degradation of seals goes completely undetected until there is a complete failure of the seal, letting atmospheric contaminants inside the reactor and forcing an unscheduled reactor downtime. IRGAS ...


    By CIC Photonics, Inc.

  • Float Realty Trust – Falmouth, MA - Case Study

    At an office/industrial park on Cape Cod, owners wanted to explore potential savings from rooftop photovoltaic electricity in a single-story industrial facility. In two of the facility’s buildings, people work daily designing and manufacturing scientific instruments for oceanographic research and monitoring of climate change. As a research institution, one of the main drivers for the ...

  • Catalytic Oxidizers…What You Should Know.

    Within the U.S., depending upon specific plant operations, geographic locations, etc.,  many companies concerned with controlling VOC emissions have been operating air pollution control systems for years.  However, due to business expansion, plant modifications or recent changes in EPA guidelines, an increasing number of companies are now finding it necessary to install new emission control ...


    By The CMM Group, LLC

  • A Dressing for Success

    What started out as a signature dish in a restaurant more than 65 years ago has today become a company with more than 400 varieties of salad dressings and sauces. When Ken’s Steakhouse began in 1941, the owners were in search of a special salad and dressing to go with their steaks. The salad dressing soon rivaled the steaks in popularity—and a new company was born. Today, the company has grown to ...


    By World Water Works, Inc.

  • A Breath of Fresh Air for Your

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With over two decades of proven success, catalytic oxidation is a popular method for controlling volatile organic compound (VOC) emissions.During the past 25 years, industry has made progress in ...


    By The CMM Group, LLC

  • Case study - Heat exchanger retrofit

    Overview A manufacturer of insulation films for the electronics industry needed to evaluate the capabilities of four existing oxidizers that treated emissions from its coating lines. The company was concerned that, due to oxidizer deficiencies, it would not meet regulatory requirements. The oxidizers had been manufactured by two different companies. One of them was no longer in business; ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you