ultrasonic flow sensor Articles

  • The Function of an Ultrasonic Flow Meter

    Running a water management operation requires taking a wide range of measurements. In addition to measuring the flow in your system, many systems must measure the water level of their channel, and one of the best tools for accomplishing this goal is an ultrasonic flow meter. ...


    By TRACOM Inc.

  • What are the advantages of ultrasonic wind sensors?

    Whether mechanical, ultrasonic or laser wind measurements: All measuring methods have technical limits. While for mechanical wind sensors the measuring element – cups and vanes – itself predominantly produces a disturbance in the flow field, for ultrasonic anemometers a disturbance can be caused by the sensor holder or housing construction. Only optical methods, e.g. LDA (Laser ...

  • Making Ultrasonic Liquid Flow Meter Installation Easier

    Ultrasonic transit-time flow meter technology is becoming one of the most adopted technologies for accurate liquid and energy/BTU measurement. Although a major benefit of the technology is that it is non-invasive and can be clamped to the outside of the pipe, an inherent challenge with ultrasonic clamp on liquid flow meters is finding the best location to measure the liquid. This means ...


    By Sierra Instruments, Inc.

  • Open Channel Flow - The use of Level sensors for open channel flow measurement

    Open Channel Flow - The use of Level sensors for open channel flow measurement Level sensors from SolidAT are implemented in Open Channel Flow applications. In these types of applications, the level sensor is installed above a special water flow structure and accurately measures level of flowing water or wastewater. The sensor then calculates flow through the structure ...

  • Online discharge measurement with horizontal doppler-flow sensor

    Background The regional authority responsible for the barrages in the Free State of Saxony is in charge of the water management of the Rötha. Reservoir. This reservoir is situated close to the river Pleiße, from which the water is led over a weir into the reservoir.. Knowledge about the inflows of the reservoir is important for the water management there. So far, the ...


    By OTT HydroMet

  • Two Technologies for Flow Measurement from Outside a Pipe

    Doppler and Transit Time are two very popular types of flow meter for non-invasive measurement of flow in full pipes. We tend to confuse these technologies because they are both ultrasonic and both measure flow by using sensors clamped onto the outside of a pipe. In the real world they actually work best in opposite applications. Success in your installation depends on understanding the ...


    By Greyline Instruments Inc.

  • AVFM 5.0 area-velocity flow meter monitors sewage lagoon discharge flow - Case Study

    The Township of South Glengarry in Eastern Ontario discharges continuously from their 72,000 m3 sewage lagoon. But they ran into flow measurement problems when their magnetic flowmeter was unable to detect seasonal low flow rates. Operations Manager, Shawn Killoran selected a Greyline AVFM 5.0 Area-Velocity Flow Monitor because it was simple to install in a horizontal discharge pipe from the ...


    By Greyline Instruments Inc.

  • Lagoon Discharge Flow Monitoring - Case Study

    Open Channel Flow Monitoring without a Flume or Weir Township operators liked the Greyline AVFM 5.0 datalogger reporting system where formatted flow reports (total, minimum, maximum and average) could be downloaded automatically to a USB memory stick without carrying a laptop to the site. The Township of South Glengarry in Eastern Ontario discharges continuously from their ...


    By Greyline Instruments Inc.

  • Core technology part 2: transit-time ultrasonic

    Since the introduction of ultrasonic transit-time flow meters, manufacturers have continually improved their measurement and signal processing capabilities. Recent advances in digital correlation transit-time technology allow customers to use this convenient, non-intrusive installation to address some of the more challenging flow applications. Ultrasonic flow meters are divided into two ...


    By Sierra Instruments, Inc.

  • Online flow measurement

    Background The undershoot weir in Hohensaaten was built in 1913. It has three openings and regulates the discharge from the Oderbruch and from the Finow canal into the Hohensaaten-Friedrichsthaler-waterway. Moreover, it protects parts of the Oderbruch against Oder floods. The weir controls the waterlevels in the Havel-Oder-waterway and in the reach of Niederfinow- Hohensaaten. ...


    By OTT HydroMet

  • Metek Introduces the New Multi-Path Ultrasonic Anemometers

    Our news report about recent instrumentations or measurements of our customers which might be of special interest for other web site visitors. The reports are added on the fly whenever we have received such information. The experienced support is highly welcome and appreciated. Metek is proud to present the new members of the uSonic-family: The ultrasonic anemometers uSonic-3 Class A ...

  • Effective monitoring improves sewage flow management case study

    SmartScan 50 introduces an effective solution for flow measurement of sewage water in one of Poland's municipal waste water treatment plant. The city of Zblewo, Poland provides waste water treatment services to its inhabitants. The plant sought an ultrasonic measurement solution for monitoring the raw sewage flow during the treatment process. The problems When entering the ...

  • DFM 5.0 doppler flow meter for frac sand slurry flow monitoring - Case Study

    CanFrac Sands Ltd. of Lloydmister Saskatchewan (Canada) needed a flowmeter that could accurately measure sand slurry flow without being damaged by this highly abrasive product. They selected the Greyline DFM 5.0 Doppler Flow Meter with a clamp-on ultrasonic sensor mounted on the outside of a pipe. CanFrac produce “fracturing sand” used by the oil and gas industry. This special type of ...


    By Greyline Instruments Inc.

  • VIDEO: Mass Flow Meters for Power Plant Applications

    Generating electricity in a natural gas power plant is a complex process due to the multiple steps involved with the different types of fluids being used and optimized. Dr. John Olin, Founder of Sierra Instruments, explains how thermal mass flow meters, vortex flow meters, and ultrasonic flow meters can improve the flow energy management in power plant ...


    By Sierra Instruments, Inc.

  • NIVUS Pipe Sensor vs. Mag Meter

    The benefits of using our solution are numerous, in terms of ease of use, accuracy, cost, time and low carbon footprint so to offer a direct comparison to the usual time and cost implications of traditional Mag Meter replacement water companies typically incur significant costs namely excavation, over pumping and related downtime often making such projects even cost prohibitive. NIVUS Cross ...


    By NIVUS GmbH

  • Permanent Multipath Clamp-On Transit Time Flow Meter

    For many years now, ultrasonic flow measurements with "wetted" sensors have been a well established procedure to measure discharge in big pipes in the field of hydro power plants. A lot of research studies show that very precise measuring results can be achieved, under the provision of correct application and consideration of diverse ancillary conditions. Depending on the flow conditions and the ...


    By HydroVision GmbH

  • Flare gas mass flow metering innovations promise more economical choices

    INTRODUCTION As the drive towards energy independence in the United States continues at full speed, oil and gas companies are turning to hydraulic fracturing to increase production. Increasingly stringent state and national regulations for flare gas in particular now require the installation of mass flow measurement instruments to measure waste and excess gases burned off as a result ...


    By Sierra Instruments, Inc.

  • Gas Mass Flow Metering - Innovations Promise More Economical Choices- White Paper

    Introduction As the drive towards energy independence in the United States continues at full speed, oil and gas companies are turning to hydraulic fracturing to increase production. Increasingly stringent state and national regulations for flare gas in particular now require the installation of mass flow measurement instruments to measure waste and excess gases burned off as a result ...


    By Sierra Instruments, Inc.

  • Open Channel Flow Monitors retired after 16 years continuous service - Case Study

    Long Sault WWTP Influent Flow Monitors Greyline Open Channel Flow Monitors were installed at the Wastewater Treatment Plant in Long Sault, Ontario when the SBR plant was originally commissioned in 1995. But after 16 years of continuous service, components for the old models became obsolete. Plant operators Caneau Water and Sewage Inc. decided to replace the instruments and new Greyline OCF ...


    By Greyline Instruments Inc.

  • Non-contacting solution for Plugged off flow meters in the oil patch - Case Study

    For years Petrobakken Energy Ltd. used inline turbine flow meters to track the flow rate of oil recycled to treaters. But with a high concentration of wax and sand in the oil, the turbine meters were quickly plugging off. The line had to be shut down at least once a day and the turbine flowmeters disassembled for cleaning. This was troublesome and expensive. Petrobakken knew there had to be a ...


    By Greyline Instruments Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you