used thermal oxidizer Articles

  • Thermal Oxidizer

    THERMAL OXIDIZER   PRINCIPLE OF COMBUSTION The primary function of the Thermal Oxidizer is to destroy the contaminants in the exhaust coming out of a process.  The operation of the Thermal Oxidizer is based on the principle of combustion.  The process of combustion is the most commonly used method to control emissions of organic compounds. ...


    By Epcon Industrial Systems, LP

  • Regenerative Thermal Oxidizer

    PRINCIPLES OF COMBUSTIONThermal oxidation technology has proven to be industry choice for destroying Volatile Organic Compounds (VOCs). The process of combustion is the most commonly used method to control emission of organic compounds.  Combustion type systems are always simple systems capable of having very high destruction efficiency.  ...


    By Epcon Industrial Systems, LP

  • Recuperative Thermal Oxidizers for Coffee Roasting

    Coffee Roasting Company Epcon has extensive experience in designing and building Recuperative Thermal Oxidizers for the Coffee Roasting Industry. The Problem A leader in the Coffee Industry needed equipment to control odor and eliminate VOC's from Coffee Roasting. The company went out seeking the technical solutions and went to several manufacturers to ...


    By Epcon Industrial Systems, LP

  • Regenerative Thermal Oxidizers for Midstream Industry

    Midstream Company Epcon has extensive experience in designing and building Regenerative Thermal Oxidizers (RTO's) for the Midstream Industry. The Problem A leading Midstream company needed equipment to achieve higher DRE and treat the H2S (sour gas) from their process. The company went out seeking the technical solutions and went to several ...


    By Epcon Industrial Systems, LP

  • Rto & recuperative oxidizer pros & cons - Regenerative thermal oxidizer technology

    RTO technology has been developed for large volumes and low VOC concentration air pollution applications. The best example is spray booth exhaust where the volume of exhaust is high and VOC concentration is very low. Regenerative Thermal Oxidizer technology is based on using ceramic media as heat exchangers and switching values. Advantages High thermal efficiency ...


    By Epcon Industrial Systems, LP

  • Tank cleaning - Regenerative thermal oxidizer

    Three Canister RTO for Tank Car Loading and Unloading Terminal Epcon is proud to share its case study for the Tank Truck Loading Terminal. The Problem Loading and Unloading Tank Trucks: When the Tank Trucks are unloaded, it causes a lot of vapor to be released to atmosphere. These emissions have to be controlled and can not be released to atmosphere. ...


    By Epcon Industrial Systems, LP

  • Thermal Oxidizer - Huntsman Corporation - Case Study

    Project Details Customer Name: Huntsman Corporation The Brief: Process a chemical waste liquid stream resulting from the manufacture of amines Location of Installation: Llanelli, South Wales Products ...


    By Process Combustion Ltd

  • Thermal oxidizer: Major engineering company

    The Problem A Major Engineering Company approached Epcon for a large Oxidizer System with 25,000 - 35,000 SCFM Afterburner for their Continuous Cord Resin-Impregnating manufacturing plant. The engineering company had no idea about the operating costs and they were primarily concerned with working through a lawyer that was representing this company with the State Agency. This particular ...


    By Epcon Industrial Systems, LP

  • Direct fired thermal oxidizer - Aluminum manufacturer

    Epcon has extensive experience in designing and building Air Pollution Control Systems for the Aluminum Industry. The Problem The company had a direct fired afterburner and a gas fired rotary kiln. The kiln would de-oil the aluminum scrap and the offgas would go to the afterburner. The design of the system was over 20 years old and very fuel ineffficient.   ...


    By Epcon Industrial Systems, LP

  • A Comprehensive Review Of Regenerative Thermal Oxidizers

    Within industry today, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new. In response to Congressional guidelines passed in the 1970’s, a number of companies with VOC emissions have been operating air pollution control systems of one type or another for 25 years or more. These guidelines have been revised and added to as the years progressed, making it ...


    By The CMM Group, LLC

  • Heat/Web offset printer uses the TRITON Series Thermal Oxidizer - Case study

    A heat-set/web offset printer recently installed a TRITON-Regenerative Thermal Oxidizer from Catalytic Products International, Inc. The TRITON system was contracted on a turnkey basis, in which CPI engineered and installed; the ductwork system from all dryers, foundation work, electrical integration, and rigged the oxidizer. The project was installed on time and without any added costs. The ...

  • Industrial furnace - US Government - Industrial furnace & thermal oxidizer with 2 heat exchangers

    The Problem The US Government had a need to decommission old bombs. They went to TVA, and TVA came to Epcon for a unique solution. There were 2 issues: Decontaminate the old shells What to do with the pollution In addition, because of the residual explosive charge in the bomb shells, it was imperative that the heating system was very safe, such ...


    By Epcon Industrial Systems, LP

  • The Importance of high-quality service for regenerative thermal oxidizer

    The Importance of high-quality service for Regenerative Thermal Oxidizer. Safety, efficiency and compliance among pressures facing Regenerative Thermal Oxidizer operators. As any plant or maintenance manager working in a manufacturing environment using volatile organic compounds (VOCs) could tell you, the standards for support of all equipment along the process is critical for safety and ...

  • Regenerative Thermal Oxidizer with Plate Type Heat Exchanger

    Epcon is an industry leader with extensive experience in the Coil Coating Industry. You can rely on us to understand your process and to choose the system most appropriate for your application. Our experience leads to effective solutions for the Coil Coating industry. With countless installations of industrial ovens & thermal oxidizers to meet specific needs and a long history within the ...


    By Epcon Industrial Systems, LP

  • Case study: Regenerative thermal oxidizers for coffee roasting

    Epcon has extensive experience in designing and building Regenerative Thermal Oxidizers (RTO's) for the Coffee Roasting Industry. The Problem A leader in the Coffee Industry needed equipment to control odor and eliminate VOC's from Coffee Roasting. The company went out seeking the technical solutions and went to several manufacturers to locate the best possible technology. ...


    By Epcon Industrial Systems, LP

  • Regenerative thermal oxidizer - Wastewater treatment facility

    Epcon has extensive experience in designing and building Air Pollution Control Systems for the Wastewater Treatment Industry. The Problem The water treatment plant could no longer have open storage tanks to store industrial wastewater from the refineries in the area. They were emitting VOC's from their open storage tanks and were required to reduce their VOC emissions by ...


    By Epcon Industrial Systems, LP

  • Thermal Oxidizer - Dickinson Legg - Case Study

    Project Details Customer Name: Dickinson Legg The Brief: Provide heat for drying tobacco products and oxidise waste gas. Location of Installation: China,  Indonesia, Vietnam, South Korea, Turkey, Chile, Germany, Egypt Products ...


    By Process Combustion Ltd

  • HTF-40 Thermal Oxidizer - Case Study #170303

    Project Details Location: WestColorado FlowRateLP: 3.5MMSCFD LPInletPressure(ΔP): 1psig Heating Value: 900 BTU/SCF Gas Type: Methane Carbon Credit available: Yes ...


    By AEREON

  • Electrochemical biosensor for glucose detection using zinc oxide nanotetrapods

    Wurtzite structural zinc oxide (ZnO) nanotetrapods were synthesised by a thermal evaporation method. These ZnO nanotetrapods were used for the construction of an electrochemical biosensor for detecting glucose. In the biosensor, the ZnO nanotetrapods acted as supporting materials for glucose oxidase (GOx) enzyme loading because of the large surface area to ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you